Used Hammer Gmbh Larus Endogas Generator for sale (76,196)

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: Ppedpfxjznz Eze Apbow • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: new, functionality: fully functional, overall weight: 2,200 kg, Year of construction: 2026, Original hydraulic hammer Podpfjzltctox Apbepw For excavators from 22 to 33 tons.

Condition: used, Year of construction: 2015, Technical details: Ppsdpjzgu Aqjfx Apbsw x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Weight approx.: 6,6 t

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar Ppjdpfxoyycqxe Apbjw • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, overall weight: 160 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,930 mm, input voltage: 230 V, input frequency: 50 Hz, laser wavelength: 10,600 nm, type of input current: AC, laser type: CO₂ laser, Equipment: lighting, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. Ppjdpswkpyhjfx Apbow 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) - optional: extension arm for large workpieces (also on both sides) - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with operating system Windows - frame made of aluminum profile - air cooled - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) - Weight: approx. 140 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, travel distance Z-axis: 300 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Pedpfxjxd Az No Apbspw With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, total length: 900 mm, total width: 1,550 mm, total height: 1,900 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled Ppodpjunh H Sofx Apbjw - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each Podswcaqhjpfx Apbepw - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth - 1x flange heating zone - 2x die heating zones Ppedezmnp Rjpfx Apbow - die connection IDE M70x2

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Dimensions: 1200 mm x 600 mm x 2100 mm Ppedpfxswxza Ne Apbjw

Condition: used, Year of construction: 2012, Automated system / Application area: Chrome plating, nickel plating, copper plating / Programs: Pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Product window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per carrier, cycle time 3.00 min. per system, cycle time 2.50 min. for demetallization / Capacity: 20 carriers per hour, clear anode spacing (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entry dimension 550 mm in travel direction, 3100 mm in width, tank dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: transport system 133 kW, filters 194 kW, exhaust air 229 kW, wastewater treatment plant 150 kW, switching systems 704 kW, rectifiers approx. 3190 kW, heating energy approx. 1410 kW / Consisting of: automated loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths and exhaust system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating plant since 2015! Podoy Rvtuepfx Apbspw

Condition: used, Pressure intensifiers, pressure medium converters, flow control valves Ppodpsd Al Hmjfx Apbsw -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

Condition: good (used), Converter, power supply, power supply unit -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece Podpfx Ajffwpaopbepw -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece

Year of construction: 1995, condition: used, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve Additional title: Refrigerated stainless steel tanks for outdoor installation Capacity: 74480 l Operating pressure: 0,9 bar Width: 12,55 m Height: 3,27 m Pedpfx Apozgcvlebjpw Material: Stainless steel Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 110362L0 / 110363L0, PKM Packaging GmbH / KOCH Pac-Systeme GmbH – Fully Automatic Pharmaceutical Packaging Line For sale is a high-quality, fully automatic packaging line from PKM Packaging GmbH / KOCH Pac-Systeme GmbH (year of manufacture 2012) for pharmaceutical, medical device, diagnostic, healthcare, and cosmetic products. The line consists of two interconnected machine modules and handles the complete secondary packaging process – from the automatic erecting of folding cartons, product insertion and grouping, to closing, labeling, marking, check weighing, and rejecting defective packages. Equipment: Automatic carton erector Collation packer Carton closer Mettler Toledo Garvens XS3 checkweigher (7–700 g / 0.1 g) Pjdpszmp Tqsfx Apbopw BLUHM label printing and dispensing system Wolke m600 inkjet marking system Camera and inspection systems Modern touch panel operation PLC control with recipe management, user management, and fault diagnosis Servo drive technology with EtherCAT Complete protective enclosure with safety monitoring Technical data Manufacturer: PKM Packaging GmbH / KOCH Pac-Systeme GmbH Year of manufacture: 2012 Machine numbers: 110362L0 / 110363L0 Operating voltage: 400 V AC Frequency: 50 Hz Connected load: 6 kW + 3 kW Compressed air: 6 bar Enclosure protection class: IP44 Last used packaging formats The system was last used for the folding carton sizes shown in the appendix. The attached die drawings show the last used carton blanks and formats. Conversion to other folding carton formats is possible, depending on the packaging size and product design. Original investment value Garvens checkweigher (Mettler Toledo) – €27,695.00 KOCH carton packaging system VM0059 – €794,497.34 PKM carton packaging system VM0059 – €266,061.66 Other components and integration Total investment of the packaging line: approx. €1,351,161.00 Scope of delivery complete packaging line Carton erector Collation packer Carton closer Conveyor and roller conveyors Checkweigher Labeling and marking systems Camera and inspection technology Control cabinets technical documentation including electrical diagrams, pneumatic diagrams, drawings and parts lists The system is in very good condition and is currently installed in a pharmaceutical plant. Inspections are possible by appointment. We will gladly send functional videos, technical documents, information on disassembly, packaging, and worldwide shipping upon request.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, Compact combination machine with 5 functions: sawing, milling, surfacing, thickness planing, and long-hole drilling. Sliding table, 800 mm; max. saw blade 315/100 mm cutting height; milling cutter, 3 speeds; surfacing and thickness planing, 310 mm; long-hole drilling support; year of manufacture 2002; 3 kW motors; mobile base. Podpfxjziz E Rj Apbspw

