Used Danfoss 080Z0191 for sale (185)

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 174 kW (236.57 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,660 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,700 mm, total height: 2,240 mm, warranty duration: 6 months, AIRCOOLED CHILLER KTK JWA FC 172 S/K/P PS 174 KW Cooling capacity: 174.0 kW / 49.47 tons (15/10 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Freecooling. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH184A4ALB (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM90B14S2/330 E3 Dimensions: 4.7x1.1x2.24 m Weight: 1660 kg Working hours: 4174/4174/4174/4174 h.h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. Ksdpfxjzvbi Ae Adlsdt LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 31,000 mm, total length: 9,150 mm, Maximale Tragkraft 6.000 kg Maximale Hubhöhe 30,80 m Maximale Reichweite 26,90 m Drehbereich 360° (endlos) Stützen Typ Scherenstützen mit einzelnem Teleskopausschub (Patent von Magni) Motor Modell Volvo TAD 582 VE Stufe V Volvo TAD 552 VE Kdsdpey Abh Iefx Adljt Stufe IIIA Nennleistung 160 kW (218 PS) bei 2.300 U/min 160 kW (218 PS) bei 2.200 U/min Max. Drehmoment 925 Nm bei 1.380 U/min 910 Nm bei 1.450 U/min Hubraum 5.130 cm3 Zylinderzahl 4 in Reihe Bauart Dieselmotor mit Direkteinspritzung und Turboaufladung Kühlsystem Wassergekühlter Ladeluftkühler Fahrantrieb Typ Hydraulisch Max. Druck 480 bar Getriebe Dropbox 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt Achsen und Bremsen Typ Achsen mit Planeten-Endantrieben Vorderachse Pendel-Lenkachse mit automatischem Niveauausgleich +/-8 Grad Hinterachse Pendel-Lenkachse mit hydraulischer Sperre Anzahl der Lenkräder Allradlenkung Lenkungsarten Vorderrad-/Allrad-/Hundeganglenkung Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt Feststellbremse Negativbremse, hydraulisch betätigt Bereifung 445/65 R22.5 Leistungen Max. Fahrgeschwindigkeit 40 km/h Max. Zugkraft am Lasthaken 89 kN Maximale Anhängelast am Abschlepphaken 5.000 kg Steigfähigkeit 41 % Wenderadius (mit Gabelzinken) 6.730 mm Gewichte Leergewicht* 22.700 kg Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt)* 10.500 kg Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt)* 12.200 kg Füllmengen Dieselkraftstoff 270 l 270 l AdBlue 40 l / Hydrauliköl 160 l 160 l Motoröl 16 l 16 l Kühlmittel 40 l 40 l Arbeitshydraulik Anlagentyp Load-Sensing Betriebspumpe Verstellpumpe Max. Hydraulikfördermenge 170 l/min Max. Traglast Auslegerkopf 75 l/min Max. Betriebsdruck 350 bar Verteiler für Ausleger- und Oberwagenbewegungen Elektromagnetisches Proportionalventil, SIL 2 Bewegungssteuerung Zwei 2-Achsen-Joysticks von Danfoss mit Totmanneinrichtung

Year of construction: 2026, condition: new, functionality: fully functional, ECS-EC-1000-12-VF EDDY CURRENT SEPARATOR Magnetism: 12-POLE MAGNETISM D500X1280MM ECCENTRIC DRUM NEODYMIUM MAGNETISM MAGNETIC FIELD INTENSITY OF 2950 GAUSS ON THE SURFACE OF THE ECCENTRIC DRUM MAGNETIC INTENSITY OF 2215 GAUSS OVER THE BELT Conveyor: 1000MM EFFECTIVE BELT WIDTH AGM3 EL 132 M2 B5 5.5KW 3000RPM ELECTRIC MOTOR (GAMAK) 4MM PVC BELT 40MM WAVE BELT LINING 5MM RUBBER LINING ANTI-SLIP BELT APPLICATION Panel: 3-PHASE 380V 50HZ POWER SUPPLY PANASONIC PLC CONTROL 7'' TOUCH SCREEN Kodpfx Adjzmntvsljdt MAGNETIC DRUM, BELT SPEED ADJUSTABLE WITH DANFOSS DRIVER TOTAL POWER 9KW

