Used Donau Exchange / Overhaul / New for sale (24,096)

Condition: excellent (used), S015019 PROD. BOGE TYPE C25 FD S/N 5068559 YEAR 2013 POWER (kW) 18.5 + 0.75kW CAPACITY (m3/min) 3.10 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 34833 FREQUENCY CONVERTER yes Nodpfx Abez Dwd Ns Uelg BUILT-IN DRYER yes HEAT EXCHANGER yes COOLED BY (AIR/WATER) air/water ON TANK no DOCUMENTS no NEW/USED USED

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 Nedpfjzu Nvzex Ab Ujlg - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base Nljdpfx Aew Ighieb Usg - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, model year 2021, from the premium manufacturer Rational (successor to the VCC 211). !!! Price upon request !!! Our in-house workshop has performed a fresh inspection, and the iVario L is in top condition. The offer does not include any accessories, but these can be purchased for an additional charge. The list price for this unit is €20,340 net = €24,204.6 gross. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21108058335 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional. Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and sweet dishes, soups and sauces, or the 5 cooking methods: boiling, frying, deep-frying, braising, and finishing. iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated Wi-Fi interface, e.g. for connection to ConnectedCooking. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Njdpfx Aszrfbhsb Uolg Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are only made in accordance with our general terms and conditions (GTC).

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: A230159, For sale: Refurbished shaft set for Arjes Impaktor. The shaft set has been completely overhauled and inspected for cracks. It is in good technical condition and ready for immediate use. All tools are new and made from HB500. The shaft set is ready for installation and can be supplied with either EVO 1 or EVO 2 cassette, as required. We accept your old shafts in part exchange. Price and further details upon request. Cost-effective shipping available throughout Europe. Tecweld GmbH is a company specializing in the refurbishment of wear parts. Our focus is on the repair and reconditioning of crusher and shredder shafts. This is precisely where our core competence lies. Thanks to our many years of experience and expertise, we are able to offer cost-effective solutions. In many cases, professional refurbishment is significantly more economical than purchasing new parts or carrying out time-consuming repairs in-house. For our customers, this means reliable technology, predictable costs, and an economical alternative to replacing new components. Please feel free to contact us – we are happy to advise you. Nedpox Td Npsfx Ab Uolg

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 306 kW (416.04 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,500 kg, input voltage: 400 V, total width: 950 mm, total length: 3,400 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 340 kW (462.27 HP), Watercooled chiller/Heat pump Climaveneta NX WN 1004 306 kW/340 kW Cooling capacity: 306 kW / 87.01 tons (12/7 — 35°C) Heating capacity: 340 kW / 96.68 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Kiplink Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410a Hydraulic module: 2 pcs. water pump Grundfos TPED 80-210/2 Dimensions: 3.4x0.95x2 m Weight: 1500 kg Nlsdpfx Aezw Axbsb Usg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), You are bidding on a Heidenhain UVR 140D Inverter, ID: 1084190-01, Power Supply Unit, SN: 59161711F, available on an exchange basis (exchange service). The unit has been professionally overhauled and fully tested, comes with a 3-month warranty, and is 100% functional. The delivery scope is as shown in the photos. Please note: Under the exchange procedure, your defective unit must not have any mechanical damage such as cracks or breakages, as these cannot be repaired. In such a case, an additional charge of €400 including VAT will be invoiced. Nodpfx Ajx Ettheb Uslg

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: E16352-1, Avermann AVOS SP-12 stationary baling press | Overhauled in 2023 | Not used since Nodpfx Absz Eqr As Uelg For sale: Avermann AVOS SP-12 stationary baling press, manufactured in 2010. This robust Avermann baling press was overhauled by us in 2023 and has not been used since. This makes it an interesting machine for those looking for a well-maintained used baling press that can be put back into operation immediately. The AVOS SP-12 is a robust baling press, suitable for compacting various waste streams and ideally applicable in industries such as manufacturing, logistics, production companies, and waste processing. Technical specifications: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2010 Serial number: E16352-1 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic press system Large feed opening Suitable for transport with a hooklift Special features: The machine was overhauled by us in 2023. After this overhaul, the baling press was not used and has remained idle since. Visually, the machine is in good, used condition. There are, of course, some minor signs of wear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling press at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling press, waste compactor, container press, waste compaction, recycling, compactor, press system, self-compacting container.

