Used Aldegheri Forni Olu for sale (1,682)

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Tjdpfey Rfzusx Amkea Please contact us if the gear stages are no longer functioning correctly as intended.

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Tsdpfxsxy R Ezo Amkea

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ML0313-000510, turning length: 1,275 mm, turning diameter: 481 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, The machine has only been in operation for approximately one year! MACHINE DETAILS Power supply: AC 380 V, 3 phases, 50/60 Hz Rated power: 36.11 kVA Full load current: 54.87 A Machine weight: 6,900 kg FEATURES Tedpfxjzf I Scs Amkja CNC control with operator panel Tool turret Tailstock Spindle chuck Enclosed working area Long-bed design CE marking The following data is taken from a manufacturer's data sheet. The seller assumes no liability for its accuracy: TECHNICAL DETAILS Standard spindle chuck, main spindle: 12″ Maximum turning diameter: 481 mm Maximum turning length: 1,275 mm Travel distances Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Travel X-axis: 260 mm Travel Z-axis: 1,350 mm Main spindle Spindle speed max.: 2,800 rpm Spindle power max.: 35 kW Spindle torque max.: 1,613 Nm Tool changer Number of tools: 10 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,633 x 2,394 x 2,110 mm Machine weight: 6,900 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 770 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,661 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,100 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, Equipment: chip conveyor, rotational speed infinitely variable, Vertical CNC machining center Control: FANUC F0MF+ Accessories: Chip conveyor, hinged belt type, manufactured by Cromar CNC AutoDoor Tjdpfx Amozcpgwskea

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Todpfx Aewp Ac Hemksa Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Todpfxswwip Ae Amksa Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. Todpfxsrklxvs Amkja We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2023, Cut-to-length line 1250mm x2mm x10 t for cross cutting of coil metal with maximum width 1250mm, maximum metal thickness 2mm and maximum coil weight 10 tons. Line can be equipped with acceptance part with moving support for stainless steel or as standard acceptance table. As an option we can offer used machines for your requirements. Tjdsqlbpgopfx Amkoa Also we produce slitting lines, roll forming lines. tube mills and other sheet metal and coil metal processing machinery

Condition: new, Year of construction: 2025, Fixed clip former CF-25 was designed by our company for fixed cleat production of standing seam roofing panels with a seam high of 25mm. Following clip is the main fixation element that ready roofing panel fastens to the roof base. A fixed clip has many advantages, such as simple design, low production cost, easy installation. Tedpeqxadbefx Amksa We make clip formers for 25, 27 or 39mm clip highs. As blank, you can use metal in strips of the required width with up to 0.8 mm thickness. You can make product clip in one easy step -just need to put blank metal into the press and activate the press with manual handle system. Clip former makes clip bending and necessary holes cut in one-step operation. Thus, with our clip production press customer has opportunity to produce a fixed clamp in numbers, using it for his own needs or to sell it for other roofing installation companies. Fixed clip former is lightweight one, which allows taking device to working places and transport it easily. For productive work, clip former must be securely fastened to a flat surface. Fixed clip former press CF-5 made by our company will save your time and money from looking for standing seam fixation elements suppliers, will help you effectively organize your product production and will make roofing works more convenient. We also manufacture sliding clip formers. As an option we can make fixed clamp former for standing seam panels of 25, 27mm or 39mm lock high, those panels you can make with following machines: Standing seam roofing machine F3; Roof panel standing seam roll forming machine F3-27 with clip relief; Standing seam roll former F3-39;

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Tedpfxsqxalxo Amkea Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. Tedpfjqxandox Amkja As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Some of lines we have ready on stock. Tjdpfx Aekhaadjmkoa Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. To get more information about our machinery please contact our sales department

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. Tsdpfx Amjp Stgnsksa In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps. Tjdpslwt Adofx Amkea

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Tedoh R I Iuspfx Amkea Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. As additional options with F3 machine you can get: length measuring device ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Todpfxjh Aw Rns Amkea Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Tjdpjrqg U Dsfx Amkja

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. Tedjm Twnlspfx Amkea The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; Tsdpfehz Twwox Amkoa cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Tedpfx Ajq U N T Rjmkja Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. Tedpfx Amsf Epzcjkja The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Todpef Ih Hcjfx Amkea Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: used, Year of construction: 2025, New exhibition machine! List price €17,380 net. MOVE – the highly precise vacuum press with an enormous working area for vacuum forming and vacuum veneering of curved workpieces. Featuring comprehensive flexibility due to its absolute mobility and revolutionary folding mechanism, which reduces the base area to 45% when folded. High-precision vacuum press with flap opening, including: revolutionary folding mechanism (reduces the base area to 45%) 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) – by BECKER optional, automatic shutdown when pressure is reached (for large vacuum volume) Pressure regulation from 400 to 900 mbar, analog vacuum pressure display highly elastic natural rubber membrane (up to +130 °C) Membrane quick-change system stable phenolic resin worktop (up to +120 °C), 15-layer glued gas pressure dampers for flap opening vacuum pressure display connection for an external vacuum bag easy-rolling swivel casters FESTO pneumatics and SIEMENS electrical engineering Technical data and dimensions: Working area: approx. 3050 x 1350 mm Internal frame dimensions: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1780 mm Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 kg Todpfx Asyi Hd Hemkoa Storage location: Rieth

Condition: like new (used), Year of construction: 2016, functionality: fully functional, ecnoforni FEC industrial electric kiln in very good condition. Three-phase power supply, 28 kW, maximum temperature 1100°C. Suitable for ceramics, refractory materials, and industrial thermal applications. Reliable machine for workshop or production use. Tedsy I N Rujpfx Amksa

Condition: used, functionality: fully functional, A set of 24 industrial axial fans from an active shipyard operation. The set mainly includes large axial fans with protective grilles (see photo), as well as two blue/black high-performance blowers. Suitable for: - Ventilation of halls/workshops - Drying of components, paint booths, renovation sites - Ventilation of construction sites, tunnels/tanks - Event technology, cooling, emergency ventilation - Shipbuilding / shipyards Preferably sold as a set (entire lot). Individual units can be sold separately by arrangement (approx. 100 EUR per unit). All devices are functional, with minor signs of wear typical for shipyard use. Originates from the shipyard operation of Strela Shiprepair GmbH (Stralsund). Technical data: - Quantity: 24 units - Design: Axial fan with protective grille - Application: Industry / construction / shipbuilding / event technology - Storage: in wire mesh box (included) - Connection: 230 V / 400 V (mixed assortment, check on site) Collection / Transport: Self-collection in Stralsund. Wire mesh box (steel) included on request. Shipping via freight forwarder on pallets by arrangement (several pallets). Total price 2,400 EUR net, negotiable, for all 24 units + wire mesh box; individual sale approx. 100 EUR/unit. Contact: [NAME], Tel. [TELEPHONE], [EMAIL] Tsdpfx Ajzawhwomkja