Condition: new, Year of construction: 2025, machine/vehicle number: MOT01-300, coil inner diameter: 250 mm, coil outer diameter: 1,450 mm, coil weight: 1,000 kg, coil width: 300 mm, product width (max.): 300 mm, overall weight: 300 kg, load capacity: 1,000 kg, spreading range: 250 mm, Automatic coiler or decoiler Remote control console - wireless Automatic and manual working mode Speed fine tuning potentiometer Danfoss inverter Synchronized easily with punching line Ideal for stamping automatic lines Coiler motorized Central expansion Run both directions, forward and reverse Loop sensors control Speed from 0.1 RPM to 28 rpm Motor with gear reducers Capacity max. load 1 ton Strip width up to 300 mm Kjdpfsb H R Ayox Adlodt Inner diameter min 250 mm max. 520 mm Outer diameter max. 1450 mm Power 0.75 KW Dimension 1.200 mm x 1.200 mm height 1.600 mm Weight cca. 300 kg with CE certificate On stock also high speed presses Schaal, Mabu and Bruderer presses as well bas band saw blade welders

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Kjdszudabjpfx Adljdt Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver seat - DAB radio - Differential lock - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air horn - Particle filter - PTO - Radio/Multimedia system - Rotating beacon - Rear view camera - Disc brakes - Sunroof - Sleeper cabin - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield Internal number for customer inquiries: Reference vehicle -> 3-150 MAN TGX 33.520 6x4 BLS with FASSI F485RA.2.28 xe-dynamic loading crane. Loading crane and superstructure: Kdodpfx Adeylxrzelet F 485RA.2.28 xe-dynamic Endless slewing range All hydraulic cylinders are double-acting Double-knee linkage system with PROLINK FASSI stability control FSC including LMB II Radio remote control, Fassi V7S Radio maxi-6 linear outriggers and color display FL system (Full Lift) switchable quick-gear valve for the outriggers Max. outreach 20.95 m with 1,325 kg lifting capacity (optional extendable to 24.95 m) Electronic overload protection with FX900 Danfoss D850 control valve Work lights Control system for additional function »Winch / xe-dynamic PAVIC semi-trailer crane superstructure in compact design Ball joint bearing on the superstructure to allow separate use of a ballast box (ballast box 3600 x 2480 x 800 mm, approx. €14,500 net) Vehicle: MAN TGX 33.520 6x4 BL SZM Technically permissible total weight 73,000 kg Engine D2676LF78 - 520 hp EURO 6e - 2650 Nm C -R OBD-D MAN TipMatic 12.28 OD, with Retarder 35 Driving program MAN TipMatic Performance, up to 70,000 kg Extension of driving program MAN TipMatic, 70,000 kg to 90,000 kg, heavy transport Driving program MAN TipMatic Offroad, up to 70,000 kg Rear axle Hypoid HYD-1370/HY-1350 Differential lock in rear axles Fuel tank 370l right and 60l AdBlue Drive 6x4 Wheelbase 3300+1350 mm Suspension Leaf/Air ECAS air suspension system Rear frame overhang 750 mm Trailer coupling ROCKINGER 400G150A Trailer coupling for pulling a semi-trailer (factory conversion) Fifth wheel coupling JOST JSK 37 C, mounting height 185 mm with integrated lubrication Fifth wheel distance 1125 mm Fifth wheel plate 40 mm, manufacturer JOST (fifth wheel load up to 36t) Cab GM: the spacious one (wide, long, medium height) Glass sunroof, electric Control panel MAN EasyControl, 2 functions, can be operated from the outside when the door is open Driver comfort seat, air-suspended with lumbar support, shoulder adjustment and heating 2 sleeping berths Cool box under sleeping berth, fully retractable Storage compartment on the rear wall of the cab with swan-neck light and control module MAN Media System Navigation Professional 12.3 inches Infotainment control MAN SmartSelect with touchpad and direct selection buttons Smartphone integration Lane departure warning system LDW Digital axle load display (ALM) in the cab for air-suspended axles and more. Financing / leasing, as well as...

