Used Haas Ec400 for sale (332)

Condition: used, Year of construction: 2018, An immaculate ex University research facility machine that is hardly been used. Photographed as it it arrived and not yet cleaned! 2018 built HAAS Mini Mill... Machine Control: Haas CNC Table Size: 36" x 12" Machine Travels (X/Y/Z) : 16" x 12" x 10" (406 x 305 x 254 mm) Spindle To Table Distance : 4" - 14" (100 - 346mm) Table Capacity : 500 Lbs.(1200 Kgs) Spindle Speeds : 6,000 Max RPM Rapid Traverse Rate (X/Y/Z) : 600 IPM (15M/Min) Maximum Cutting Feed Rate : 500 IPM (13 M/Min) Tool Changer Style : Carousel Tool Changer Capacity : 10 Stations Tool Change Time : 4.2 Seconds Max Tool weight : 12 Lbs. Bjdpewzyd Eefx Amnewp Spindle Drive : 7.5 HP Equipped with: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals Control: HAAS Spec: Travel X406 Y305 Z254 mm | 8000RPM | BT40 Accessories: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. • Chuck size: 10 in (≈254 mm) • Maximum bar capacity (through spindle): 3 in (≈76 mm) • Maximum part swing over front apron: 31.75 in (≈806 mm) • Maximum cutting diameter: 13.75 in (≈349 mm) using BMT65 turret • Maximum cutting length: 32.5 in (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 in (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 Bwedoyw N Dtopfx Amnep • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-centre milling, drilling, and tapping • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195–260 V (region dependent) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment • Powered (live) tool holders • Various tool holders • Liners

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Bwjdpfx Aey Hvp Ismnjp

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, We are offering this used HAAS GR-510 gantry milling machine, year of manufacture 2015. Machine Options: Tool Changers: - 20-pocket carousel tool changer 4th / 5th Axis: - 4th-axis drive and wiring Probing: - Wireless intuitive probing system Bwodpfx Aoyxx Azemnep Chip & Coolant Management: - Chip and coolant guard - Gantry router coolant system - Programmable coolant nozzle The Haas Control: - Early power-failure detection module - Rigid tapping Product Options: - 6" extended Z-axis clearance - Steel table, metric Legacy Options: - CT-style tool changer grippers - 10,000 rpm spindle, 15 hp - Remote jog handle, color LCD

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle Speed 7500 RPM Spindle motor power 22.4 kW Movement X-Axis Movement 2134 mm Z-Axis Movement 762 mm Y-Axis Movement 813 mm This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. Bwsdpex Imrpefx Amnop Application Types Milling

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal Bwedpjwvf Thjfx Amnsp - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Bjdpfxewvgbys Amnjwp Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree Bodpoxva Ahefx Amnjwp C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 863 mm, turning diameter: 432 mm, rotational speed (max.): 3,400 rpm, swing diameter over bed slide: 762 mm, controller model: Haas CNC Control, TECHNICAL DETAILS Turning diameter: 432 mm Turning length: 863 mm Spindle speed: 3,400 rpm Spindle bore: 88 mm Tool turret: 12 stations Tool holder: VDI 40 Swing diameter over bed: 762 mm Swing diameter over cross slide: 432 mm Three-jaw chuck diameter: 254 mm Tailstock quill ISO: 290 Bar capacity: 76 mm Travel Z-axis: 864 mm Travel X-axis: 287 mm MACHINE DETAILS Control: Haas CNC Control Spindle motor power: 22 kW Dimensions & Weight Required space: 3.9 x 2.0 x 1.9 m Machine weight: 7.25 t Bwodpfjywhfvex Amnsp EQUIPMENT Technical documentation

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 1097415, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 318 kg, overall weight: 6,350 kg, table width: 508 mm, spindle speed (min.): 10,000 rpm, table height: 324 mm, Technical Data BRAND: Haas MODEL: MDC-500 SERIAL NUMBER: 1097415 Year: 2012 Numerical Control: Haas Location: Tabaza (Asturias- Spain) TABLE DIMENSIONS Table surface: 508x324 mm. Number of tables: 2 Maximum weight on the table: 318 kg. RANGE Longitudinal travel X: 508 mm. Transversal travel Y: 356 mm. Vertical travel Z: 508mm. SPINDLE Cone: BT40 Spindle speed: 10.000 r.p.m. 22.4 Kw 122 Nm ATC Capacity: 24 Station Tool change time: 4.8s ADVANCES Working feeds: 21.2 m/min Rapid feeds: 25.4 m/min WEIGHT AND DIMENSIONS Machine dimensions: 3.632x3.404x2.870 mm. Machine weight: 6.350Kg. Bodpfstr Uflex Amnjwp ACCESSORIES Programmable coolant Chip conveyor Renishaw T527R probe