Condition: excellent (used), power: 150 kW (203.94 HP), fuel type: diesel, color: yellow, Year of construction: 2012, operating hours: 4,237 h, Year of manufacture: 2012 Drive: Wheeled Number of cylinders: 6 Unladen weight: 17,000 kg Working width: 427 cm Technical condition: Very good Optical condition: Very good NEW HOLLAND RG 200 B MOTOR GRADER + RIPPER, YEAR 2012, 4,237 HOURS Nodew Hqb Sepfx Ab Uelg Drive: 6x4 Engine: 6-cylinder turbo diesel Net power: 200 HP (150 kW) @ 2,200 RPM Operating weight: 35,274 lbs (16,000 kg) Blade length: 14 ft (4.27 m) Max. blade lift above ground: 17.7 in (450 mm) Max. blade drop below ground: 28.5 in (725 mm) Hydraulic flow: 34.3 GPM (130 L/min) Transmission: Full powershift, 6 forward / 3 reverse gears Turning radius: 24 ft 3 in (7.4 m) Travel speed (forward/reverse): 28 mph (45 km/h) / 19 mph (30 km/h) FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Nedpfx Aoq A Icqsb Ujlg

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, total width: 1,350 mm, total height: 1,500 mm, total length: 2,000 mm, overall weight: 1,350 kg, input voltage: 9 V, oil tank capacity: 250 l, Equipment: cooling unit, Briquette press POR Oscar, 9.2 kW, newly overhauled, with a new control panel, available immediately. Capacity up to 175 kg/h, briquette diameter 70 mm. A new cooling unit (chiller) can be added if desired. Can be inspected while powered on. Nsdpfx Abozq Hwbj Uelg

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Nedpfxsxc Eitj Ab Ujlg Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: ET1PA24025070612, This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, manufactured in 2024. It is suitable for the following Index model series: Index H and I, and can also be used for DUO units or individual units. This hood not only captures escaping vapors but also eliminates odors and smoke. You do not need an exhaust duct leading to the outside. An LED lamp automatically indicates when you need to replace the filter. This version features stainless steel baffle filters and a pre-filter mat located behind them. This protects the activated carbon filter (newly installed), which is the core component of the hood, from becoming contaminated too quickly and ensures optimal functionality. This Plus condensation hood can be used optimally in the front area, in enclosed spaces, or during show cooking. Retrofitting and installation on Rational SCC WE 61/101 can be carried out easily. The hood has been inspected in our in-house workshop and is fully functional, with a 6-month warranty. The stated price is the gross price, including 19% VAT. Service: We will gladly connect you with a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to an extensive range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional – or your money back Flexible shipping or self-collection options Competent advice – before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 854 x 1226 x 628 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Serial number: ET1PA24025070612 Year of manufacture: 2024 Power connection: V: 200 - 240 / Hz: 50-60 Weight: approx. 95 kg Condition: Used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC). Nodpszu Sc Defx Ab Ujlg

Condition: ready for operation (used), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (infinitely variable) Feed: infinitely variable approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column stroke (W): 410 mm Arm traverse: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (a valid VAT ID number is required). Interim sale reserved. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Nsdpfxsyrdc So Ab Uolg Technical data may vary and errors in the item description are reserved.

Year of construction: 2010, operating hours: 10,000 h, condition: refurbished (used), functionality: fully functional, MEWA UC 120 B with HNDE, 2 x 30kW / 15 RPM. Large bale infeed hopper. Includes a discharge conveyor and a 10-meter-long inclined conveyor. Neodymium magnet roller at the head. Nodpoz A R I Sefx Ab Ujlg The UC 120 B was manufactured in 2010 and completely overhauled in 2025. The cutter unit is brand new. New blades, new shafts, new bearings, new scrapers. Plus costs for dismantling and transport.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: NSBF40220, power: 156 kW (212.10 HP), Excellent functional condition Nlsdpfjyq Nvuox Ab Usg

Condition: ready for operation (used), You are bidding on a Heidenhain UM 116D Inverter, model 667 945-01, SN: 59397457B, offered through an exchange service. The unit is professionally and completely overhauled, thoroughly tested, and comes with a 3-month warranty. It is 100% functional, with the scope of delivery as shown in the photos. Important: In the exchange procedure, your defective return unit must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In the event of such damage, an additional charge of €1,000 incl. VAT will apply. Njdpfxox Etfws Ab Uelg

