Used Cascade Side Shift for sale (21,890)

Condition: new, Year of construction: 2025, color: white, new (ONE-WAY) 20FT OPEN SIDE CONTAINER 1x side fully openable via 2 folding doors 2x available = Further information = General information Year of manufacture: 2025 Model year: 2026 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Unladen weight: 3,080 kg Payload: 27,400 kg Gross weight: 30,480 kg Kjdpfxey I Ut Uj Afdenb Condition General condition: very good Technical condition: very good Visual appearance: very good Further information Please contact Arne Honingh for more information.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, Knedpfx Aszuykvsfdeb manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Kjdpfx Afozuyp Ejdonb Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Kedpfx Afezuyqijdenb Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 1998, Four-sided planing machine Ksdpfx Aezuzfuefdenb Manufacturer: Weinig Type: P 23 E Year of manufacture: 1998 Technical data - Working width: 230 mm - Working height: 8-120 mm - Number of spindles: 5 (top, right, left, bottom, top) - Spindle speed: 6000 rpm - Feed rate: 5-24 m/min - Total connected power: approx. 25 kW - Infeed table: approx. 2000 mm - Weight: approx. 2500 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1980, machine/vehicle number: 1193-1003, 6 heads stepless feed speed adjustment Kjdpfoytkchsx Afdenb electric pressure beam adjustment manual table lubrication head adjustment in two axes

Condition: used, including speed regulator and a foot. Without belt. 0,75     Kw Kjdpfszzy Afsx Afdonb

Condition: used, mileage: 62,000 km, power: 330 kW (448.67 HP), first registration: 03/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, brakes: retarder, gearing type: automatic, number of seats: 2, Equipment: crane, DAF XD 450 FAN, 6x2 Automatic transmission Retarder Steerable and liftable third axle Wheelbase 3800+1400mm Front-mounted crane PK 22002-D 5-section boom Radio Knodpfx Afezd Rh Redsb Grapple + rotator Meiller 3-way tipper Container width Side walls that can be folded and swung New TÜV inspection Errors and omissions excepted!

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 6.860 kg Axle 1: left 8 mm right 8 mm Kjdpfx Aozrk Slofdsnb Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 8,960 mm, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes = More information = Axle configuration Kedez Avw Uopfx Afdjnb Tyre size: 385/65 Make axles: BPW Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg; Steering Weights Empty weight: 8.200 kg Carrying capacity: 32.800 kg GVW: 41.000 kg Functional Tail lift: AMA, slider lift Maintenance APK (MOT): tested until 01/2027 Identification Registration number: ON-19-YF

Condition: used, axle configuration: > 3 axles, first registration: 04/2009, color: other, Year of construction: 2009, Empty weight: 12.800 kg Carrying capacity: 41.200 kg Kodpfx Aeud Rc Hofdsnb GVW: 54.000 kg Axle 1: left 9 mm right 6 mm Axle 2: left 9 mm right 10 mm Axle 3: left 5 5mm right 5 11 mm

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Kjdpfxszxchlo Afdonb Max. planing cutterhead diameter: 180 mm Spindle 2 Spindle type: Right Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 1.511.030, functionality: fully functional, planing width: 240 mm, spindle diameter: 40 mm, number of spindles: 6, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 6 Min. planing width: 44 mm Max. planing width: 240 mm Min. planing height: 18 mm Max. planing height: 150 mm Infeed table length: 1,150 mm Spindle 1 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 2 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 3 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 5 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Knjdozxch Eepfx Afdob Spindle 6 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Feed rate: Automatic Min. feed rate: 6 m/min Max. feed rate: 24.1 m/min Feed rate control: Stepless Conveyor motor power: 8.7 kW Conveyor drive: Cardan drive Diameter of feed rollers: 140 mm MACHINE DETAILS Control system: Schneider Voltage: 415 V Current consumption: 144.3 A Fuse rating: 200 A Connected load: 60 kW Diameter of dust extraction nozzle: 125 mm Lubrication system: Manual Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,800 mm Unladen weight: 2,000 kg Shipping packages: 1 unit

