Used Bodor Hydraulic Press for sale (26,531)

Year of construction: 1998, condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Dsdpfx Ajttbd Teptjwb

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm Dwjdow U U Svepfx Apteb column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: used, Year of construction: 2003, Technical details: Pressure: 60 t stroke: 400 mm table surface area: 700 x 700 mm passage opening in table: Ø 100 mm distance between columns: 700 mm distance between columns: 700 x 1300 mm table height over floor: 850 mm dayligth: max. 1150 mm Dodpfxszvnrde Aptowb daylight dimension : table/slide up: 400 - 800 mm cylinder diameter: Ø 110 mm total power requirement: 4,8 kW machine weight approx.: 930 kg dimension machine approx.LxWxH: 1,2 x 0,7 x 3,0 m HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 120 mm Hydraulic unit *

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm Dedpfxexcblwj Aptjwb mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: like new (used), Year of construction: 2026, power: 3 kW (4.08 HP), pressing force: 30 t, stroke length: 150 mm, operating speed: 10 mm/s, reverse speed: 70 mm/s, throat depth: 255 mm, ram plate length: 1,270 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 150 mm Distance Between Upper and Lower Dies (Daylight): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features Double-cylinder upper beam bending system Steel frame construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balancing shaft and eccentric bearing system supporting parallelism Motor-controlled angle adjustment with a mechanical stroke system inside the cylinder Wide opening and high stroke suitable for use with different dies Dodezcl S Nepfx Aptswb Easy tonnage adjustment and bottom dead center stop via NC control Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant, multi-functional foot pedal with emergency stop Compact hydraulic power unit, top-mounted, with HAWE or Rexroth components Siemens, Pizzato, and Balluff electrical components LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines per program Program transfer via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (500 mm) Back gauge system with linear slides 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear slides Lower die centering bolts Programmable, precise back gauge retraction function Optional Equipment Motorized R-axis Special bending dies Special pedal system with dual-hand + foot control DSP or Fiessler safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 30 tons Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Free Descent Speed: 70 mm/s Throat Depth: 255 mm Distance Between Upper and Lower Dies: 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X-Axis Motor: 0.55 kW Y-Axis Motor: 0.18 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Djdpfxsxlp T Io Aptjwb Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 175 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, throat depth: 410 mm, ram plate length: 3,700 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake The HPB B175-3700 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise and repeatable sheet metal bending operations, offering a bending force of 175 tons and a bending length of 3700 mm. Standard Features: Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 3700 mm Distance Between Columns: 3200 mm ESA S830 CNC Control Unit 10” 2D Touchscreen Manual bending sequence and collision control Automatic compensation calculation Angle measurement and correction 2D drawing 2 USB ports Offline software CT-BEND Servo Motorized Back Gauge X-axis: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm R-axis: 250 mm Hardened ball screw Linear slide system Optional X-axis: 1000 mm Tooling System 2 back gauge fingers European-type Promecam quick die clamping system CRONOSSTECH special narrow lower table Eurostamp ES1260 upper die Eurostamp ES2067 lower die Amada compatible tooling system Standard Equipment B Series open frame design GIVI linear scales LED lighting VDE electrical panel Schneider or Siemens electrical components HAWE hydraulic block Eckerle pump Siemens drive Single pedal system Energy-saving Standby function 2 adjustable front support arms Optional Features CT-BEND X+R servo motorized back gauge AKAS II front safety laser system Dwjdpfx Apszb Inkstsb PLC safety module Rear light curtains Delem DA53Tx CNC control unit CNC controlled motorized compensation system X-axis 1000 mm extension Technical Specifications Bending Force: 175 Tons Bending Length: 3700 mm Distance Between Columns: 3200 mm Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Table Height: 955 mm Machine Length: 5300 mm Machine Width: 2430 mm Machine Height: 2990 mm Approach Speed: 180 mm/s Return Speed: 130 mm/s Bending Speed: 10 mm/s Oil Tank: 180 L Weight: 10,500 kg Main Motor: 15 kW X-axis Speed: 300 mm/s R-axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. The country of origin is Turkey. 🇹🇷