Condition: used, mileage: 7,30,552 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beams - Speed limiter - Catalytic converter - Automatic climate control Kjdpoylnpcsfx Adlodt - Refrigerator - Air suspension - Air-suspended seats - PTO (Power Take-Off) - Radio/Multimedia system - Rotating beacon - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Auxiliary heater - Automatic heating system - Toolbox - Windshield Internal number for customer inquiries 4-264 MAN TGX 26.500 6x4 short-log complete truck with TajfunLiv 150Z 9.6 loading crane. Vehicle description: Truck: MAN TGX 26.500 6X4 BL wheelbase 4500mm Engine D2676LF51 - 500 hp / 368 kW EURO6 SCR - 2500 Nm C-R OBD-C Gearbox software for off-road use (TipMatic OFFROAD) Gearbox ZF 12 TX 2821 OD MAN TipMatic with ZF-Intarder Auxiliary drive 2 NA NTX/10 without flange f=0.96 above and NTX/10 with flange f=1.31 below Parking brake with pneumatic activation of front axle brakes Cab with medium-high high roof 'XLX' 2440mm wide, 2280mm long Equipment packages Comfort Package 1 driver MAN Media Package Navigation Driver's comfort seat with air suspension, lumbar support, shoulder adjustment and heating Auxiliary air heater EBERSPÄCHER D4S Air conditioning system AC R134A CFC-free with automatic temperature control 1 sleeping berth with storage space (aluminum frame) Mattress for lower sleeping berth Radio MAN Media Truck Advanced 12V with 7' display and navigation preparation Navigation SD card EUROPE COMPLETE Hands-free system "Comfort" for 2 mobile phones (MFL and Bluetooth® capable) Body: OptiPa platform body 4 ExTe D5 platforms with 8 ExTe aluminum telescopic bolsters Stable steel front wall Access option on the passenger side Access ladder on the driver's side Toolbox on the passenger side Two snow chain holders Tire cover, new Crane: TajfunLIV 150Z 9.6 TAJFUN LIV fully hydraulic wood loading crane Classification according to EN12999 Declaration of conformity CE version Color: black Reach 9.60 m (double extension), lifting moment 141 kNm Internal hoses in telescopic extensions Slewing mechanism Slewing range 425° Control block PARKER H170CF Telescopic support Support legs can be pivoted up to 45° Support leg plates fixed Support leg control with electro-hydraulic valve Danfoss PVG 32 Dead point above the cab Two-circuit system Knee lever on the lifting cylinder Lifting cylinder protection Operating hour counter Headlight on the knuckle arm Spare parts catalog and operating manual in German Endless rotator 10 t Seat heating LED work lights Tilt switch Start / Stop function - Linear lever control (4+2) - Grapple GO53x This is a non-binding offer. Subject to prior sale, errors and changes. General information Cab: Long-distance transport Technical information Number of cylinders: 6 Engine displacement: 12,419 cc GVW: 26,000 kg Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: Leaf suspension Rear axle 1: Tire size: 315/80-22.5; Differential lock;...

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 aluminum flatbed with loading crane, immediately available. The vehicle is available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500 kg, payload of the ready-to-use vehicle with loading crane and aluminum flatbed approx. 600 kg - Manual transmission - Limited-slip differential - Batteries 2 x 100 Ah - Tow hitch, ball hitch 3500 kg with electrical kit (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Reversing warning system - Auxiliary drive with increased speed - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum flatbed: - Internal dimensions: 2720 mm x 1820 mm x 400 mm - Floor panel 18 mm - Floor frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Toolbox Kjdpfx Aszv Nrxsdledt - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995 kg at 3.2 m = 815 kg, at 4.40 m = 575 kg, at 5.60 m = 400 kg, at 6.80 m = 300 kg, at 8.05 m = 220 kg - Design according to CE directive (EN 12999) - Slewing range 370° (mechanical slewing range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard-chromed - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 liters) with filter, mounted on the crane base - Support legs, extendable on both sides, special support, support width 3.10 m - Hydraulic support legs, swiveling 30° and 180° - CE, incl. M.O.L. - Load hook and fastening lugs - Onboard voltage 12 V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions including high-pressure filter - Special support, support width 3.10 m, 1 unit - Extra charge for shortened support legs, by 80 mm - Mechanical arm extension, lifting height 1.30 m (7.0k) - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights located near the control block, factory-installed - LED work lights on the knuckle arm, factory-installed - LED for 2 support legs - Optional: Rear view camera with Carplay, shovel holder, 90° cable, ladder carrier/transport frame for the front or rear panel, additional storage boxes available. Errors and prior sale are subject to change. ... Air conditioning, climate control, VAT can be shown separately, ABS, electronic immobilizer, central locking with remote control, tow hitch, power steering, spare wheel, cab: short cab, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/city/highway), particulate filter, rentable, particulate matter sticker: 4 - Green.