Condition: excellent (used), mileage: 4,96,586 km, power: 310 kW (421.48 HP), first registration: 05/2016, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 390 l, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, AdBlue, Bluetooth, air conditioning, crane, cruise control, electric window regulation, fog lights, traction control, = Additional Options and Accessories = - 12-volt socket - Aluminum fuel tank - Leaf spring suspension - Differential - Compressed air connection in the cab - EURO 6 - Speed limiter - Cup holder - Alloy wheels - Air horn - Radio/CD player - Sun visor Knedpjx N Sahjfx Afdob - Power outlets 12V + 24V + 15A - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Axle Configuration Front axle: Steered Rear axle 1: Dual tires Rear axle 2: Dual tires; Steered Weights Unladen weight: 18,820 kg Payload: 14,180 kg GVW: 33,000 kg Functional Lifting capacity: 5,290 kg Lifting height: 700 cm Crane: Palfinger Epsilon, year of manufacture 2016, behind the cab Maintenance APK (Technical Main Inspection): New TÜV (technical inspection) upon delivery Condition Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: 12 months

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2006, loading space length: 13,560 mm, loading space width: 2,450 mm, loading space height: 2,910 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 445/45 R19.5, tire condition: 20 %, wheelbase: 8,790 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Kjdpjz Diikjfx Afdjnb Axle configuration Tyre size: 445/45 R19.5 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 8.100 kg Carrying capacity: 32.900 kg GVW: 41.000 kg Identification Registration number: OJ-90-HL

Condition: good (used), mileage: 3,89,011 km, power: 310 kW (421.48 HP), first registration: 05/2018, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2018, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, trailer coupling, - Aluminum fuel tank - Brake booster - EPS - Low noise - Particle filter - Radio/CD player - Sunroof - Side door - Toolbox Suspension: Leaf suspension Front axle: Steered Unladen weight: 12,271 kg APK (Technical Inspection): valid until 05/2027 Technical condition: good Optical condition: good Reference number: 47 Vehicle number: 47 Mercedes-Benz Arocs 2642 / 6x4 / 3-sided tipper Meiller / Euro6 .: WDB96421410263778 German vehicle TÜV: 05/2027 - Inspection date: 11/2026 Transmission: Automatic Suspension: Leaf / Leaf Air conditioning Engine brake Knedpfxjzz A H To Afdsb Cruise control Emission standard EURO 6 Trailer coupling Tipper Body: Meiller Year of construction: 2018 Special equipment: Front axle load 9.0 t, Trailer brake 2 - line, Audio system: CD radio Comfort (Bluetooth), Step with handrail on the roof, Exterior mirror right with maneuvering position, Batteries arranged one above the other, CB radio, Air horns (2) on cab roof, Suspension: Front springs 10.5 t, 3 leaves, Rear axle bevel gear 390, Hydraulic pump (Meiller pump - 7 pistons - 275), Interior filter construction vehicles, Fuel tank: 390 L steel, left, Air intake behind cab, Parameterizable special module, Rear cross member reinforced, Seats in cab: Driver's seat suspension seat Comfort, Sun visor outside, Sun protection roller side window, Driver's door, Steel rims 9.00x22.5, Storage flap outside left, 12V socket in the passenger footwell, 24V socket in the passenger footwell in addition, Door extension for cab, Underrun protection rear foldable, Auxiliary heater (water), Twin-plate clutch Additional equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors elect. adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in cab, Compressed air tank steel, Cab: Width 2.30 m, Cab: Cab entry movable, Cab: Tilting device hydraulic, Cab: M ClassicSpace, Cab: steel sprung, Standard, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Leaf, Suspension: Rear springs 2x10 t, hard, Window lift electric, Windshield tinted, Generator 100 A, Gearbox 12-speed - Type: G 281-12, Urea tank (AdBlue): 60 L, Lift roof manual (steel), Info display 10.4 cm, Interior filter: Pollen filter, Body/Superstructure: Tipper, Steering assist pump unregulated, Air compressor 2-cylinder, Air dryer heated, Engine 12.8 L - 310 kW R6 Diesel (OM 471), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 131-2c, Ramp mirrors, Waste heat recovery, Rear window, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in cab: Passenger swivel seat, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Preparation toll collection, Front axle straight, Water pump regulated, Permissible total weight 26.0 t, Oil cooler gearbox No liability for printing & typographical errors, changes, prior sale and errors reserved! No liability for printing & typographical errors, changes, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: ...