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 100 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,600 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake Dwedpfezbyt Ssx Apteb Standard Features Stroke: 260 mm Bottom – Top Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 2600 mm Distance Between Columns: 2150 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pcs Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the molds to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Cabin Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel according to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 pcs standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System MVD cammed and G.E.C. motorized system Automatic calculation by CNC Faster adjustment time Higher bending accuracy Longer machine life AKAS (FPSC) Front Safety Laser System + Rear Light Curtain Laser-based finger protection system Increases operator safety Fast detection and response time CE compliance Maximum working distance: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 2600 mm Distance Between Columns: 2150 mm Stroke: 260 mm Bottom-Top Die Gap (Daylight): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 4220 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Pressing Speed: 10 mm/s Return Speed: 135 mm/s Oil Tank Capacity: 170 L Machine Weight: 6430 kg Main Motor Power: 7.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 1,250 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake The HPB A60-1250 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precision sheet metal bending applications, offering a bending force of 60 tons and a bending length of 1250 mm. Thanks to the ESA S630 CNC control unit, servo-motor driven back gauge system, compact frame structure, and professional tooling equipment, it provides high precision and efficiency for workshops, metal processing companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Bottom – Top Die Gap): 415 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 130 mm/sn Accuracy: ±0.10 mm Manual R-axis movement: 190 mm Steel frame construction Hardened ball screw spindle Hardened linear slide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Manual Promecam Upper Die Holder E7 Quick tool change Safe operation Structure to prevent die fall CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible A Series Open Cabinet Design CRONOSSTECH Premium open cabinet Wide field of view Ergonomic design Professional appearance Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel according to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features AKAS II Front Safety Laser System + PLC + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Technical Specifications Bending Force: 60 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight (Bottom – Top Die Gap): 465 mm Dwodpfx Apezbyu Neteb Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/sn Return Speed: 120 mm/sn Bending Speed: 10 mm/sn Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Back Gauge X-Axis Speed: 300 mm/sn Back Gauge R-Axis Speed: 250 mm/sn This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, throat depth: 410 mm, ram plate length: 6,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake The HPB B220-6100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for the precise, powerful, and repeatable bending of long sheet metal parts, featuring a bending force of 220 tons and a bending length of 6100 mm. It is suitable for applications in heavy industry, steel construction, energy, machine manufacturing, and metalworking. The machine offers high efficiency thanks to its ESA S630 CNC control unit, servo-motor-driven back gauge system, European-type die clamping system, robust frame structure, and professional equipment. Standard Features Stroke: 260 mm Bottom – Top Die Clearance: 465 mm Throat Depth: 410 mm Bending Length: 6100 mm Distance Between Columns: 5100 mm ESA S630 CNC Control Unit 10” 2D Touchscreen Graphical Display Manual bending sequence and collision control calculation Angle correction calculation Angle measurement and correction 2D drawing 2 USB ports Offline software CT-BEND Servo Motorized X-Axis Back Gauge X-axis travel distance: 750 mm X-axis speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame Hardened ball screw spindle Hardened linear guides Optional X-axis: 1000 mm Die and Back Gauge System 2 flat-type, 3-stage back gauge fingers Manual Z-axis movement European-type quick Promecam upper die clamp CRONOSSTECH special narrow lower table Standard upper die ES1260, H: 67 mm, 85°, R: 0.8 mm Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm Amada-compatible tooling system Other Standard Equipment B-series open cabin design Black plexiglass protective panels Single pedal system GIVI linear scales Upper beam LED lighting VDE electrical panel Schneider or Siemens electrical equipment Hoerbiger / HAWE hydraulic block Eckerle pump Siemens drive Energy-saving standby function 2 standard sliding front support arms Optional Features AKAS II front safety laser system + PLC + rear light barriers Delem DA53Tx 15” CNC control unit Delem DA58Tx 18.5” CNC control unit CNC-controlled motorized crowning system X-axis extension option up to 1000 mm Additional front support arm Additional back gauge fingers Custom bending dies Technical Specifications Bending Force: 220 Tons Bending Length: 6100 mm Dwsdozbyvtepfx Aptsb Distance Between Columns: 5100 mm Stroke: 260 mm Bottom-Top Die Clearance: 465 mm Throat Depth: 410 mm Table Height: 1060 mm Machine Length: 7560 mm Machine Width: 2570 mm Machine Height: 3440 mm Approach Speed: 150 mm/s Return Speed: 110 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 290 L Machine Weight: 20,000 kg Main Motor Power: 22 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. The country of origin is Turkey.

