Used Correa Fp40/60 for sale (21,755)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,685 h, load capacity: 2,500 kg, lifting height: 5,180 mm, free lift: 1,760 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,380 mm, battery capacity: 620 Ah, remaining battery capacity: 93 %, battery voltage: 80 V, DGUV certified until: 08/2027, fork length: 1,200 mm, total height: 2,380 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25/600 electric forklift with the following specifications: * Operating hours: 1,685 Hsdpfx Aozfxzzsbtot * Lifting capacity: 2,500 kg * Lifting height: 5,180 mm * Overall height: 2,380 mm * Year of manufacture: 2017 STILL 2.5-ton electric forklift with a full cabin and heater, battery at 93%, tires in good condition (rear tires new), triplex mast with full free lift, side shifter, lighting compliant with StVZO regulations, fork length 1,200 mm (other fork lengths available upon request), new charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Sales are exclusively to business customers. Subject to prior sale, errors, and omissions. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). For more information about us and other offers, please visit our website.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: Hsdpfx Aszii A Rsbtjt 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Hedpfx Abozimgastst 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,003 h, load capacity: 2,500 kg, lifting height: 3,170 mm, fuel type: electric, mast type: duplex, construction height: 2,275 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 3,120 kg, total length: 2,400 mm, drive type: Elektro, construction width: 1,220 mm, Electric 4-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: very good Front tire type: Superelastic Front tire size: 23x9-10 Rear tire type: Superelastic Hodpfx Abeziraletet Rear tire size: 18x7-8 Battery voltage: 80V Battery Ah: 620Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2019 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, interior mirror, windshield wiper, single pedal, LED seat

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,854 h, load capacity: 5,000 kg, lifting height: 3,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 930 Ah, remaining battery capacity: 84 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-50 electric forklift with the following specifications: * Lifting capacity: 5,000 kg * Lifting height: 3,450 mm * Overall height: 2,550 mm * Year of manufacture: 2018 * Operating hours: 7,854 Still 5.0-ton electric forklift, very good battery, good tires (rear tires new), telescopic mast for clear visibility, side shifter, fork positioner, lighting compliant with StVZO regulations, fork length 1,200 mm, charger. Price ex works, including 1,000 hours of service according to STILL manufacturer’s specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-loader (transport costs upon request). Further information and offers can be found on our newly designed website! Hsdpfozivfxjx Abtet

Condition: excellent (used), Year of construction: 2010, 423 USED Electric rotary rack oven. Rack: 60x100 or 60x80. Price is for 1 oven. EXTERNAL DIMENSIONS (in cm): - W: 179, - L: 178 (+ hood: 234), - H: 250. TECHNICAL DATA: - Power: 75 kW / 400 V. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Hodpfxezi Dire Abtjt The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: used, functionality: fully functional, Year of construction: 1995, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Tauring, controller model: CNC3A, number of rollers: 8, pipe diameter (max.): 60 mm, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Hsdpfxozi Ew Rs Abtst Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable “tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg Hodpfxezqyw Io Abtot

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, 4 x used bitumen tanks, 60,000 liters each - complete piping system available upon request. Hodjzqu Ubjpfx Abtot

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 305 h, load capacity: 135 kg, lifting height: 2,997 mm, fuel type: electric, mast type: telescopic, construction height: 1,385 mm, empty load weight: 640 kg, total length: 1,525 mm, drive type: Elektro, construction width: 750 mm, Medium-lift order picker Mast type: Telescopic Condition: Ready for use and fully operational Technical condition: Good Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: Lithium-ion Battery year: 2023 Hodszrccpjpfx Abtst Bypass for lift/lowering cut-off: No bypass for lift/lowering Drive/lift signal: All warning signals Bumper: Bumper with rubber protection Storage compartment on right side Load platform: manually adjustable, 540 x 685 mm Flashing beacon: front & rear Operator compartment Operator login code: Access 123 German labeling Operating manual: German Paintwork: Orange Battery: 205 Ah maintenance-free Charger: 30 Amp 85-265 VAC with cable, IEC socket, with CEE 7/7 plug

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 05/2022, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. 2 temperature sensors for CargoWatch FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/24 ISO pallets. ROTOS SCB running gear (disc brakes). Tyres Information Front left - 5 mm Hsdpfx Abezrdypotet Front right - 5 mm Middle left - 8 mm Middle right - 8 mm Rear left - 6 mm Rear right - 8 mm