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 380.9 kW (517.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,147 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,350 mm, total height: 2,450 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE CGAM140 380.9 KW Cooling capacity: 380.9 kW / 108.3 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHN315 (scroll) + 2 pcs. Danfoss CSHN250 (scroll) Type of refrigerant: R410A Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Wilo, buffer tank 762 l, expansion vessel 60 l. Dimensions: 5.35x2.3x2.45 m Weight: 4147 kg Working hours: 7343/3545/6326/7990/5866/6489 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Ksdezqzrgopfx Adljdt Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Kjdpfsu A T Hzsx Adlodt Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: excellent (used), em: D-8061-Flowmeter-Siemens/Danfoss MAG1100 F, Digital MAGFLO Flow meter Type MAG 6000 Transmitter with touch display. Secondhand size DN15 (1/2") Max. flow: 20m3/h Max. Press: 20 Bar/290 psi Max. Temperature: 130 c/166 f Min. Temperature: -30 c/-22 f Year 2012 Input 60 V max 0.125 A For more informations please contact us! Kodpfx Adjirfbwelsdt From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: reconditioned (used), We offer a CARNITECH screw conveyor with feeding hopper – an industrial set designed for conveying, feeding and dosing raw material in food processing plants. The system is suitable for production lines where stable, controlled and efficient product feeding to further processing machines is required. The set consists of a feeding hopper and a screw conveyor, often referred to as an inclined screw feeder. This solution allows the product to be conveniently loaded into the hopper and then smoothly transported to the next stage of the process, for example to a mixer, grinder, bowl cutter, separator, forming machine, packaging machine or other production equipment. The CARNITECH screw conveyor and hopper are equipped with motors of 4 kW and 2.2 kW, ensuring efficient operation even in demanding production conditions. The control system is equipped with frequency inverters from renowned brands Fuji and Danfoss, allowing smooth speed adjustment and adaptation of the machine operation to the type of raw material and the capacity of the entire line. A major advantage of the system is the possibility of smooth speed regulation and reverse operation, meaning the direction of rotation can be changed. This gives the operator better control over the feeding process, helps reduce the risk of blockages and allows the machine to be adjusted to current production needs. The safety system is designed using components from the well-known and respected company Pilz, which increases operator safety during daily operation. The system can be used as a standalone conveying unit or as part of a larger technological line in meat, poultry, fish processing plants and convenience food production. Technical data: Manufacturer: CARNITECH Type: screw conveyor with feeding hopper Set components: screw conveyor / inclined screw feeder + feeding hopper Motor power: 4 kW and 2.2 kW Control: system with frequency inverters Frequency inverters: Fuji and Danfoss Speed regulation: smooth Reverse operation: yes Safety system: Pilz components Application: conveying, feeding and dosing of raw material Main advantages: stable feeding of raw material to the production line set consisting of a feeding hopper and screw conveyor Ksdpfx Adjzi U H Uelodt 4 kW and 2.2 kW motors smooth speed adjustment possibility of reverse operation frequency inverters from Fuji and Danfoss safety system based on Pilz components efficient operation in demanding production conditions possibility of integration with other food processing machines solid industrial construction solution for automation of raw material transport