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), pressing force: 40 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 1,250 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB A40-1250 – 40 Ton x 1250 mm CNC Hydraulic Press Brake The HPB A40-1250 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precision sheet metal bending applications, offering a bending force of 40 tons and a bending length of 1250 mm. Thanks to the ESA S630 CNC control unit, servo motor-driven back gauge system, compact body structure, and professional tooling equipment, it provides an efficient solution for workshops, metal processing companies, and industrial manufacturers. Standard Features Stroke: 210 mm Distance between Upper and Lower Dies (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSS Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R-axis movement: 190 mm Steel body construction Hardened ball screw Linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Flat type 3-step (10 mm / 20 mm / 30 mm) Manual Z-axis movement European Type Manual Promecam Upper Die Holder E7 Quick tool change Safe operation Structure preventing the dies from falling CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Maximum capacity: 80 Ton/Meter A Series Open Cabin Guarding CRONOSS Premium open cabin Wide field of vision Ergonomic design Professional appearance Single Pedal System (P2) Encoder Linear Scales Upper Beam LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Energy-Saving Standby Function 2 Sliding Front Support Arms Height adjustable Scale measuring system Operator support system Optional Features Dwjdozbrcrepfx Aptsb AKAS II Front Safety Laser System + Rear Light Curtains AKAS® II laser safety system Finger protection system Laser protection in line with the upper die Increases operator safety CE conformity Maximum working distance: 4.3 meters Technical Specifications Bending Force: 40 Tons Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 270 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 3,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B270-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, machine manufacturing, and precision sheet metal forming applications, offering a bending force of 270 tons and a bending length of 3100 mm. Standard Features Stroke: 260 mm Daylight (Distance between Upper and Lower Die): 465 mm Throat Depth: 410 mm Bending Length: 3100 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Djdpezbrc Sofx Aptewb Manual bending sequence and collision control calculation Automatic angle correction (camber compensation calculation) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm R-axis travel distance: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-step (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam Type) Quick tool change Secure locking system Practical operation European Type Narrow Lower Table 70 mm or 90 mm special lower table T-slots can be applied according to tooling requirements Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Tons/Meter Amada compatible B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment High-quality hydraulic block system Eckerle hydraulic pump Siemens main drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measuring system Optional Features Servo Motorized X + R Axis Back Gauge System Servo-controlled X-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm R-axis travel distance: 250 mm Hardened linear guides and ball screw system X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System Motorized cam system Automatic calculation by CNC Faster adjustment time Higher bending accuracy Longer machine life Front Safety Laser System + Rear Light Curtains Laser-based finger protection system Increases operator safety Fast detection and response time Maximum working distance: 4.3 meters Technical Specifications Bending Force: 270 Tons Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 960 mm Machine Length: 4840 mm Machine Width: 2500 mm Machine Height: 3040 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 290 L Machine Weight: 12,300 kg Main Motor Power: 22 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise sheet metal bending applications, offering a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Daylight (Distance between lower and upper die): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement Dwodpfx Apszbrfaoteb X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA53Tx CNC Control Unit (15” Touchscreen) 15” color touchscreen 2D product drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and fault management Technical Specifications Bending Force: 60 Ton Bending Length: 2100 mm Distance between Columns: 1600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 100 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 40 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Distance between upper and lower die (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D touchscreen graphic display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European-Type Quick Tooling Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Short Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel in accordance with VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measuring system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Back Gauge System Servo motorized X and R axis movement X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety Dwodpszbrf Tefx Aptjb CE compliance Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touchscreen graphic display 2D drawing and 3D visualization / product simulation User-friendly interface 1 GB hard drive Automatic bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Ton Bending Length: 2100 mm Distance between columns: 1600 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Dsdpfx Ajw R Aamoptewb Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective If you have any questions or require further information, please do not hesitate to contact us. Djdpszub Nmofx Aptewb

