Used Comi-Condor Hx/Gmp for sale (414)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Lsdpfx Afjwra Ewousac Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 Lsdpfx Afei E Hzteuoac yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Year of construction: 2006, condition: excellent (used), 1 used quick steaming unit Laodpfxeikvdqo Afujc ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Year of construction: 1991, condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1991 Lasdpfx Afoi E Hz Tsusc equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings.

Year of construction: 2000, condition: used, turning diameter 530 mm turning length 1500 mm control Fagor centre height 260 mm Ledpfx Afeiu A Daoujac swing diameter 475 mm swing diameter over flat guideway 530 mm swing diameter over bed slide 315 mm bed width 350 mm spindle bore 80 mm spindle taper innen MK5 turning speeds 2 turning speed range 0-650/650-2500 U/min feed range 0 - 7000 mm/min rapid traverse 10 m/min diameter of quill 72 mm quill travel 180 mm weight of the machine ca. ca. 3,5 t dimensions of the machine ca. L/B/H 3,50x1,50x180 m

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. Ljdpfx Afexu I T Ejusac The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 150mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR150THX Powerful wood chipper for branches up to 15cm in diameter. Extremely robust and compact. -- 420 cc petrol engine with 12.4 HP -- Self-feeding no additional pressure necessary Laodet Ivl Aopfx Afuoc -- 360° ejection -- With drawbar -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL MOTOR Equipped with a 420 cubic meter petrol engine, the RR150THX wood chipper offers outstanding performance that effortlessly handles even the most demanding tasks. The engine is started conveniently via the electric starter or the cable pull. The power of the engine is transmitted to the centrifugal clutch via the V-belts, ensuring a consistently high power output. The engine also has a low oil sensor, which switches the engine off if the oil level is too low to prevent serious consequential damage. HIGH PROCESSING CAPACITY With the ability to shred branches up to 15 cm in diameter, our shredder enables efficient and versatile processing of suitable wood stocks. Thanks to the large opening of the feed hopper, optimum and convenient feeding of the material is guaranteed. The high-quality workmanship and the use of hard-wearing materials ensure a long service life for the shredder, even with intensive use. EFFICIENT CUTTING SYSTEM The blades rotate at a speed of up to 2000 revolutions per minute, which ensures fast and efficient shredding of the material and reduces working time. The blades are made of high-strength steel and are specially designed for the shredder's demanding tasks. EASY MAINTENANCE Access to key components is designed to be particularly user-friendly so that maintenance work can be carried out quickly and easily, minimizing both operating costs and downtime. HIGH MOBILITY Thanks to the integrated drawbar and wheels, the chipper can be moved and positioned effortlessly around your site, making handling, transportation and storage much easier. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150THX Drive type: V-belt 17x1255La Max. Branch thickness: 150mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 255kg Basic dimensions Total length: 2700mm Total width: 1218mm Total height: 1424mm Ejection angle: 360º Engine capacity Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 150MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Condition: new, Sanyo Denki P80B22250HXS2H AC servomotor, serial number as shown in the photo, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ledpji D Nuqofx Afusac

Condition: new, JAT 80D53-0540-D07WD-83 ECOSPEED servo motor SN:GHXXX00222662234 ,unused in opened original packaging, 100% functional, scope of delivery as per photos Laodpfx Aetfn Naefuoc

Condition: ready for operation (used), Jenaer SLML2S080P-2415-LH-X2-143, serial number: 1707VS725742, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdpfx Afoi D Iyaouoac

Condition: new, Sanyo Denki P10B13100HXS22 AC servo motor, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ljdpfx Aei D Numsfujac

Condition: new, JAT ECOSPEED 80D53-0540-D07WD-83 ECOSPEED servo motor SN:GHXXX00222662225 ,unused in opened original packaging, 100% functional, scope of delivery as per photos Lodpfetfn Irex Afujac

Condition: new, Rexroth CSHXMP5/…/ 50/..355A11/B1HXUXD6316 hydraulic cylinder MNR: R901130316, unused with signs of storage, 100% functional, scope of delivery as per photos Lasdpeulqikefx Afujc

Condition: new, HFB Thread Technology, ball screw 32x10 RH x 2310, overall length: 2310 mm, SN: 9K864, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request the costs for packaging and shipping separately! Laedpfx Afsi Ea Izjujc

Condition: ready for operation (used), Year of construction: 2009, Available immediately ex location: CNC bed-type milling machine Iberimex Model Ecomill BF 2600 Year of manufacture 2009, low operating hours Heidenhain iTNC 530 Table 2700 x 1050 mm Travel ranges X/Y/Z 2600/1000/950 mm Lsdpfxjzgagbj Afujac Table load 6 t Internal coolant supply (IKZ) 14 bar Hydraulic tool clamping SK 50 spindle taper Spindle speeds 24 - 1600 rpm Spindle drive 25 kW Chip conveyor Weight 14 t Price: €21,000 plus VAT, ex location.