Condition: used, axle configuration: 3 axles, first registration: 06/2013, color: other, Year of construction: 2013, Empty weight: 6.457 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Knjdpfx Afoyuyb Asdob Axle 3: left 10 mm right 10 mm

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: AB/165172, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 180 mm, total length of planing tables: 3,250 mm, total width: 1,050 mm, total height: 1,600 mm, overall weight: 890 kg, Equipment: CE marking, documentation/manual, Offering for sale an SCM planing machine, Sintex XL model, with a Tersa cutterhead. The machine comes from a small business and has seen little use. Year of manufacture: 2004 Planing width: 180 mm Kjdpfx Afszy R Ntsdonb Planing height: 105 mm Minimum planing width: 23 mm Minimum planing height: 6 mm Number of spindles: 4 Minimum workpiece length: 300 mm Main motor: 7.5 kW Feed rate: 6 + 12 m/min Pre-planning cutter available Manual coolant pump Motor brake available Protective guard CE marking with declaration of conformity Extended infeed table, 2300 mm Dust extraction connection: 160 mm Weight: approx. 890 kg The machine is still connected and can be tested.

Condition: used, axle configuration: 3 axles, first registration: 08/2008, color: other, Year of construction: 2018, Empty weight: 6.939 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 7 mm right 7 mm Kjdev Icbzspfx Afdsnb

Condition: used, mileage: 32,100 km, power: 220 kW (299.12 HP), first registration: 06/2024, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, total width: 2,520 mm, total height: 2,963 mm, loading space volume: 6 m³, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 600 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), M-Benz Atego 1330K Meiller Tipper VIN: 754954 Chassis / Components: * Wheelbase: 3,260 mm * Leaf spring suspension * Tires: 275/70 R.22.5 * Condition: Tires ~90%, Body ~90% * 1 x Diesel tank, plastic * 1 x Ad-Blue tank * 1 x Meiller hydraulic tank * Underrun protection, fixed * Ball hitch, vertical load 150 kg * Hydraulic connections for trailer Cab: * Cab: S Classic Space * 3 seats * Automatic climate control * Radio * AUX, USB * Manual sunroof * Cab rear wall with window * 2 x Rotating beacons Body: * Meiller three-way tipper, manufactured in 2024 * Dimensions L x W x H: 4.20 m x 2.35 m x 0.60 m * Front wall: 800 mm * Certificate: EN12642 Code XL * 3 x Tie-down points per side Engine / Transmission: * 7,698 ccm // 300 hp / 220 kW // EURO 6e * Power-Shift 3 / Automatic * Engine brake / High Performance Engine Brake * Differential lock * Auxiliary drive Weights: * Gross vehicle weight: 13,500 kg * Unladen weight: 6,785 kg * Payload: 6,715 kg Other: * German vehicle * 1 previous owner * New TÜV inspection - available upon request * 32,100 km * Top condition New main inspections / safety checks or weight adjustments are possible upon request. We will gladly assist you with obtaining export / transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! Kedpfjy Hakpox Afdjnb We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our company philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day registration / Export license plates We will gladly help you with obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: used, mileage: 9,44,932 km, first registration: 10/2017, axle configuration: 6x2, color: other, driver cabin: sleeper cab, total length: 10,600 mm, total width: 2,550 mm, total height: 4,250 mm, loading space length: 8,400 mm, loading space width: 2,250 mm, loading space height: 4,250 mm, Year of construction: 2017, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, power mirror, trailer coupling, = Additional options and accessories = - Air-suspended seats - Aluminum fuel tank - Gullet Kedpjz Aa T Hjfx Afdjnb - Immobilizer - Radio/CD/Audio system - Refridgerator = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Empty weight: 11.385 kg Carrying capacity: 14.615 kg GVW: 26.000 kg

