Used Elmatech Welding Machine for sale (67,105)

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. Gkedpfsh N Sd Usx Akajb The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Gksdpfx Akohpf Iyoasb Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC, type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Gkodpfjguvtdex Akasb Spot and projection welding machine The CD (Capacitor Discharge) welding technology works according to the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with a relatively small mains connection. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat-sensitive components - welding of steels with high carbon content - welding of surface-coated workpieces Rated power: 12288 Ws Uc: 3200 Volt Capacity: 2400 µF Open-circuit voltage: 10 Volt Electrode force: 200-2000 daN, continuously adjustable Operating air pressure: 6 bar Mains fuse: min. 35 Amp. Operating current: 32 Amp. Mains connection: 400 Volt, 50 Hz - Programmable control unit megapuls CD-12000 - Parallel electrode guidance - Electrical 2-hand control panel located beside the machine - Control cabinet with control unit fixed to the machine Weight: 3000 kg Good condition

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Gkjdsxpf N Tepfx Akajb Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Godpfovlwh Dsx Akajkb Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Gkjdpfx Aeztyn Sjkaeb Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Electrode force: 235 daN Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch

Condition: new, Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Warranty: 12 months Gjdpfxsxl Uuds Akaekb --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / double stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Warranty: 12 months --- Gksdpfx Akoxl Ur Aoaeb Spotwelding electrodes + spare parts at stock

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 - Projection welding head for single-sided spot welding - Ideal for repair work in the bodywork area, ensuring the best welding quality Godpeg U A Uzefx Akaskb - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new

Year of construction: 2003, condition: ready for operation (used), A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible. Gsdpfxszqfwmo Akaokb

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Gjdpfx Akjqpgntjajkb Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Suction unit with hose guide

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg Gjdpfx Ajzfim Iokajkb - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: ready for operation (used), Migatronic MTE 440 WIG AC/DC welding machine for steel and aluminum. Water cooling system: Migatronic CTU 3000. The maximum welding current is 440 A. Inspected by EWM Service. You are welcome to visit us for an inspection. Gkedpfxoh Ib Ide Akaeb You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. If you have any questions, please do not hesitate to contact us by phone. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change. Shipping is exclusively to business customers; for private consumers, only collection is possible.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. Gkodpetkuvxjfx Akaob unused still in original packaging.

Condition: used, machine/vehicle number: 23500716, From business liquidation: Pulse welding system Kemppi Pro 4200 Evolution. The unit has been function-tested! 420 amperes power at 80% duty cycle. Welding range: 10-420A. Wire feed case Promig 530. MXE MLS control. 4-roller wire feed. Water cooling. 2/4-stroke operation. Torch 4 meters + wire, ground cable and pressure regulator. Dimensions in mm approx. 1260x440x1020. Gksdpfxsxq Rcuj Akajb

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details. Gjdjwq Hqkepfx Akajkb

Condition: new, Year of construction: 2026, The KL2000 machine combines welding, cleaning, and cutting into a single compact unit. It offers an energy-efficient, low-maintenance, ensuring high precision and fast operating speeds across various metal types. Technical Specifications: Laser Source: 2kW Laser Type: Fiber Laser (Raycus) Laser Wavelength: 1080 nm Adjustment of power: 10 - 100% Output Power Stability: < 3% Gkjdpfx Akezmtmheaeb Central focus distance: 150mm Adjustable axial run-out (weld seam): 0.1 - 5 mm Laser Cooling System: Integrated water cooling chiller Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 - 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 8 m Machine Dimensions (L x W x H): 1,000 x 550 x 650 mm Weight: 210 kg CE Certification: Included

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA Gksdpfxsu A Dg Ee Akasb sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Year of construction: 2007, condition: used, Technax welding machine HWS2202 from relay production / welding system for contacts semi-automatic stranded wire to contact incl operating instructions inside lined with black plastic plates without cooling unit Generator Harms-Wende HW2000 welding transformer: HWT 2108-6,3 (power rating at 20% 80kVA; voltage sec. 6,3V; 2 diodes) Gkedpfju Eqtqjx Akaeb year 2007

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, – Capacity: 8 kVA – Timer – 380 V Gkjdpjvbr Dlofx Akasb

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags Gedpfx Aezf Nk Tskaskb • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: excellent (used), 3-phase DC spot welding machine, A/DH version Brand DALEX Type PMS 14-5 G3 Thrust: 550 mm Rated power at 50 & duty cycle: 150 kVA Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg Godpov Uwyrofx Akaskb with double-stroke cylinder 4-position switch Main switch Mounted control cabinet according to VDE 0110 with 100-program MPS 8043/1 welding controller

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive Gkodpfx Aex Hi I Dokaob -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V Gsdpfx Aovyq Dujkaekb -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm Gsdpfozrupzex Akaekb with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036