Used Divisio 5100 for sale (261)

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Bdodpox Sq Uvefx Amned Through-spindle coolant (IKZ)

Condition: used, mileage: 2,63,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Bdedpfx Amjxal A Uensd Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Bdsdevdu N Ajpfx Amned

Condition: used, functionality: fully functional, machine/vehicle number: 995340, Year of construction: 2018, operating hours: 2,255 h, load capacity: 3,500 kg, lifting height: 11,050 mm, fuel type: diesel, construction height: 2,420 mm, power: 75 kW (101.97 HP), drive type: Diesel, Rigid Telescopic Handler Chassis number: 995340 Load centre: 500 Speed class: 20 Bdjdpfsya Rggex Amnod Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: pneumatic Front tyre size: 440/80-24 Front tyre condition: 60-80% Rear tyre type: pneumatic Rear tyre size: 400/80-24 Rear tyre condition: 60-80% Description: Rotating beacon, reverse alarm, rear license plate lighting. Bucket. 3rd hydraulic valve, rear work light, front work light, heater, STVZO, full cab, operator's manual, inspection booklet, declaration of conformity.

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, Equipment: cooling unit, New GS-3015 Series economic fiber laser cutting machine is a high performance thin sheet metal laser cutting machine with 1000w/1500w/2000w/3000w fiber laser optional. It is suitable for cutting all thin metals, such as stainless steel, carbon steel, galvanized steel, aluminum, brass, etc. After redesign, New GS-3015 Series can provide larger effective strokes up to 3100*1600mm. Any thin metal sheet cutting idea or project? It will be your best solution for its high speed, high precision, high quality, stable performance, long lifetime, and low cost. Bodpfsv Hnk Eex Amnedd

Condition: new, Year of construction: 2025, Capping Module to press caps onto containers. - Stainless Steel version (SS304); max. speed of the machine in neutral: 120 cycles/minute; cap diameter: 15-100mm; container/bottle diameter: 35-140mm; container/bottle height: 50-300mm; 220V, 2.7kW; machine dimensions: L2800xW900xH1880mm; weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bdsdpfx Aov Nk T Uemned

Condition: like new (used), Year of construction: 2018, functionality: unexamined, machine/vehicle number: 1809108209, input frequency: 50 Hz, 2x Kracht lubrication oil unit for sale Bdodpfxowzu T Io Amned

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, stroke length: 265 mm, controller manufacturer: Cybelec, bending force (max.): 250 t, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, emergency stop, safety light barrier, Used Bystronic 250ton x 5metre multi axis hydraulic downstroke cnc pressbrake for sale PR250 x 5100 Make: Bystronic Model: PR 250 Pressure Reference Year / new: 2005 Total axis:6 – 4axis back gauge X R Z1 Z2 Bodpfx Aex R Ut Homnsdd Free standing no pit required Capacity / bed size / tonnage: 5metre x 5100mm x 250ton Cnc control: Cybelec Delivery to your factory and installation complete with tuition with your operators can be arranged (mainland UK only) shipping worldwide can be arranged

