Wood shredder

BRUKS 602 CS

Condition: used, Chipper Bruks 602CS IDC000117 - drum chipper - manufacturer: Bruks - model: 602 CS - drum diameter: 600 mm - infeed opening: 540 mm X 300 mm - number of knives: 2 - maximum solid wood thickness: 180/100 - weight: 1400 kg - standart chip length: 20-35 mm - capacity: 10-20 m3/h - electric motor: 26 kW Lrodpjvldmaofx Afash - electric motor for fan: 11 kW

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual Lodpfoxiymtex Afasrh The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: excellent (used), Band saw welder Viscat model FW400 Lredpfx Aowup U Tsfaeh

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Power 30 kW Ljdpfjwk Egwsx Afajrh Max hydraulic pressure: 250 bar Torque: 11,780 Nm 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Automatic blade pressure adjustment (disc spring system)

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips Lsdpfx Aer Ak Rgjfajrh TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: excellent (used), fuel type: diesel, For sale: JENZ AZ 30 wood chipper. Mobile unit. Perkins engine. Underwent a complete overhaul 2 years ago. Ljdpfxsxpgwfo Afaorh Currently in perfect condition. Used only occasionally. Option to purchase with discharge conveyor. More photos available for interested buyers.

Condition: used, Year of construction: 2006, Bruks drum chipper Model 820CM Year of manufacture: 2006 Lrodpexr Trnofx Afaoh

Condition: good (used), Year of construction: 1996, overall weight: 9,960 kg, JENZ AZ 35 D/Electrical Issue/Shredder/Chipper • Manufacturer: Jenz • Model: AZ 35 D • Year of manufacture: 1996 Ljdpfxoxb Dkye Afaerh • Total weight: 9960 kg • Engine: Mercedes-Benz 6-cylinder • Electrical issue • Rotor and beaters in good condition • Discharge conveyor as new • Power: kW/HP • Documentation • German machine • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes reserved. - Sale according to our terms and conditions.

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Lrodpfx Afou Ix Hdeaoh Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: new, Year of construction: 2026, Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 L Description: The EVP 1500 vibratory finishing machine from ERBA features a flat working tank bottom without separation. It is ideally suited for larger and heavier workpieces. Emptying and/or separation is performed via bottom discharge (manual/pneumatic). Upon request, the machine can be equipped with reinforced suspension and a reinforced motor for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). The system can also be equipped with fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also due to the hot-cast polyurethane lining of the working tank. As an experienced partner, we offer expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net plus the currently valid statutory VAT and plus freight costs. Items shown in pictures may include accessories that are optionally available and subject to additional charges. The quoted price refers to the base machine. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). Lodpfxen Ut T Ae Afaorh This offer serves exclusively as an online presentation of our goods. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, along with information on our general terms and conditions including imprint and the right of withdrawal, before any purchase/contract conclusion occurs.