Year of construction: 2022, condition: excellent (used), We offer this very well-maintained EGGcellent Pollux™ 60, Pollux TM60, which makes eggs salmonella-free, manufactured in 2022. Device type: Pollux™ 60 Serial number: PX 60ST8089 Patent number: WO0201960 Single-phase voltage: 230 V Three-phase voltage: 400 V Rated power: 5 kW Description The Pollux TM60 device from eggcellent Foodservice GmbH is a professional kitchen appliance for the safe processing of eggs in the catering, hotel, and institutional food service sectors. The core of the system is the so-called Pollux process, a patented process for treating eggs directly in their shells. This involves using a precisely controlled energy or steam system (water vapor and temperature changes) to reliably kill salmonella both inside and on the shell – all without any chemical additives or radiation. New price: €9,000.00 A key advantage is that the natural structure and quality of the egg are preserved: the egg white and yolk remain liquid and separable, so the eggs can still be used as raw eggs, for example, for desserts, sauces, or dishes with partially cooked eggs. The TM60 (Pollux 60) model is designed for commercial use and can process up to 60 eggs per cycle. In addition, the device also enables precise cooking to different degrees of doneness (soft, medium, hard) as well as warming functions. This allows safe breakfast eggs or large quantities to be produced efficiently and reproducibly. The technology is internationally tested and certified, including by the SGS testing institute, and meets food safety requirements (HACCP documentation). This provides a high level of hygienic safety and allows businesses to use fresh eggs without risk while operating economically. Hjdpfxezpg Rrs Abtot In summary, the Pollux TM60 is an innovative device that makes eggs salmonella-free through controlled energy input and steam technology, without altering their properties, thus enabling a safe, flexible, and economical use of eggs in the professional kitchen. The Pollux TM60 is a device for kitchens (e.g., hotels or canteens) that can be used to make eggs safe without actually cooking them. Raw eggs can normally contain salmonella, which can cause illness. The Pollux device uses heat and steam to kill the salmonella. The temperature is very precisely controlled so that: • the salmonella is killed • but the egg does not become hard The egg therefore remains like a raw egg – the yolk and white are still liquid and can be processed as usual (e.g. for desserts or mayonnaise). In addition, the device can also cook eggs to a specific degree of doneness (soft, medium, or hard) and process many eggs at the same time (up to 60). In short: The Pollux TM60 makes eggs safe like cooked eggs, but usable like raw eggs. Pollux TM60 – Professional device for salmonella reduction of eggs – used, very good condition For sale is a Pollux TM60 from eggcellent Foodservice GmbH – an innovative professional device for the catering, hotel, and institutional food service sectors. Condition: • Used, but in very good condition • Fully functional • Normal signs of wear and tear Accessories: • 4 stainless steel trays • 30 plastic trays for eggs Please note: Collection only and no longer under manufacturer's warranty.

Condition: new, machine/vehicle number: 17279, Year of construction: 2026, load capacity: 16,000 kg, lifting height: 4,000 mm, free lift: 1,480 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,030 mm, fork length: 2,400 mm, front tire size: 12.00-20 100%, rear tire size: 12.00-20 100%, overall weight: 19,300 kg, Equipment: cabin, 5218640 Serial Number: FDC0H-5107-00494 Hjdpfxszp T Auj Abtet

Year of construction: 2021, condition: used, Roller conveyor length: 3000 mm Roller conveyor width: 400 mm Hsdpjy A Hk Iefx Abtot

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Hodpfx Aszqggvebtet Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, Year of construction: 1996, 4 used cement silos - 1 x 80-ton silo - 2 x 60-ton silos - 1 x 60-ton silo, divided into 30/30 including conveying screws and filters. Hodpfszrv Tuex Abtet

Condition: excellent (used), Year of construction: 1989, Veneer press Manufacturer: Bürkle Type: U60 Year of manufacture: 1989 Plate dimensions: 2,200 x 1,250 mm Opening width: 400 mm Pressing pressure: 60 tons Specific pressing pressure: 2.2 kg/cm² Heating: Electric Motor power: 0.75 kW Emergency stop device: Emergency stop cable Weight: 3,000 kg Hsdpeztnhmsfx Abtet Dimensions: 2,750 x 1,380 x 1,785 mm

Year of construction: 2025, condition: new, Magnetic table, 60 kg/square meter, 18x18 milling pattern for milling machines. Magnetic clamping plate 200x300x80mm, 60 kg/square meter, 18x18 milling pattern – 470 EUR Magnetic clamping plate 200x400x80mm, 60 kg/square meter, 18x18 milling pattern – 660 EUR Magnetic clamping plate 300x400x80mm, 60 kg/square meter, 18x18 milling pattern – 800 EUR Magnetic clamping plate 300x600x80mm, 60 kg/square meter, 18x18 milling pattern – 1100 EUR Magnetic clamping plate 400x800x80mm, 60 kg/square meter, 18x18 milling pattern – 1880 EUR Magnetic clamping plate 400x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2300 EUR Magnetic clamping plate 500x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2800 EUR Round magnetic clamping plates of this type with a diameter of 200-800 mm. Hsdpfx Ajzd Rlvjbtjt