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Number of axis 2 Bwodpsx H Uz Njfx Amnsp This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HAAS, This 3-axis HAAS SL-30 was manufactured in 2001. A robust horizontal turning machine featuring a 3400 rpm spindle, Ø76mm bore, and a 10" chuck. It includes a tailstock, 12 x VDI40 tool stations, a toolsetter, and a conveyor. If you are looking to get high-quality turning capabilities consider the HAAS SL-30 machine we have for sale. Contact us for more information. • Tailstock • 12 x VDI40 • Toolsetter • Conveyor Bjdpfx Amjx H Uzvonowp

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing Bsdpfsyid Hvjx Amnewp • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Bedpsyh Hw Iofx Amnewp Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: ready for operation (used), Year of construction: 2006, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2006. It operates on a voltage of 360-480, with a phase 3 and frequency of 50/60 Hz. The full load capacity is 20 AMPS, with a largest load of 35 AMPS. Consider the opportunity to buy this HAAS VF-8 vertical machining center. Contact us for more information. Bwedox D Ep Ajpfx Amnep • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 20 A • Largest load current: 35 AInternal cooling 21 barSpiral chip conveyorProgrammable coolant nozzleNew gearbox and spindle installedIn June and July 2024, the following components were renewed:GearboxVector drive, spindle driveDecember 2024: Double arm tool arm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h • Table: • Size: 1,372 × 457 mm Bjdpfxjx D I Stj Amnswp • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. • Chuck size: 8" (210 mm) • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Bwsdsx D Nzpspfx Amnep Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher • USB port • 6 live tools (3 axial and 4 radial) • BOT holder and VDI holder

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, total height: 2,000 mm, controller manufacturer: HAAS, number of axes: 2, This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Turning diameter over bed: 762 mm • Tool turret vdi: 12 tool positions • Turning length: 860 mm Bodpfxeyar Ths Amnswp Extra Information Machine still under power Dimensions Machine Depth 3300 mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, controller manufacturer: HAAS, controller model: n/a, total height: 1,473 mm, table load: 1,350 kg, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Dimensions Bjdpfx Amox D Eg Uenswp Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Bwsdpex Hblujfx Amnjp Technical Machine Benefits • Tool changer: 50+1 tool changer • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets • 21 bar trough spindle • 15" screen Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, controller manufacturer: HAAS, number of axes: 2, Horizontal turning machine manufactured in 2001. This HAAS SL-30THE was designed for precision with a spindle speed of 3,000 RPM and a claw chuck diameter of 254 mm. With an X-axis travel of 287 mm and a Z-axis travel of 864 mm, it offers reliable performance for turning applications. Consider the opportunity to buy this HAAS SL-30THE horizontal turning machine. Contact us for further details. Bwedpfsyhb Rrox Amnjp • Claw chuck diameter: 254 mm • The machine runs, but the Vector drive malfunctions when slowing down the engine Vector drive is less than a year and a half old, and repair is likely an option.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V Bwjdpfx Amsyhfltonsp • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: Bwjdpfx Aox D I Smomnsp • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 2,667 mm, table load: 1,361 kg, overall weight: 3,300 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 20, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VF-1 vertical machining centre was manufactured in 2013. It features a HAAS control, a spindle power of 22.4 kW, and a spindle speed of 8100 RPM. The machine includes a carousel-type tool magazine with 20 positions and a coolant capacity of 208 liters. If you are looking to get high-quality milling capabilities, consider the HAAS VF-1 machine we have for sale. Contact us for more information. Bwedpfxsygld Hj Amnop • Table: Length 660 mm; Width 356 mm • Tool magazine: Carousel, 20 positions • Coolant capacity: 208 l • Set of tool holders included Dimensions Machine Depth 2489 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. • Tool changer: 40+1 tools (CT as provided) • Through‑spindle coolant (TSC) 21 bar • Air through spindle • High‑Speed Machining Bedpfxsx Imtte Amnowp • Programmable coolant nozzle (P‑Cool) • DWO/TCPC • Auto Door • Side window • Top roof/enclosed top Additional equipment • Chip conveyor • Renishaw probes (probing system) • Robot interface