Condition: good (used), Year of construction: 2014, lifting height: 10 mm, fuel type: diesel, fork length: 178 mm, Weights Empty weight: 8.350 kg Functional Lifting capacity: 4.900 kg Maximum passing height: 27,7 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Transport dimensions (LxWxH): LxB 3,37 x 2,00 m Laedpfexmh Exox Afuoc Production country: ES Additional information Please contact Christian Theißen for more information Manufacturer: Ausa Model: C500 Hx4 Year of build: 2014 Condition: Used Data: Max. lifting height: 5,48 m Lifting capacity: 4.900 kg Length forks: 1,78 m Drive type: Diesel Dimensions (without forks): LxB 3,37 x 2,00 m Building height: 2,77 m Own weight: 8.350 kg Special features: All-wheel drive selectable, 2 wheel steering, side shifter: 0.20 m, trailer operation possible. Location: 41468 Neuss: immediately available

Condition: good (used), Year of construction: 2014, lifting height: 5,400 mm, fork length: 1,800 mm, Empty weight: 3.000 kg Technical condition: good Visual appearance: good Transport dimensions (LxWxH): 3,38x1,83 Please contact Christian Theißen for more information Manufacturer: Ausa Type: C300 Hx4 Year of manufacture: 2014 Product type: Used Lajdpfsw Uf Rcsx Afusc Data: Max. lifting height: 5.40 m Lifting capacity: 3,000 kg Fork length: 1.80 m Drive type: Diesel Net weight: 5,625 kg Overall dimensions (without forks): LxW 3.38 x 1.83 m Construction height: 2.68 m Special features: Switchable all-wheel drive, street lighting, trailer operation possible. Location: 41468 Neuss Immediately available

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 1139, Print counter (m): 66,6 Lasdpfxevcxwzo Afusc Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix

Condition: used, Year of construction: 2022, operating hours: 4,456 h, 2022 | Hyundai HX520AL | Used Tracked Excavator | 4456 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 172400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 55 approved ✅ 3 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: THE PRICE OF THE MACHINE IS SOLD WITHOUT HAMMER, WITHOUT BUCKET AND WITHOUT OILQUICK QUICK CHANGE. THE OILQUICK SYSTEM AND A BUCKET ARE AVAILABLE AT EXTRA COST. THE SHEAR IS NOT FOR SALE. The machine is in good condition and fully operational. There is a minor cosmetic damage on one corner. The machine was inspected about 1,000 hours of service prior. No new flaws were detected; however, the hydraulic oil is low. Notably, the machine has been serviced and the slew ring and bucket have no significant play. These areas should remain a focus of ongoing preventative maintenance. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40825 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Ledjza E N Aopfx Afueac We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2006, functionality: fully functional, For sale: Femi N280SAHX bandsaw from 2006. I have 5 spare bandsaw blades for it. FEMI N280SAHX – a professional metal-cutting bandsaw with hydraulic lowering and cooling. Robust, precise, and ready for use. Technical specifications: - Cutting range: up to approx. 280 mm - Bevel cutting Ljdpozcriuofx Afusac - Hydraulic arm lowering - Built-in cooling - Quick-release vise with hydraulic clamping - Power supply: 400V - Roller feed system, approx. 2m long - Ability to cut at a 60-degree angle Ideal for workshops, locksmith shops, and production. Used, fully functional.