Condition: good (used), Year of construction: 2004, machine/vehicle number: 300 584, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 400 V, input current: 85 A, type of input current: three-phase, overall weight: 8,000 kg, year of last overhaul: 2016, We are selling a complete shredding line including: - Artech RS75 shredder - Pusher / compactor - Electrical control cabinet Bsdpfx Asxrtwwemnjdd - Overband magnet - Sampler The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: new, Year of construction: 2025, Cutting length: 5100 mm Cutting height: 2200 mm Bdsdpfx Ashpma Eemned Cutting depth: 60 mm Scoring saw: yes Feed: manual Horizontal cut display: digital Vertical cut display: digital Saw blade diameter: 300 mm Adjustable material support: yes Saw blade speed: approx. 4000 rpm Motor power: 3 kW Machine length: 6300 mm Machine depth: 1800 mm Machine height: 3100 mm Weight: 850 kg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. Bdedpfezh Eh Tsx Amnjd • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, mileage: 2,39,950 km, power: 132 kW (179.47 HP), first registration: 03/2021, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,550 mm, total width: 2,550 mm, total height: 3,550 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Special equipment: Storage compartment on the dashboard with USB port, dashboard comfort package, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, body manufacturer interface, automatic climate control, fuel tank: 117 liters, transverse support at the end of the frame, front mud flaps, preparation for telematics system (telematics box) Additional equipment: Bdjdpfszicduox Amnod Driver-side airbag, trailer stability program (TSM), trailer socket preparation, traction control system (ASR), version: C-series, exterior mirrors electrically adjustable and heated, long exterior mirrors, for vehicle width 2350 mm, brake assistant, electronic brake force distribution, driver assistance system: hill start assist (AAS), driver assistance system: emergency brake assist AEBS + City Brake, driver assistance system: proactive lane monitoring assistant (LDWS), digital tachograph, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, automatic transmission - Hi-Matic (8-speed), grab handle A-pillar, urea tank (AdBlue): 20 liters, body/superstructure: standard platform body, engine 3.0 liters - 132 kW diesel, wheelbase 5100 mm, spare wheel with road tires, low emission according to Euro 6d emission standard, seats in the cab: double passenger seat, seats in the cab: driver's comfort seat (hydraulic), maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle / rear axle Tail lift Dhollandia 1000 KG The vehicle is in TOP condition! Financing possible through Santander Bank.

Condition: used, mileage: 1,79,980 km, power: 132 kW (179.47 HP), first registration: 12/2020, fuel type: diesel, overall weight: 7,200 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 2,510 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Special equipment: - Overhead storage in the cab, storage compartment on the dashboard with USB port, front axle load 2.7 t, audio system: digital audio system (DAB) with USB and Bluetooth hands-free, bodybuilder interface, rear differential lock, automatic climate control, height and reach adjustable steering column (steering wheel), light and rain sensor, cargo area lighting switch, rear cross member at frame end, front mud flaps, cab seats: luxury driver's seat, Traction Plus (electronic traction control) with hill descent assist, auxiliary heater (hot water) with timer Additional equipment: - Driver's airbag, trailer stability program (TSM), trailer socket pre-installation, traction control system (ASR), model version: C-series, electrically adjustable and heated exterior mirrors, extended exterior mirrors for vehicle width 2350 mm, brake assist, electronic brake force distribution, driver assistance system: hill start assist (AAS), emergency braking assistant AEBS + City Brake, proactive lane departure warning system (LDWS), digital tachograph, front axle suspension: torsion bar, tinted windshield and side windows, alternator 210 A, automatic transmission - Hi-Matic (8-speed), A-pillar grab handle, urea tank (AdBlue): 20 liters, body/chassis: standard flatbed, fuel tank: 90 liters, engine 3.0 l - 132 kW diesel, wheelbase 5100 mm, spare wheel with road tires, low emissions compliant with Euro 6d standard, cab seats: twin passenger seat, maintenance indicator, gross vehicle weight 7.00 t, twin rear wheels on second axle/rear axle Tail lift Palfinger, 1000 kg Cargo area dimensions (internal): L 6.20 m x W 2.46 m x H 2.51 m Payload: 2,600 kg Service book, next inspection at 198,000 km Bjdpfx Aezicdhsmnedd New TÜV and emissions test available at extra cost Financing available

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) Bdodpfezhwx Dex Amnod • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Cutting length: 4300 mm - Vertical cutting height: 2150 mm, horizontal cutting height: 2100 mm - Maximum cutting depth: 60 mm Bjdpfx Amjxvnpcenedd - Saw blade diameter: 250 mm; bore: 30 mm - Motor: 4 kW - Speed: 5100 rpm - Material support with rollers - Fixed support elements for secure positioning of workpieces - Middle support: stable support elements at working height, individually manually foldable - Measurement reading for: - horizontal saw cuts via scale - horizontal saw cuts via strip stop from 50–500 mm - vertical saw cuts via stop from 0–1300 mm - Air connection for pneumatically retractable slatted frame (required air pressure: 6 bar) - Scoring system: by double cut of the main saw blade; the plunge depth of the saw blade is limited simply by adjusting a stop, so the saw blade scores the workpiece in the direction of feed Availability: short term Location: Röllbach

