Used Hammer - Felder Group N 3800 for sale (55,450)

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Nljdjv Hm Nmepfx Ahnof Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 1978, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 24, overall weight: 1,40,000 kg, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Nedpfolnlq Dsx Ahnslf Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Year: 2008 Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg Nlodof Ecwzepfx Ahnsf

Condition: new, Year of construction: 2026, - soft start / stop - pre-stretch tension - additional engine - height 2.4 m - ramp / platform - platform diameter 1.65 m - film stretch up to 350% - Strong chain drive - man-hour and pallet counter - regulation of wrapping speed 3-12 rpm - the ability to adapt the device according to the customer's needs - 230V power supply - Automatic return to the starting position ADDITIONAL FEATURES: - Very easy to use - Operating hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the palette Nlsdpfx Ahjr Hbfljnof - Adjustable wrapping speeds Pallet wrappers are designed for machine wrapping of goods stored on pallets with stretch foil. They are especially recommended where very high efficiency and low labor and financial costs in the packaging process are required, i.e. in distribution centers, warehouses, logistics centers, production plants, as well as in smaller companies. – increasing the efficiency of the packaging process – the ability to set the required parameters by machine and the high rotational speed of the wrapping plate makes machine wrapping much shorter than manual wrapping, and the employee during foiling can be involved in other activities, e.g. preparing or delivering another pallet, – repeatability of packaging – wrapping with a wrapper allows you to maintain an identical method of packaging for a specific type of cargo, repeatability of a once developed and appropriate method of packaging allows for safe storage and transport of goods, – load stability – the wrapper, thanks to the adjustment, allows you to adjust the wrapping method even to very diverse loads in a reliable way and guarantees the stability of the load on the pallet, which guarantees avoiding possible damage to the load.

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, elastic claw coupling -Type: 65 CH-NR.145147 N Njdpst Trzdjfx Ahnjlf -Bore hub: Ø 75 mm / Ø 60 mm see photo technical drawing -Number: 2x coupling available -Price per piece -Dimensions: Ø 135 x 210 mm -Weight: 13.9 kg

Condition: good (used), Angular gear motor, geared motor, electric motor, three-phase motor -Speed: 16 rpm -Power: 0.75 kW -Design: B3 angle -Shaft diameter: Ø 35 mm -Height of shaft axis: 140 mm -Brake: yes -Protection class: IP 55 Nlodpfoc Np Diox Ahnjf -Dimensions: 525/240/H220 mm -Weight: 44 kg

Condition: used, Air bellows, roller bellows, air cushions Nsdjb A Tfzspfx Ahnolf -Number: 2 pieces -Manufacturer: Contitech -Type: 644 N -Package price -Weight: 2 kg

Condition: used, Power generator, emergency power generator, generator, power generator, power generator, emergency power generator Nodpfsdparysx Ahnslf -Power: 3 kW -Engine: Briggs & Stratton -Sockets: 2 x 220 V lighting current -Dimensions: 820/620/H460 mm -Weight: 60 kg

Condition: good (used), Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1691-NCPressure: 16 bar -Operating voltage: 24-20 VDC Nedpfsb A N Ayox Ahnelf -Signal output: 4-20 mA Price: per piece Quantity: 2 available -Weight: 1 kg

Condition: used, Turntable, slewing ring -Outer diameter: below 650 mm -Inside diameter: above 460 mm -Height: 52 mm -Load capacity: 2500 kg Nodpedq Ttyefx Ahnolf -Number: 2x available -Price: per piece -Weight: 23 kg

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Nodpfsi Dfidjx Ahnelf Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: ready for operation (used), Indramat MDD071C-N-060-N2S-095GA0 permanent magnet motor, serial number MDD071-09260, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nledpei D Iuvsfx Ahnof

Condition: new, Rexroth Indramat MDD071B-N-060-N2M-095GA0 permanent magnet motor, unused, 100% functional. Nledpfx Aei D Ndtshnsf

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor Nljdpfx Aei Eg Nnohnef -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Nodswhmdfspfx Ahnolf Max. useful working tickness (mm) 150 Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: good (used), Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4656 N -Voltage: 230 V 19 W Nedpfx Ahopwnf Tsnjlf -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type CB SF 150-63 N/40 -Speed: 23 rpm -Engine: 0.18 kW / 1360 rpm -Hollow shaft: Ø 20 x 85 mm Nledet E D Eljpfx Ahnsf -Protection class: IP54 -Total dimensions: 260/250/170 mm -Weight: 12.5 kg

Condition: good (used), Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Krohne, variable area flow meter -Type: DK800/N Nljdpogh Iw Ssfx Ahnof -Measurement: gas or liquid quantities -Number: 5x measuring devices available -Price: per piece -Dimensions: 175/105/H30 mm -Weight: 0.5 kg/piece

Condition: used, Tool holder, milling holder, milling tool, Njdpfx Ahjgkw Igjnslf -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Condition: used, Air demolition hammer Nlsdpfx Ahecm I Uijnef -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg

Condition: used, Stick electrodes 4.0 x 350 Nedpjd Emg Rjfx Ahnelf -Type: Hera Blau N -Price: per package -Number: 4 packages available -Weight per package: 4.7 kg

Condition: excellent (used), OMSG LAUCO 100 N-SP4 Type: Roller conveyor Max. width of workpiece: 1.000 mm Nledjzh H Ibopfx Ahnef Max. height of workpiece: 400 mm MAx. loading/roller: 800 kg Nr. Of turbines: 4 Turbine wheel diameter: 350 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min x 4 Transport speed: 0,5 - 3 m/min Cleaner type: Airwash Filtering unit: Included FX20/1 Foundation: no Total width of machine: app. 5.500 mm Total height of machine: app. 4.500 mm Total length of machine: app. 12.000 mm Max installed power: app. 50 kW

Condition: used, Furnace, Chamber Furnace, Heat Treatment Furnace, Hardening Furnace, NABERTHERM Professional Industrial Chamber Furnace – 1150°C, Used Machine Manufacturer Nabertherm (Made in West Germany) Model N81 Serial Number 72019 Year of Manufacture 1988 Item Number 7082 Technical Specifications Maximum Temperature: 1150°C Power Rating: 18 kW Operating Voltage: 380 V, 3N~ (Three-phase industrial power supply, 50 Hz) Njdpfxozc Ihae Ahnslf Current Consumption: 27 A Furnace Door Opening: 500 × 250 mm Overall Dimensions Width: 1200 mm Depth: 1800 mm Height: 1750 mm

Condition: new, overall weight: 200 kg, operation weight: 1,900 kg, Year of construction: 2026, New hydraulic hammer for excavators from 20 tons upwards, filling kit. Nlsdpfxjzghb Te Ahnef

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees Nedpfx Asy Tm Rpehnjlf - Spare milling spindle: included