Condition: new, loading space length: 5,300 mm, loading space width: 2,300 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane ELLERMANN roll-off container according to DIN 30722-1 Standard container Type S 77 with crane platform Internal dimensions: approx. 6.5/5.3 x 2.3 x 2.0 meters (all dimensions are approximate) Usable volume: approx. 24 m³ Paint finish: RAL 7016 (anthracite gray) ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outer rollers and subframe made of INP 180 Outer rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support is reinforced with 10 mm knee plates ? Crane platform 20 mm thick on the end face, length approx. 1,200 mm Reinforcement on the end wall support and subframe on the inside Additional stiffening on the end support ? Crane cutout on the end wall (according to Fassi drawings) ? Bottom pan made of 5 mm St 37.2 (S235JR) ? Side walls made of 3 mm St 37.2 (S235JR) ? Rounded bottom pan, raised approx. 250 mm towards the side wall ? End profile made of sturdy round tube Ø 90 mm ? Spant spacing 750 mm Spant profile U 80 x 50 mm ? On both sides, 1 x transverse spant in the middle, fully welded ? Double-wing door at the rear with Dutch door latch and lateral safety central locking system according to UVV Safety central locking system extended to 2,000 mm Door latch with container door opening aid and hockey lock Additional opening handle on the left door leaf ? All-around tarpaulin and net hooks ? Container primed once on the inside, primed twice on the outside and painted twice in a single color on the outside ? UVV stickers with safety instructions ? Container inspected and approved according to DGUV Rule 214-017 (formerly BGR 186) ? Container inspection book (digitized) for documenting the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection when the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° all hydraulic cylinders are double-acting piston rods are hard-chrome plated double knee joint system with PROLINK (over-extension of the knuckle arm up to 15°) electronic overload shut-off device with FX500 6 functions RCH or RCS radio remote control (linear levers) with display and XP system emergency shut-off and optical alarm (90% and 100%) including digital slewing limitation, adjustable FASSI stability control FSC incl. LMB II pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable on one side separate hydraulic tank (90 l) with filter, mounted on the crane base extendable on both sides, support width 4.60 m, hydraulic support ? CE, incl. M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black load hook and attachment brackets (short / 500 mm) Transport position: folded across the direction of travel Dead point above the support beam Note: Observe on-board voltage / 12V or 24V, standard 24V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work spotlight on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose lines / eactive Slewing valve, only for cranes with rack and pinion Quick-action valve for the outriggers Kdodpfx Aezq Iu Uedlet Additional cos

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Kodjzq Iu Iepfx Adlsdt Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit Kedpfxjg N Tuzj Adledt -Roller conveyor: with hydraulic drive -Roll width: 500 mm -Diameter roller: 50 mm -Center distance: 70 mm -Hydraulic motor: Danfoss type OMM 12.5 -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

Condition: good (used), Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A -Pump: Lowara type CEA70/5 0.55 kW -Total dimensions: 740/710/H930 mm Kjdpfx Ajlpi Tqedledt -Weight: 196 kg

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loading Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully enclosed V2A stainless steel Commercial tonnage: 35 t Main wheelbase: 2,980 mm Wheelbase between front axles: 1,795 mm Wheelbase between rear axle and trailing axle: 1,350 mm Exhaust silencer, side-mounted, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side 1-cylinder air compressor, 360 cc, with economy system Pneumatically regulated air processing Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency brake assist Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard light activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 HP) output, 2,650 Nm torque, Euro 6e Heated fuel filter for fuel up to purity class 25 Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve) Kedpfxewllmaj Adledt F1150RA.2.28 L616 winch + 2-person basket (available as an option for an extra charge) Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double linkage system with PROLINK (overbending articulated arm up to 12°) Electronic overload switch-off with FX900 FASSI stability control FSC including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load-holding valves XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base Hydraulic outriggers, hydraulically extendable on both sides, support width 8.84m Outriggers operable via radio control with proportional control block IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hooks and mounting shackles (short / 500mm) Transport position: folded transversely to the direction of travel Attention: Observe vehicle voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II IE742 connection box Low-profile subframe 180° hydraulically tiltable outriggers / both sides Control system for auxiliary function "winch / xhe-dynamic" Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on articulated arm LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support beams) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, engine speed +/-, 6x ON/OFF functions, 10m cable and various operating speed settings, including spare battery, charger, neck and waist belt.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Kedjzqhxmepfx Adlodt Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Ksdpfx Adowmh Hrslsdt Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Platform truck and chassis, suitable for crane installation Chassis Color: Pure White RAL 9010 Cab Color: Graphite Black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 hp) Torque: 2,400 Nm Emission Standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-disc clutch (430 mm) Driving Modes: Efficiency, Manoeuvre, Idle Speed Driving, Rock-Free Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle spacing (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame rail thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic leveling control Spring load capacity: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (adjustable) Disc brakes on all axles Electronic parking brake Tyres & Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte finish Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, seat heating, armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage compartments Interior styling: Moon Grey Sun blinds, tilting roof Various storage solutions USB sockets LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Technical trailer load: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency brake assist Lane departure warning Digital tachograph Advanced navigation system (7-inch) MAN SmartSelect Body Interfaces Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Kdedpexwra Isfx Adljt Special Features HydroDrive: hydraulic front-axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and government applications as well as flexible body solutions ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Colour: RAL 3020 traffic red, cylinders black Slewing Range Infinitely rotatable Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Linkage System Double linkage system with PROLINK Articulated arm can be overextended up to 15° Overload Protection Electronic overload shutdown FX500 FSC stability control LMB II Emergency stop and visual alarm Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency operation Stabilizers Hydraulically extendable on both sides Support width: 7.79 m Speed Control Dynamic Control – load-dependent Additional Articulated Boom / Jib Type: L214 4x hydraulically extendable up to 10.30 m