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was used during the development of a vertical wind turbine and operated for a few hours before this development phase was discontinued. The switchgear cabinets were coordinated or assembled with the generator by a professional company in Offenburg. Pedpfjyl Nntsx Apbepw I would be glad if the equipment could be put to new use. Price negotiable upon collection.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece Pedpfxjzmzbms Apbspw • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12399, TSM/tsi rotary vibrating screens are used for the classification, screening, and dedusting of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine offered for sale has a diameter of 1200 mm and is equipped with 3 screen decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare screens with the following dimensions are included: • 1 mm x 1 piece • 0.5 mm x 2 pieces • 0.17 mm x 1 piece • 1.4 mm x 1 piece • 5 mm x 1 piece • 4 mm x 1 piece • 1.8 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. Ppedpfx Aezmzbgjpbow The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 1989, condition: good (used), functionality: fully functional, machine/vehicle number: 18678, Used 100,000-liter steel tank Ppodpfxjzaquwo Apbow Year of manufacture: 1989 Located in 79423 Heitersheim Price is negotiable

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The offer includes a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. It is designed for the production of: • round, marked buns • elongated, unmarked buns • cut buns • twisted buns • Kaiser rolls • hot dog buns • Poznań-style buns Product description: • Fully automatic and compact bun production line • Based on a Mini Rex Futura divider-rounder from 2009, which is rotary • 2-row operation • Manual removal of products from the discharge conveyor • Marking station with easily replaceable tools; includes heads for: Kaiser rolls and Korinsky buns • Integrated elongation and flattening unit • Weight range: - for marked buns from 25g to 75g dough piece weight – output: Psdpjy And Nefx Apbopw from 1,800 pieces/h to 2,640 pieces/h, - for unmarked buns 80g - 125g dough piece weight – output: from 1,800 pieces/h to 3,960 pieces/h. • Fermentation time: approx. 6 minutes at an output of 2,000 pieces/h • Dough types: wheat, whole wheat, yeast dough, donuts. • Single-person operation The machine is in the final stage of renovation. The attached photos show its current, actual condition. If you are interested in the price and would like to see more photos, please contact us.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Ppedpfx Apswgc I Rsbsw Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2015, operating hours: 3,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: R1805, Description: Take a look at WOKO MAGNET UND ANLAGEBAU GmbH. Ppjdpfxezgbrrj Apbsw

Condition: good (used), Year of construction: 2011, SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 µm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample types: Supports standard SBS plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes and microscope slides Throughput: Can expose up to 250 plates per day Automation: Fully automated with options for integration into robotic systems Voltage (U): 100 - 240 V AC 50/60 Hz Power (P): 295 VA max Manufactured: 01/2011 You can find more items - new and used - in our store! Pedewv Rayjpfx Apbopw International shipping costs on request!

Condition: ready for operation (used), Two custom-built machines for the automatic production of pre-grouted tile panels are available. Bonding material: two-component PU grout, max. production capacity: approx. 50m²/h, min. tile format: 97mm/97mm, max. tile format: 197mm/197mm, splitter plate format: 244mm/119mm. This is a complete production line up to the packaging stage. The PU pipes have become clogged after a long period of time and must be replaced. Including various spare parts. Documentation available. An on-site inspection is possible. Psdpfxszli Tzs Apbspw