Condition: new, functionality: fully functional, Year of construction: 2026, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, reverse speed: 14 mm/s, total length: 1,150 mm, total width: 850 mm, total height: 1,800 mm, Special Offer – 5% Discount Available! Hydraulic C-Frame Press – 250 kN (25.5 Tons) The Hydraulic C-Frame Press is a professional industrial machine designed for precise pressing, straightening, bending, assembling and forming operations. Its open C-frame construction provides excellent access to the working area, allowing convenient machining of larger workpieces and easy material handling from multiple sides. The rigid welded steel frame ensures maximum stability, durability and long service life. The precision hydraulic system provides smooth control of both pressing force and ram speed, delivering reliable performance and high machining accuracy. This versatile press is suitable for industrial production, maintenance departments, tool rooms, metalworking workshops and automotive applications. Main Features * Pressing force of 250 kN (approx. 25.5 tons) * Open C-frame design * Heavy-duty welded steel construction * Precise hydraulic control * Smooth ram movement * Excellent access to the working area * Suitable for industrial and workshop applications * CE certified Technical Specifications * Pressing force: 250 kN (approx. 25.5 tons) * Maximum hydraulic pressure: 25 MPa * Maximum opening: 500 mm * Ram stroke: 200 mm * Table dimensions: 500 × 400 mm * Throat depth: 200 mm Djdpfx Ajyr Ek Rjptswb * Downward speed: 10 mm/s * Return speed: 14 mm/s * Motor power: 3 kW * Packed dimensions (L × W × H): 1150 × 850 × 1800 mm Applications * Pressing * Bending * Straightening * Assembly operations * Metal forming * Metalworking workshops * Automotive industry * Tool rooms * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: new, pressure 20,0 t stroke 185 mm table surface area 170 mm Breite column travel between the guideways 510 mm Dodpfexaapcsx Aptswb weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame

Condition: new, Year of construction: 2025, functionality: fully functional, Jacking , Hydraulic drilling Hydraulic jacking machine used to make passages under roads , tracks , entrances , sidewalks and other terrain obstacles to lay telecommunications , water and sewage and electrical installations . Installations are laid in a way that does not damage the pavement. Basic advantages: 1/ High power of the device up to 32 tons 2/ Length of jacking up to 150 mb /depending on the ground/. 3/ Small dimensions and weight 4/ Possibility of power supply from excavator, mini-excavator, hydraulic unit, agricultural tractors, HDS equipment, 5/ Simple operation 6/ Ability to pull in several pipes simultaneously 7/ Does not require servicing Complete set ready to work includes: 1)Hydraulic jacking machine 2)Supply hoses 10 m.b. 3) Widening heads 80,110,130 5) Rods quantity 10 mb Dodpfx Apou Hylxetowb Basic technical data: 1- Standard dimensions -890x550x450 mm 2-Weight depending on the model from 150 kg to 350 kg 3-Pushing force 32 tons 4-Pulling force 24 tons 5-Maximum diameter of the installed pipe 300 mm (depending on the ground) I invite you to contact me by phone for more information.