Condition: new, mileage: 400 km, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive ? Vehicle type: Flatbed truck and chassis, suitable for crane mounting ? Cab color: black with day registration 2025 Engine ? Type: MAN D2676 LF85 ? Power: 352 kW (480 hp) ? Torque: 2,400 Nm ? Emission class: Euro 6d Transmission ? MAN TipMatic 12-speed automatic transmission ? Reinforced single-plate clutch (430 mm) ? Driving programs: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis ? Wheelbase: 3,600 mm ? Overhang: 1,950 mm ? Main wheel spacing (between rear and tag axle): 1,350 mm ? Frame height above cab: up to 4,000 mm ? Frame longitudinal member thickness: 8 mm ? Frame end: straight Axles ? Front axle: 9,200 kg, steered, HydroDrive without through drive ? Rear axle: 13,000 kg, HY axle, not steered, without through drive ? Tag axle: 9,000 kg, steered, liftable, not driven ? Axle ratio: i = 3.70 Air suspension ? Electronically controlled air suspension (ECAS) on tag axle ? Automatic level adjustment ? Spring capacities: VA 9,500 kg / HA 13,000 kg / NA 8,000 kg Brakes ? Electronic brake system (EBS) ? ABS, ASR ? High-performance engine brake MAN EVBec (stepped) ? Disc brakes on all axles ? Electronic parking brake Tires and rims ? Front axle: 385/55 R22.5, steel rims 11.75x22.5 ? Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 ? Tag axle: Michelin 315/70 R22.5, Alcoa matte Kedsy Sqqqspfx Adledt Cab ? Type: FN, flexible, narrow, normal height ? Comfort seats: air-sprung, seat heating, armrest ? Multifunction steering wheel ? Central locking ? Climatronic air conditioning system ? Lower comfort bunk ? Storage space in seat console and storage compartments ? Interior styling: Moon Grey ? Sun visors, tilting roof ? Various storage compartments ? USB sockets ? LED lighting Permissible loads ? Technically permissible gross weight: 26,000 kg ? Axle loads: VA 9,000 kg / HA 11,500 kg / NA 7,500 kg ? Technically permissible trailer load: max. 30,000 kg Tanks ? Fuel tank: 400 l ? AdBlue tank: 60 l Driver assistance systems ? ESP, ASR, cruise control ? Emergency brake assist ? Lane departure warning ? Digital tachograph ? Advanced navigation system (7 inches) ? MAN SmartSelect Interface for superstructures ? Pre-installation for crane mounting ? Trailer coupling: RINGFEDER Type 4040G150A ? Various electrical and pneumatic connections Special features ? HydroDrive: Hydraulic front-wheel drive for more traction ? Comfort features for the driver ? Factory interfaces and pre-installations for municipal, construction, and emergency services as well as flexible superstructures - FASSI loading crane F545RA.2 xe-dynamic base unit ? Type: F545RA.2 xe-dynamic ? CE directive EN 12999 HD5S2 compliant ? Color: RAL 3020 traffic red, cylinders black Slewing range ? Continuously rotatable Hydraulics ? Double-acting hydraulic cylinders ? Piston rods hard chrome-plated Joint system ? Double knee lever system with PROLINK ? Knuckle arm can be extended by up to 15° Overload protection ? Electronic overload cut-out FX500 ? FSC stability control ? LMB II ? Emergency shutdown and optical alarm Valves & filters ? Pressure relief and holding valves ? High-pressure filter ? Separate hydraulic tank 180 l with filter and oil cooler on the base Control ? FASSI radio remote control RCH/RCS ? Display of pressure values ? Danfoss D850 control block with 4 control valves ? Emergency operation Outriggers ? Hydraulically extendable on both sides ? Outrigger width: 7.79 m Speed control ? Dynamic Control - load-depen