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Bedpfszc N Ihjx Amnjdd Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 1981, faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm Bdodju Sbdgopfx Amnjd max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH Bdsdpfx Amey Dvlksnjd OPTION (PRICE ON REQUEST): hardened rolls

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 315 mm 315x32x63 mm 45 / 90 U/Min rund 105 mm / quadratisch rund 90 mm / quadratisch 4.7 kW 600 mm 1000 mm 1400 mm Bdjdpfxsynngaj Amnsd 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included

Condition: used, mileage: 10,57,000 km, power: 265 kW (360.30 HP), first registration: 05/2009, fuel type: diesel, empty load weight: 11,800 kg, maximum load weight: 14,125 kg, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, compressed air brake, differential lock, MAN TGS 26.360 with Frigoblock deep-freeze unit | Automatic, EURO5, retarder | Tail lift 2000kg | 3rd axle liftable, digital tachograph | Low coupling | Wheelbase 5100/1350 mm | Air conditioning, seat heating, electric windows | Total box length: 8.30m | Height 2.50m | Width 2.60m | Subject to errors, input mistakes, and prior sale. Bdjdpfx Aoypm E Rsmnsd

Condition: used, mileage: 1,40,430 km, power: 320 kW (435.08 HP), first registration: 08/2009, fuel type: diesel, empty load weight: 14,360 kg, maximum load weight: 11,640 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 5,100 mm, next inspection (TÜV): 12/2026, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Mercedes PowerShift II transmission, private ownership, 1x comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO, automatic transmission, differential lock, fog lights, work lights, beacon, toolbox, leaf suspension, trailer hitch with ball coupling, trailer hitch air+light, low-noise G1, lashing eyes, underrun protection, side aluminum underrun protection, swinging tailgates, roof hatch, rear-mounted crane, emergency stop, foldable, 2-point hydraulic support, radio remote control, 3x hydraulic extensions, green environmental sticker. Wheelbase: 5100 mm Body: dropside platform body with aluminum sideboards & rear-mounted Fassi F190A23 crane with radio remote control (remote control). Loading height approx. 1380 mm. 8t front axle, H7 13t rear axle, 233 crown wheel, performance-optimized Voith retarder, Telligent brake system with ABS and ASR, disc brakes front and rear, rear axle stabilizer, PSM, distribution cockpit, Mercedes PowerShift 2, pollen filter, on-board diagnostics 1.0, transmission oil cooler, PTO intermediate shaft MB 131-2c. Bedpfx Amjzibicjnedd Load chart: 2m-8325kg, 4.35m-3840kg, 6.2m-2630kg, 8.10m-1955kg, 10.10m-1550kg! ACCESSORY SPECIFICATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, mileage: 1,40,430 km, power: 320 kW (435.08 HP), first registration: 08/2009, fuel type: diesel, empty load weight: 9,000 kg, maximum load weight: 17,000 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 5,100 mm, next inspection (TÜV): 12/2026, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Mercedes PowerShift Transmission II, house registration, 1x comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control system (ASR), retarder, PTO (power take-off), automatic transmission, differential lock, fog lights, rotating beacon, storage compartment, leaf suspension, trailer hitch with ball head, trailer hitch air+light, low-noise G1, underride protection, side aluminium underrun protection, roof hatch, green environmental sticker. Wheelbase: 5100 mm, 8t front axle, rear axle H7 13t, crown wheel 233, performance-optimized Voith retarder, Telligent braking system with ABS and ASR, disc brakes on front and rear axle, rear axle stabilizer, PSM, distribution cockpit, Mercedes PowerShift 2, pollen filter, on-board diagnostics 1.0, transmission oil cooling, PTO intermediate shaft MB 131-2c. Accessory information without guarantee, subject to change, prior sale and errors excepted! Bsdjzibiiopfx Amnedd