Condition: used, functionality: fully functional, power: 50.01 kW (67.99 HP), Year of construction: 2025, operating hours: 351 h, 2025 | New Holland L328 | Used Skid Steer Loader | 351 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Skid steer loader with a 68 hp Tier 4 engine, enclosed cab with air conditioning and heat, air ride seat, auxiliary hydraulics, rear-facing camera, and a new 72" bucket. ✔ Enclosed cab ✔ Air conditioning and heat ✔ Air ride seat ✔ LED lights Nedpjz Elnfefx Ab Uolg ✔ AM/FM radio ✔ Rear-facing camera ✔ Auxiliary hydraulics ✔ New 72" bucket ✔ 2-speed powertrain Key specs: Engine power: 68 hp Engine hours: 351 hr Operating weight: 3,855 kg Rated operating capacity: 1,270 kg Width: 1,773 mm (69.8 in) Emission standard: Tier 4 Powertrain: 2-speed What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support Njdpozc D E Isfx Ab Uolg - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: excellent (used), Year of construction: 2007, operating hours: 9,667 h, PROD. KAESER TYPE ASD57 T S/N 1187 YEAR 2007 Njdpfjztqvysx Ab Ujlg POWER (kW) 30 CAPACITY (m3/min) 4.65 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 9667/21953 VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER yes, R134a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled New bearings for pressure rollers and motor new tips opening width: 430 mm Nodpfx Aoqvz U Esb Uslg

Year of construction: 1996, condition: used, Year of manufacture: 1996 Nledpfx Aszu Nx Nsb Uog Thermoforming, die-cutting for production from PET, PVC, PS, PLA films, etc. Working area: 500 x 740 mm Forming height: 150 mm Maximum film width: 540 mm Film thickness: up to 1.5 mm Installed power: 13 kW Busch pump New control system. The machine was overhauled in 2020 and is fully operational; it can be viewed in operation near Warsaw. Price: 23,000 EUR

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 38,500 kg, empty load weight: 38,500 kg, digging bucket width: 299 mm, Year of construction: 2006, operating hours: 13,500 h, Equipment: standard shovel, steel tracks, NEW HOLLAND KOBELCO tracked excavator, year 2006, 13,500 hours, ISUZU 185 [kW] engine, 3,000 hours since replacement, 2.99 [m] bucket, weight 38.5 [tons]. Nsdpfezw Ntrox Ab Uolg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 19439, pressing force: 38 t, type of input current: three-phase, input voltage: 400 V, input current: 32 A, pressure: 200 bar, oil tank capacity: 80 l, year of last overhaul: 2023, operating pressure: 200 bar, input frequency: 50 Hz, Avermann AVOS SP-12 stationary baling container | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling container, year of manufacture 2014. This reliable Avermann baling container was overhauled by us in 2023 and has not been used since the overhaul. As a result, this is an interesting machine for anyone looking for a well-maintained used baling container that can be put back into operation immediately. The AVOS SP-12 is a robust baling container, suitable for compacting various waste streams and ideally applicable in industries, logistics companies, manufacturing companies, and waste processing plants. Technical data: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2014 Serial number: 19439 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Njdoz Enubopfx Ab Uelg Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic pressing unit Large feed opening Suitable for transport with a hook lift Specifics: The machine was overhauled by us in 2023. After this overhaul, the baling container has not been used and has been idle since. The machine is in good used condition visually. There are, of course, some minor signs of wear and tear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling container at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling container, waste compactor, container compactor, waste compaction, recycling, compactor, pressing unit, self-compacting container.

Condition: used, Year of construction: 2005, operating hours: 5,316 h, Equipment: all wheel drive, Equipment: * 5,316 operating hours * Engine power: 53.5 kW * 20 km/h * Hydraulic connections * Additional headlights * Rotating beacon * Quick coupler Other: * 1 previous owner * Originally delivered in Germany * Year of manufacture: 2005 * Service weight: 5,975 kg * Total weight: 6,500 kg * Brakes have an error message Since 1972, we have been your reliable partner for all things related to automobiles/commercial vehicles in 28832 Achim, near the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare a customized offer for you! We are interested in taking your commercial vehicle/construction machine in part exchange. Nlodpfx Asx Rfbzsb Usg If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally without a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale excepted.