Condition: good (used), Drawbar head, control unit, steering system, steering unit, steering control unit, steering orbitrol Kodpfxszg U Hco Adlodt -Manufacturer: Toyota, Steering control unit with steering system for forklift trucks -Steering control unit: Danfoss OSPC 100 ON 150N1066 steering orbitrol -Dimensions: see photos -Price/Fee: complete -Transport dimensions: 620/370/H355 mm -Weight: 16.5 kg

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Kdjdpfx Adszp Sz Ajlet Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: new, mileage: 21 km, power: 88 kW (119.65 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, - Isuzu M21 T E MT Single (track width 1.4m!) Steinmetz aluminum flatbed with loading crane, the vehicle is available for rent with an option to purchase. Chassis: Isuzu 21 T E MT Single - Gross vehicle weight 3500kg, payload of the finished vehicle with loading crane and aluminum flatbed approx. 650kg - 6-speed manual transmission Kodpfx Asyt Rttjdljdt - Trailer coupling, ball hitch 3500kg with wiring harness (factory installed) - BI-LED lighting - Electric parking brake - Air conditioning - Carplay radio - Rearview mirror with rearview camera - Multifunction steering wheel - Auxiliary drive, factory installed - Tires 205/75/R16C - Safety Pack 1: - ABS: Anti-lock braking system with BAS - ASR: Anti-slip control on the rear axle - EVSC: Electronic stability control - LDWS: Lane departure warning system - MOIS: Moving object detection - DWS: Distance warning system - MAM: Emergency braking in front of an obstacle - FVSN: Front field detection - DDAW: Driver drowsiness detection system - TSR: Traffic sign recognition - TPMS: Tire pressure monitoring system - AEBS: Autonomous emergency braking system - RM: Rearview camera with monitor - AEBS: Autonomous emergency braking system for pedestrians and cyclists Aluminum flatbed: - Inside: 2720mm x W 1820mm x H400mm - Bottom plate 18mm - Bottom frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Tool box - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of origin: Italy) - Lifting capacity according to manufacturer: Max. 995kg at 3.2m=815kg, at 4.40m=575kg, at 5.60m=400kg, at 6.80m=300kg, at 8.05m=220kg - Design according to CE directive (EN 12999) - Slewing range 370° (mech. slewing range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard chrome plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs extendable on both sides, special support legs, support width 3.10m - Hydraulic support legs pivotable 30° and 180°, CE, incl. M.O.L. (Maximum Operating Load) - Load hook and mounting brackets - Onboard voltage 12V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions incl. high-pressure filter - Special support legs, support width 3.10m, 1 piece - Additional cost for shortened support legs by 80mm - Mechanical arm extension N » reach 1.30 m (7.0k - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block, factory installed - LED work lights on the swivel arm, factory installed - LED for 2 support legs - Optional: Shovel holder, 90° rope, ladder carrier/transport frame on the front or rear panel, additional storage boxes available Errors and prior sale are reserved. ... Air conditioning, climate control, VAT can be shown, ABS, electric windows, central locking with remote control, trailer coupling, power steering, spare wheel, cab: day cab, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, particulate matter badge: 4 - Green.

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. Ksdpek Sgwasfx Adljdt perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581