Condition: good (used), mileage: 6,08,648 km, power: 300 kW (407.89 HP), first registration: 05/2014, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel, total length: 7,980 mm, total width: 2,550 mm, total height: 3,280 mm, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 870 mm, Year of construction: 2014, Equipment: ABS, Bluetooth, air conditioning, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Driver's card (recording device) - Fixed - Halogen lamp - Hydraulic system - Light alloy wheels - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Fabric = Notes = Number of axles: 3, Configuration: 6x4, Unladen weight: 11550 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 390 liters, Tow hitch, Axle pin diameter: 50 DIN, Fifth wheel coupling: Fixed, Number of differential locks: 2, Light alloy wheels, Suspension type: Leaf spring suspension, Type of cab: Sleeper cab, Cruise control, Driver's card (recording device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Yellow, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Bluetooth, Engine power: 300 kW (402 Hp), Fuel: Diesel, Euro: 5, Gearbox type: Telligent, Gearbox type: Mercedes Benz, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Number of sides: 3 sides, System type: ., Pump, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, MP3 // 6X4 // ALCOA'S // CARNHEL 3 WAY TIPPER // FROM FIRST GERMAN OWNER = Further Information = Gearbox Gearbox: MB, 12 gears, Automatic Axle Configuration Tire size: 315/80R22.5 Suspension: Leaf spring suspension Axle 1: Steered; Tire tread depth left: 12 mm; Tire tread depth right: 15 mm; Brakes: Disc brakes Axle 2: Double tires; Tire tread depth left inner: 10 mm; Tire tread depth left outer: 10 mm; Tire tread depth right inner: 10 mm; Tire tread depth right outer: 10 mm; Brakes: Drum brakes Axle 3: Double tires; Tire tread depth left inner: 14 mm; Tire tread depth left outer: 15 mm; Tire tread depth right inner: 16 mm; Tire tread depth right outer: 16 mm; Brakes: Drum brakes Weights Unladen weight: 11,550 kg Payload: 14,450 kg GVW: 26,000 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands across different model years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers Kjdpfx Aozmff Aefdjnb • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Inquire directly about our European warranty package.

Condition: new, power: 353 kW (479.95 HP), first registration: 01/2026, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 52,000 mm, loading space width: 24,200 mm, loading space height: 8,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors Knsdpfx Afoyllctsdjb - Passenger seat - Differential lock - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Particle filter - PTO - Radio/Multimedia system - Disc brakes - Seat heating - Sun visor - Lane keeping assistant - Stability control - Toolbox - Windshield Internal number for customer inquiries: 3-198 MAN TGS 26.480 6x4 three-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: FASSI F195A.2.24 e-dynamic Lifting moment 162 kNm (16.51 mt) Hydraulic four-stage extension boom 12.7 m e-dynamic hose system for 2 auxiliary devices Slew range 400° Double knuckle boom system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload cut-off system with FX 500 FASSI stability control FSC incl. LMB II Fassi RCS Funk maxi - 6 functions with 3 joysticks (2-2-2) Special outriggers, outrigger width 6.64m hydraulically extendable incl. FSC Outriggers can be operated via radio remote control FL system (Full Lift), switchable quick-action valve for the extension booms LED work lights Vehicle: Diesel engine MAN D2676 LFAI, 352 kW (480 hp) power, 2,400 Nm torque, Euro 6e Automatic transmission MAN TipMatic 12.26 OD Driving program MAN TipMatic Performance, Efficiency and Offroad, up to 70,000 kg Drive 6x4 Suspension leaf/air Differential locks on driven rear axles 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles 310 l fuel tank volume, 60 l AdBlue tank volume Full brake assist High-performance engine brake MAN EVBec, adjustable Disc brakes on front axle, drum brakes on rear axles Trailer coupling RINGFEDER type 4040/G150A Cab NN: the practical one (narrow, medium length, normal height) Tilt roof, mechanical Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating MAN EasyControl control panel, 4 functions, operable from the outside when the door is open Sun visor front windshield, inside, electric Cool box MAN SmartSelect infotainment control with touchpad and direct access buttons MAN Media System Navigation Advanced 7 inch MAN Sound System Advanced Navigation map Europe and Russia Online traffic for navigation function Standard extension warranty for powertrain for 3rd operating year up to 450,000 km, subject to maintenance records Superstructure: Three-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab Body: Dimensions L x W x H 4,800 mm x 2,420 mm x 800 mm (Alternatively also available: loading area length 5,200 mm x 2,420 mm x 800mm ) Front wall 1,000 mm high Special equipment: - Rear corner pillars fixed - Lifting aids for the side walls - Eight lashing eyes recessed on the left and right in the floor (4 per side) - Hydraulic crane/tipper/trailer switchable via valve in the cab - Positioning of the underrun protection, the tail lights and the supply lines on the left - Central locking for opening...