Condition: new, Year of construction: 2026, Bending machine ZB 80/3 H eco NC - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - NC control with touch screen - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. Lasdpog Ntmhjfx Afuoc - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: used, Year of construction: 2018, machine/vehicle number: Q4A181101, SIEMENS SINUMERIK 828d control system, travel ranges X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-position tool changer SK30, rigid tool clamping plate, chip conveyor KABELSCHLEPP, coolant system. Ljdpoy U R Rcsfx Afuoac

Condition: excellent (used), functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 26,390 kg, drive condition: 75 %, Year of construction: 2023, operating hours: 2,360 h, Equipment: UVV, adjustable boom, gripper hydraulics, hammer hydraulics, Hyundai, Crawler Excavator, HX235ALCR ENGINE Cummins B6.7 / STAGE V Engine Power: 173 hp (129 kW) at 2,200 rpm HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power Modes, 2 Work Modes, User Mode Variable Power Control Electronic Pump Flow Control (EPFC) Flow control for attachment mode Idle Auto Function Automatic Engine Shutdown Electronic Fan Control CAB AND INTERIOR CAB ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12V power outlet (24 VDC to 12 VDC converter) Electric horn Laodpszdrbljfx Afusc All-weather steel cab with 360° panoramic view Safety glass, toughened Windshield as a sliding window Sliding glass window (left) Lockable door Storage compartment and ashtray Transparent cab roof liner Sun visor Door and cab locks, one key Pilot-controlled joystick with pre-control pressure assist Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheater) CENTRAL MONITORING 8" LCD display Engine RPM or odometer/speedometer Engine coolant temperature gauge Maximum power Slow/fast travel speed Idle Auto Function Overload warning with alarm Engine check Air filter clogged Indicators ECO indicators Fuel level indicator Hydraulic oil temperature indicator Fuel preheater Warnings Communication error Low battery capacity Clock SEAT Mechanically suspended, heated driver's seat CAB WITH ROPS ROPS (Rollover Protective Structure) ISO 12117-2 SAFETY Work Mode Master switch, battery Rear-view camera Four front work lights (2 on the boom, 2 on the front frame) Driving alarm Electronic swing parking system Boom holding system Stick holding system Boom cylinder safety valve with overload warning device Two exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel pre-filter Self-diagnosis system Batteries (2 x 12 V × 100 Ah) Accumulator for lowering work equipment UNDERCARRAGE Lower frame cover (standard) Ground plates Triple-plate ground plates (600 mm) Track roller guides Boom 5650 mm (Variable length boom) Boom safety valves (Variable length boom) Stick 2920 mm Stick safety valve (on variable length boom) With bucket linkage Upper carriage for variable length boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for rotation function Lines for quick coupler Long crawler undercarriage with blade holder Ground plate 1 pedal (Variable length boom/2-way) Crawler tracks 600 mm (triple-plate) Front blade Reinforced lower frame plates 19 inch Kawasaki joysticks + EPFC Proportional joysticks Fine swing control Swing lock One-pedal straight-line travel system Air-suspended, heated seat SmartKey + button + auto shutdown Fuel filling pump Air compressor Hyundai HX paint With work light on the boom (LED) Work light at the front of the cab (LED) Work light at the rear (LED) All-around view monitor (AAVM) FOG protection (front and top) Laminated 7mm window glass Fuel preheater Central lubrication Beka (Variable length boom) (Europe) Hydraulic oil - VG46 Turbo II air precleaner Hydraulic quick coupler CW40 with LH, with one digging bucket

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2023, operating hours: 1,200 h, Equipment: rubber tracks, Hyundai HX130ALCR WITH CENTRAL LUBRICATION Year of manufacture: 2023 Operating hours: approx. 1000 Model: Cummins F3.8 Power: Net output of 55 kW (72 HP) at 2,200 rpm Emission standard: Certified according to EU Stage V Weight: approx. 13,500 kg Ljdpfxjyu Txbj Afusac Turbo II pre-cleaner Dipper stick: 2,260 mm Dipper stick safety valves With work lights Adjustable boom: 4,560 mm Front dozer blade Boom safety valve With bucket linkage Counterweight: 2,450 kg Standard key Front work lights LED beacon Rear-view camera Hi-mate (mobile version) Fuel pump Crawler undercarriage Standard guard rail Laminated 7-mm glass window 2-way hydraulic lines Beka central lubrication system (V) Piping for quick coupler Proportional hydraulic lines 19-inch Kawasaki joystick Bucket/grapple changeover Without slew lock Air-suspended, heated seat Hydraulic oil – VG46 Rain protection Proportional joystick Road-liner, 500 mm, 43 links Central lubrication

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Ledpfjzdqrpjx Afueac Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket