Used Gmp Surelam-Pro 500D Roll Laminator Double Side Roll Laminator for sale (35,877)

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve Todpfx Asw A Amrsmkea - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Tedpfx Amsu Ekbnsksa Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Tsdpfsunrwnjx Amkoa Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Tsdpelikydjfx Amksa Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Todpfoifnxxjx Amksa Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: used, Double-sided cantilever rack for bar stock (custom-built) Height: 1.9 meters Rack length: 4.3 meters Frame spacing: 2000 mm Arm depths: 600 / 500 / 450 and 400 mm Load capacity per arm: approx. 200 kg Load capacity per level (per bay with 3 uprights): approx. 600 kg Total load capacity with 3 uprights: approx. 4800 kg Base width: 1000 mm - 3 uprights = 2 bays = Ideal for 6 meter bar stock - Uprights made of 100 x 50 x 9 mm U-profile - Support arms made of 100 x 50 x 7 mm U-profile - 8 arms per upright (total 24 welded arms) - 3 double-sided uprights with base - Bolted upright connectors made of rectangular tube - Diagonal bracing is missing Todpfx Aoxf Ut Hjmkja Assembled dimensions (L x W x H): 4400 x 1450 x 1900 mm Transport dimensions (L x W x H): 2100 x 1500 x 500 mm Total weight: 350 kg

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Todpsyyxc Rsfx Amksa

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 10229, functionality: fully functional, operating hours: 25,000 h, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 200 mm, grinding belt length: 1,800 mm, grinding height: 190 mm, height adjustment type: electric, actuation type: electric, total height: 1,890 mm, total length: 2,070 mm, total width: 1,020 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, The machine is in very good condition, has been used only a little, with the option of refurbishment upon agreement. Todpfsyt Hkuex Amksa

Condition: not inspected (used), Maximum working length: 1500 mm Tilting capacity of heads: from −10∘ to +45∘ Swivelling capacity of heads: from −10∘ to +90∘ Motor power, machining unit: 2×2.25 kW (3 HP) Motor power, drilling unit: 2×2.25 kW (3 HP) Longitudinal movement motor power: 1×2.25 kW (3 HP) Saw blade diameter: 400 mm Saw/drill rotational speed: approx. 3000 rpm Tsdjxz Um Sspfx Amkea CONDITION UNKNOWN – NOT TESTED

Condition: excellent (used), Max workpiece length: 3600 mm Min workpiece length: 350 mm Max workpiece width: 200 mm Min workpiece width: 70 mm Max workpiece height: 100 mm Min workpiece height: 25 mm Total machine height: 1900 mm Minimum worktable height: 950 mm Worktable guide length: 4000 mm Worktable guide width: 170 mm Todjxvmttepfx Amkja Total saw blade unit guide length: 110 mm Max table stroke: 110 mm Max drill head stroke: 150 mm Number of drill spindles: 5 pcs (spacing 32 mm) Saw blade diameter: 350 mm Drill head motor: 2 x 1.5 HP Saw blade motor: 2 x 3 HP

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 50 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 200 mm, rotational speed (max.): 18,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Panel width max.: 2,500 mm Panel width min.: 130 mm Panel height max.: 50 mm Panel height min.: 8 mm Panel length max.: 200 mm Panel length min.: 30 mm UNITS Sizing unit Unit: Trimming Unit: Corrections automatic engagement based on timer Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Tjdpfx Amjxxavtokoa Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge processing unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge processing unit 4 Unit: Brush Number of motors: 2 Edge processing unit 5 Unit: Top router Number of motors: 1 Edge processing unit 6 Unit: Top router Number of motors: 1 MACHINE DETAILS Installed total power: 12 kW Adhesive system: PUR Pressure type: rubber-coated belts Number of units installed in sizing: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Todpfevy Aipsx Amkoa Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark Todjxfl Eajpfx Amkea

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, edge thickness (max.): 3 mm, workpiece weight (max.): 50 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (roll stock) - Material thickness: 0.4 - 3 mm Maximum edge cross-sectional area (plastic): 135 mm Maximum edge cross-sectional area (veneer): 100 mm Maximum roll diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edging up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edging up to 3 mm Cross processing speed: up to 30 m/min for panel sizing Cross processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separating agent spray unit Glue application unit A3 with 2 rollers Profile milling unit FF12 top/bottom with motors 12,000 rpm Finishing unit FA11 top/bottom Steplessly adjustable positioning cams with a maximum cam stroke of 25 mm Tedsx Ezz Hspfx Amkea Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Tjdpoy Ax Thsfx Amksa

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Tjdpfx Amex Upt Ajkja Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Working width of the line 1300 mm The line consists of the following devices: - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine Tjdpfx Amjtut Dxokea - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, COMPLETE FACTORY FOR MOBILE PRODUCTION FOR SALE 1 pc AUTOMATIC ANGULAR PANEL SAW Manufacturer: HOLZMA – Germany Model: HCL 11/56/22 Serial No.: 0-241-17-0009 Year: 2001 1 pc AUTOMATIC SIZING, EDGEBANDING, AND BORING LINE INCLUDES: - BRIDGE VACUUM LOADER - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 525/6/A3/15 Serial No.: 0-202-10-1687 Year: 2007 - 90-DEGREE ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: PROFI TB 10/25/12 Serial No.: 0-205-10-5100 Year: 2007 - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 526/8/A3/15 Serial No.: 0-202-10-1689 Year: 2007 - ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: OPTIMAT TDL 310/25/12 Serial No.: 0-205-10-1688 Year: 2007 - BORING MACHINE Todpfx Amoxwt Igekja Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2754 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2755 Year: 2007 - BRIDGE VACUUM UNLOADER

Condition: used, Year of construction: 1996, machine/vehicle number: 96T233, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - Tilting blades 45° - N. 2 motors 1.1 kw Tsdpfx Ameqmpl Askea - Blade diam. 330 mm - V. 380/50 - S/N 96T233 - Year 1996

Condition: used, Year of construction: 1999, machine/vehicle number: 99T318, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - 4.5 kw - Blade diam. 330 mm Tjdpfxsqmpnae Amksa - V. 380/50 - S/N 99T318 - Year 1999

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 000929, saw blade diameter: 350 mm, pivoting range: 35 °, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC TYPE TD1200 CA - CE RULES - N.2 motors 2 hp - Blade diam. 350 mm - Min/max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Complete with manual and CE declaration - With automatic loader - Serial no. 000929 Todpox Rvmbjfx Amkea - Year: 2001 - CE rules

Condition: used, Year of construction: 2003, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - Working length mm. 1200 - Max tenon length 100 mm Tjdsmxktpopfx Amkea - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF - Volt. 380/50 - S/N 772 - Year 2003

Condition: used, Year of construction: 1996, machine/vehicle number: 518, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) Tedpfx Amernnmpskea - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF2 - Nc ISAC - Perimetral net - Volt. 380/50 - Year 1996

Condition: used, SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 - volt. 380/50 Todpfeiux Izex Amkja - s/n 2401011 - ce rules

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 961228, cutting width (max.): 1,200 mm, pivoting range: 35 °, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - N. 2 motors 2 hp - N. 2 blades diam. 350 mm - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Volt. 380/50 - S/N 961228 - Year 1996 Todpjx Rw H Asfx Amkea