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 2.500 kg Please contact Gebrauchtgeräte Center for more information Hsdpfszfn Epjx Abtst

Condition: used, empty load weight: 7,850 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 02/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2018, mileage: 5,26,001 km, ref: W0013571 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 2, Hjdpfx Ajzupnqjbtet * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-decking system, * Double-decking beams: 22 VIN: WSM000005210842 Tire size: 385/65 R22.5 Internal length: 13.33m Width: 2.6m Internal width: 2.46m Height: 4m Internal height: 2.65m

Condition: used, functionality: fully functional, Year of construction: 2013, fuel type: diesel, Still RX70 - 60 forklift - Diesel Year of manufacture: 2013 Overall height: 2.65 m Lifting height: 3.5 m Fork length: 2.4 m Hedpfjzt Ntdsx Abtot Side shift

Condition: excellent (used), Year of construction: 2014, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 530 HSC, overall weight: 10,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,000 h, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, 5-Axis Universal Machining Center DMG Deckel Maho DMU 60 EVO Year of manufacture: 2014 Control system: Heidenhain TNC 530 HSCi Operating hours: 16,000 h Spindle hours: approx. 3,000 h – spindle was replaced in 2025 Technical data: Spindle speed: 10 - 18,000 rpm Drive power: Spindle torque: Tool holder: HSK 63 Hjdpfx Abezut Inotjt Number of magazine positions: 60 Coolant through spindle – IKZ: 40 bar Travel distances: X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm A-axis: -10 / +110° B-axis: 0.001° Accessories: - Knoll coolant system 40 bar with paper band filter - Spindle oil cooler - Chip conveyor - 3D probe - Blum laser

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 1,500 kg, empty load weight: 353 kg, Fork Positioner Load center: 600 Condition: Ready for use and fully functional Hedpfx Aszt Drnsbtet Technical condition: very good Description: German SH Fork Positioner P1-ZVB 15 No.: R0813 Year of manufacture: 2014 Manufacturer: SH Anbaugeräte Type: P1-ZVB 15 Serial/part number: 2013-600385 Load capacity: 1,500 kg Load center: 600 mm Center of gravity: 270 mm Mounting dimension: 200 mm Weight: 353 kg Design: hydraulic fork positioner Condition: ready for use and fully functional Visual condition: very good Technical condition: very good This attachment is a hydraulic fork positioner. The fork spacing can be conveniently adjusted hydraulically directly from the driver's position and adapted to the respective load. Due to the width of the mounting, this version is more commonly used on reach trucks. The actual compatibility with the respective forklift should be checked before use, particularly with regard to mounting width, suspension, load capacity, and hydraulic connections. The attachment is in very good used condition, fully functional, and ready for operation. Fast and uncomplicated transport can be arranged upon request! This advertisement serves solely to identify the attachment. A detailed description of the condition and possible features is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. If you have not found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site. English SH Fork Positioner P1-ZVB 15 No.: R0813 Year of manufacture: 2014 Manufacturer: SH Anbaugeräte Type: P1-ZVB 15 Serial / part number: 2013-600385 Capacity: 1,500 kg Load center: 600 mm Center of gravity: 270 mm Lost load center: 200 mm Weight: 353 kg Design: hydraulic fork positioner Condition: ready for use and fully functional Visual condition: very good Technical condition: very good This attachment is a hydraulic fork positioner. The fork spacing can be conveniently adjusted hydraulically directly from the driver's position and adapted to the respective load. Due to the width of the mounting, this version is more commonly used on reach trucks. Compatibility with the respective forklift should be checked before use, particularly regarding mounting width, carriage connection, capacity and hydraulic connections. The attachment is in very good used condition, fully functional and ready for operation. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,577 kg, axle configuration: 3 axles, first registration: 02/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, wheelbase: 760 mm, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550 mm. Overall trailer width - 2600mm. Total height (unladen) - 4000 mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Lifting front axle. 1 insulated ventilation flap in the left hand rear door at the top. Tyres Information Hsdpszkqdrofx Abtjt Front left - 8 mm Front right - 8 mm Middle left - 12 mm Middle right - 12 mm Rear left - 6 mm Rear right - 6 mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Hodozk Aqkjpfx Abtot Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any guarantee or warranty.