Condition: new, max. workpiece length 3200/5100 mm profile spindle 1 Stück main drive 12 kW Control Beckhoff CNC Number of axles 5 St. Bdodpfx Amsd Rhd Ronod

Condition: new, max. workpiece length 3200,5100 mm profile spindle 1 Stück main drive 12 kW Control Beckhoff CNC Number of axles 5 St. Bdjdpfx Amod N Rt Tonjd Masterwood Project 385 CNC-Bearbeitungszentrum ----- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: ----- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) ; Y = 1500 mm; Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand lineares 5-fach Werkzeugmagazin für große WKZ-Durchmesser Konsolentisch mit 6 Traversen Werkstückanhebevorrichtung 6 Stk. spezielle Spanner für runde Fenster- und Türenelemente 24 Stk. Vakuummspanner für Platten und Innenausbau 1 Stk. Vakuumpumpe 100m3/h 1 Stk. Spänetransportband 1 Stk. Fernbedienung Konstruktions-Software Masterwork: 2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen Master 3D Stufe 2: für komplexere Bearbeitungen, optional auch erweiterbar für 5-Achs voll interpolierend Fracht und Montage innerhalb Deutschland Technik und Dienstleistungen gemäß beiliegender ausführliche Beschreibung ----- Gesamtpreis in dieser Ausführung: auf Anfrage! ----- Optionen mit Mehrpreisen: ----- Arbeitslänge 5.100 mm anstelle 3.200 mm inklusive Erhöhung Konsolenanzahl und Spannmittel Mehrpreis: 7.500,00 Euro zzgl. MwSt. Zusätzlicher Karussellwerkzeugwechsler mit 16 Plätzen und 102 mm Rasterabstand Mehrpreis: 6.500,00 Euro zzgl. MwSt. Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage! (technische Angaben laut Hersteller- ohne Gewähr!)

Condition: good (used), mileage: 1,96,677 km, power: 125 kW (169.95 HP), first registration: 07/2004, fuel type: diesel, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 4,190 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, number of seats: 3, total length: 8,040 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 5,930 mm, loading space width: 2,490 mm, loading space height: 2,370 mm, Year of construction: 2004, Equipment: ABS, cruise control, tail-lift, trailer coupling, = Additional Options and Accessories = - Tachograph (driver's control unit) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Fabric - Winch = Notes = Number of axles: 2, Configuration: 4x2, Payload: 2390 kg, Unladen weight: 5100 kg, Gross vehicle weight: 7490 kg, Total tank capacity: 125 liters, Tow hitch, Trailer load on center axle, braked: 7490 kg, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Winch, Winch pulling capacity: 1000 tons, Suspension type: Air suspension, Type of cab: Short cab, Cruise control, Tachograph (driver's control unit), Color: White, Type of lighting: Halogen lamp, Engine power: 125 kW (168 Hp), Fuel: Diesel, Euro: 3, Transmission type: Manual, Transmission type: ZF, Gears: 6, Clutch pedal, Power steering, ABS, Number of seats: 3, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Load capacity of the tail lift: 1000 kg, Tail lift manufacturer: MBB Palfinger, Tail lift material: Aluminum, Tail lift size: 185 x 252, MANUAL GEARBOX RACING TEAM CROSS TEAM 3-SEATS TAILLIFT, Spare wheel, Spare wheel tread: 11% = Further Information = Transmission Transmission: ZF, 6 gears, Manual transmission Axle Configuration Tire size: 215/75R17.5 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread left: 9 mm; Tire tread right: 10 mm Axle 2: Dual tires; Tire tread left inner: 13 mm; Tire tread left outer: 14 mm; Tire tread right inner: 12 mm; Tire tread right outer: 14 mm Weights Unladen weight: 5,100 kg Payload: 2,390 kg GVW: 7,490 kg Functional Tail lift: MBB Palfinger, Rear door, 1000 kg Height of the loading platform: 101 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: BS-LX-37 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and model years and price ranges. Why buy from Kleyn Trucks? Simple! Bdodpfezdp S Uex Amnod • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask directly about our European warranty package.