Condition: new, Year of construction: 2025, power: 22 kW (29.91 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, table height: 955 mm, throat depth: 410 mm, working width: 3,100 mm, bending force (max.): 320 t, distance between stands: 2,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick die clamping system • Sliding front support system Dwjdpfx Ajx Nn Easptjb • Manual crowning system (Original WILA cam lock) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel die • Backgauge X travel distance 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Descent Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank Capacity (Lt) 290 Machine Weight (kg) 14,700 Main Motor Power (kW) 22 CNC Control Unit ESA S640 CNC Axis Configuration Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Laser front safety Origin Turkey

Condition: new, Year of construction: 2025, power: 18.5 kW (25.15 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, table height: 965 mm, throat depth: 410 mm, working width: 4,100 mm, bending force (max.): 220 t, distance between stands: 3,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, STANDARD FEATURES CNC-controlled hydraulic press brake CNC control of Y1 – Y2 – X – R axes (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo-motorized back gauge Back gauge travel distance: X axis: 750 mm R axis: 250 mm Back gauge system with ball screw spindles and linear guides Sliding type front support arms Manual crowning system (wedge type) Narrow European-style lower table European-style quick-release upper tool clamping system (Promecam type) High-precision linear encoders Standard upper punch (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4 grooves V: 16 / 22 / 35 / 50 mm) Front safety system with laser beam LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES 4 / 6 / 8-axis back gauge systems starting from X + R Extension of the X-axis back gauge travel up to 1000 mm Additional back gauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide lower table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet with air-conditioned cooling system Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (distance between lower and upper dies): 515 mm Dwsdjx Nqqrspfx Aptjb Throat depth: 410 mm Table height: 965 mm Back gauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/sec Working speed: 140 mm/sec Return speed: 10 mm/sec Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Condition: new, Year of construction: 2025, power: 15 kW (20.39 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 935 mm, throat depth: 410 mm, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • 4-axis CNC control Y1, Y2, X, R (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo-driven back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support arms • Manual crowning system (Original WILA wedge type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel, V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge configurations starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Large lower table for multi-channel dies Dwodpfjx Nn U Uox Aptjb • 1000 mm X-axis back gauge travel • AKAS or DSP laser front safety system • Additional back gauge fingers • Additional back gauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 175 Bending Length (mm) 3100 Distance Between Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 180 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (Lt) 180 Machine Weight (kg) 9700 Main Motor (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Country of Origin Turkey

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 935 mm, throat depth: 410 mm, working width: 3,100 mm, bending force (max.): 135 t, distance between stands: 2,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven back gauge (X=750 mm, R=250 mm) with ±0.03 mm accuracy • European-style Promecam quick-release tooling system • Sliding front support system • Manual crowning system (Original WILA wedge) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel, V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options from X+R onwards Dedpfex Nn N Ejx Aptewb • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel tooling • Back gauge X distance up to 1000 mm • AKAS or DSP front safety laser system • Additional back gauge fingers • Additional back gauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 135 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Daylight) (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 210 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 180 Machine Weight (kg) 8350 Main Motor (kW) 11 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axis) Back Gauge X stroke (mm) 750 Back Gauge R stroke (mm) 250 Crowning Manual (WILA wedge) Safety System Front laser safety Origin Turkey

Condition: new, Year of construction: 2025, power: 30 kW (40.79 HP), stroke length: 310 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table height: 1,055 mm, throat depth: 510 mm, working width: 6,100 mm, bending force (max.): 400 t, distance between stands: 5,100 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) • Narrow bottom table (European type) • GIVI brand linear encoders • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Backgauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide bottom table for multi-channel tooling • Backgauge X distance up to 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 6100 Distance Between Side Frames (mm) 5100 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank (L) 400 Machine Weight (kg) 33000 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Dsdpfx Apjx Nn Systjwb Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Condition: new, Year of construction: 2025, power: 30 kW (40.79 HP), stroke length: 310 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table height: 985 mm, throat depth: 510 mm, working width: 4,100 mm, bending force (max.): 400 t, distance between stands: 3,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge-type) • Narrow lower beam (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Rear backgauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower beam for multi-vee die • Backgauge X-axis distance 1000 mm • AKAS or DSP front laser safety system • Additional backgauge fingers • Additional backgauge stops Dwedpfxjx Npalo Aptob TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Daylight Opening (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Machine Weight (kg) 22500 Main Motor Power (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge-type) Safety System Front laser safety Origin Turkey