Condition: used, power: 480 kW (652.62 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,000 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, retarder, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Intarder - Air conditioning - Air-suspended seats - PTO - Rearview camera - Tow hitch X TO GO „EUROMIX TO GO“ OFFERS YOU IMMEDIATELY AVAILABLE NEW VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN URGENT SITUATION. (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT) Your advantages: - Immediately deployable complete vehicles (concrete mixers/tippers) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price-performance ratio - Financing options - Trade-in of your old vehicles Vehicle equipment: MAN TGS 35.480 8x4 BB CH New vehicle Year of manufacture: 2026 Euro 6e 480 hp (353 kW) 2,450 Nm torque 8x4 chassis Wheelbase 2,505 mm Gross vehicle weight 37,000 kg Gross train weight 35,500 kg Cab NN (medium length) Left-hand drive Color Pure White (RAL 9010) Engine & Transmission MAN D2676 inline 6-cylinder diesel engine 12.4 liter displacement Euro 6e MAN TipMatic 12-speed automatic transmission MAN Idle Speed Driving Maneuvering program Efficiency driving program High-performance engine brake MAN PriTarder with MAN EVBec Heated fuel filter Fuel pre-filter with water separator Engine oil with reduced friction Digital oil level indicator Chassis Leaf spring suspension front and rear 2 x 9.2 t front axles 2 x 13 t rear axles Differential locks rear axles Axle ratio i = 3.63 Twin tires rear Tire size VA: 315/80 R22.5 Tire size HA: 315/80 R22.5 Steel rims 22.5" Fuel system 400 liter diesel tank 35 liter AdBlue tank Lockable fuel filler cap Cab MAN NN cab Air-suspended comfort driver's seat with armrest Co-driver's seat with storage box Air conditioning Multi-function steering wheel Professional 12.3" instrument cluster Electrically adjustable and heated exterior mirrors Curb mirror Front mirror Central locking Tinted windows Sunblind, driver's side Numerous storage compartments 2 vehicle keys Multimedia MAN Media System Advanced 7" touchscreen Navigation Europe Online Traffic MAN sound system Smartphone integration (Apple CarPlay / Android Auto) Connectivity Board MAN Apps prepared Safety ESP ABS ASR Cruise control Emergency braking assistant EBA Plus Turning assistant Traffic sign recognition Front Detection Driver Monitoring System Rear view assistant Tire pressure monitoring system (TPMS) Tire pressure display for trailer LED daytime running lights Fog lights Automatic headlights with light sensor Superstructure preparation Preparation for tipper hydraulics Display of tipper operation in the cab FMS interface Data interface for tipper and engine intermediate speed Preparation for superstructure power supply Compressed air connection for superstructure Preparation for camera system Gearbox PTO prepared Engine PTO prepared Further equipment Knjdpfxjznvbke Afdob Steel bumper Front access steps...

Condition: used, mileage: 1,74,064 km, power: 206 kW (280.08 HP), first registration: 02/2008, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2027, color: green, gearing type: mechanical, emission class: euro4, total width: 2,550 mm, total height: 3,213 mm, loading space volume: 6 m³, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, MAN TGM 18.280 4x4BB Meiller three-sided dump truck with Terex crane VIN: Y205502 Chassis / Components: * Leaf spring suspension * Wheelbase: 3,900 mm * Tires: 295/80 R.22.5 * Remaining tire tread: Axle 1: 90%, Axle 2: 90% * 1 x Diesel tank * 1 x Hydraulic tank Meiller * Fixed underrun protection * 1 x Metal storage box Knodszz Dw Tjpfx Afdob Body: * Meiller three-sided dump truck * Cargo area: 4.00 m x 2.42 m x 0.60 m * Front wall: 0.80 m, side walls: 0.60 m Crane: * Terex 75.2 - A2 * Lifting capacity: 1.9 m = 3,750 kg, 3.8 m = 1,950 kg, 5.5 m = 1,320 kg * 7.2 m = 1,000 kg, 8.8 m = 770 kg Cab / Driver's Cab * TGM M-cab * Rear window / cab rear wall * Automatic climate control * Sunroof * Radio * Cruise control Engine / Transmission * 206 kW / 280 hp // 6,871 cm³ // Euro 4 * ZF manual gearbox, 8 gears * Engine brake * Differential lock * Auxiliary drive * All-wheel drive Weights * Gross vehicle weight 18,000 kg * Payload 10,025 kg * Unladen weight 7,975 kg Other * German vehicle * 1 previous owner * Technical inspection / MOT valid until 02 / New technical inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Through our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you in organizing special transports. Day licenses / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling customs formalities We will gladly help you with handling customs matters.