Used Inverted Flow Packer for sale (5,768)

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Njdpjy Ecuzefx Ab Uewl Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NM-FF2026, Equipment: CE marking, Frozen fish weighing dispenser integrated into the fish feeding, sorting, 10 kg weighing and packaging line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60. Number of heads: 14 pcs. Weighing type: weight sensors. Weighing accuracy: 0.1 – 1.5 gr. Pocket volume: 5 liters. Dosing in one cycle: max. 4000 gr. Pocket opening type: from two sides. Nominal speed: up to 180 cycles/min. Pocket drive: stepper motors. Air dehumidifier: above 0 degrees. Electricity AC 240V, 50 Hz, Consumption 1.0 kW; Equipment weight: 800 kg. Machine dimensions: 2600 x 2600 x 1450 mm (for clarification) Control: 12.1 ” touch-sensitive display. Number of programs: up to 99. Room temperature range: from 0 C to + 40 C; External vibration compensation: 4 built-in load sensors for external vibration compensation. Protection class: IP 66, condensation-resistant, completely washable Automatic zeroing: Yes. Self-diagnostics: Yes. Remote diagnostics: Yes. RCU cable. Conformity: CE. -Flow Pack type packaging machine PFM Zenith EW Servo. Equipment for forming pre-cut packages from a film roll. Packaging data: −Package width 100 - 320 mm. −Package length 80 - 400 mm. −Max. package volume 6 liters. −Max. roll width 700 mm. −Film roll diameter max. 350 mm. Mechanical speed: up to 90 cycles per minute. The actual speed will be specified after tests with real product and packaging material. THE BASIC SET OF THE MACHINE INCLUDES: The machine frame, electrical cabinet, melting jaws, vertical melter support made of stainless steel. Roll holder with centering cones. One forming tube made of stainless steel for pillow-type packaging (diameter optional). Photo sensor for printed film and encoder for determining the length of the package. Vacuum belts for film feeding. Machine version with a slope for product and packaging safety. Product holding mechanism before jaws. Packaging support. Vertical seam sealing bar with pneumatic drive. Machine functions are controlled via PLC Siemens. Photo sensor for working with printed film. Possibility to save up to 99 different programs. Machine control via touch sensitive panel 12.2". Machine self-diagnosis. Notes: The machine is designed to work with hot jaws MACHINE DIMENSIONS (base model): Height: 1600 mm. Width: 1280 mm. Depth: 2200 mm. Weight 550Kg. Air consumption: 350 NL/minute. Electricity consumption: 4 Kw. Connection: 400 V. 3 Ph. - 50 Hz. Nwjdpfov Dit Nex Ab Uel 2. Multifunctional line, in accordance with the requirements and premises of the customer. Designed for feeding fish from IFQ, sorting, accumulating in containers, as needed, weighing 10 kg, forming cardboard boxes and feeding tilted boxes to sealing and pallets. The line consists of: - c) Feed conveyor to weighing 10 kg - d) Reversible conveyor for feeding filled boxes to sealing - e) Reversible conveyor with control from scales with two weighing places - f) Roller, gravity, conveyor for feeding empty boxes to 10 kg weighing places - g) Roller conveyor for feeding empty boxes to the 1kg packing table - h) Work table for packing 1kg packages into boxes - i) Rotary table for accumulating 1kg packages - j) Product feed conveyor to the MFG - k) Conveyor for feeding products from the MFG to the packer - l) Conveyor for feeding 1kg packages to the Rotary table - m) carton former, automatic - n) carton sealer -p) Xray

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Nwsdpfx Ajhkzttsb Uel Filter area: 9.21 m² Noise emission Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug, 5-pole, and phase inverter Two swivel casters and two fixed casters with parking brake Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Good working condition. Please check out our other listings as well. Nwsdpjupx E Isfx Ab Usl

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling unit, cooling unit -Manufacturer: Fronius, Cooling unit for Frowig 260 AC/DC TIG welding machine -Type: FK 31 -Flow rate: max. 6.5 l/min -Dimensions: 250/210/H650 mm -Weight: 19 kg Nwsdpfx Ajlp Uzbob Ujl

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Nwodpfovmq Tiex Ab Usl

Condition: like new (used), functionality: fully functional, overall weight: 130 kg, USED WELDER INVERTER MULTIPROCESS 520A, MIG/MAG-TIG-MMA, CEBORA KINGSTAR 520 TS. Nwjdpfx Aszxwy Neb Uel

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Nedpfxjupx E Uo Ab Uowl

Condition: used, Year of construction: 2002, Overview This SMI SK 452 T is a shrink packer for PET bottles, built in 2002 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30,000 bottles per hour. It handles 0.5 l, 0.75 l, 1.0 l and 1.5 l bottles in 3x2 packs and 0.5 l bottles in 4x3 packs, and has a pass-through mode for running bottles unpacked. The wrapping section is fully enclosed by safety guarding with viewing windows. The machine has been running as the shrink packer of a PET bottling line for water and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SMI (Italy) - Model: SK 452 T - Year of manufacture: 2002 - Machine type: shrink packer for PET bottles with integrated heating tunnel - Output: up to 30,000 bottles/hour - Pack formats: 0.5 l (3x2 and 4x3), 0.75 l (3x2), 1.0 l (3x2), 1.5 l (3x2) - Pass-through mode for unpacked bottles - Location: Germany Equipment - Multi-lane bottle infeed with lane dividers - Pack collating and film wrapping unit with film reel holder - Integrated shrink tunnel (heating oven) Nsdpfx Ajz Elkyob Uewl - Full safety enclosure with viewing windows and emergency stops Condition The machine is still installed and under power and in regular production. It can be visited and inspected in operation on site. Availability The machine is available from 31 October 2026. It is located in Germany.

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: Nsdewwt E Ujpfx Ab Uewl A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: new, Side Channel Blower, Two-Stage The VASF 2.50/2-0.AC230 is a turbomachine with a VARIAIR frequency converter, offering high performance with 100% oil-free and contactless operation. These side channel blowers are low-maintenance, highly efficient, and require minimal servicing. Features VARIAIR Frequency Inverter Contactless compression Compact design Inlet and outlet silencers Sealed bearings eliminate the need for lubrication Vibration damper for horizontal installation Additional cooler Advantages Precise flow rate through speed control Low operating and exhaust gas temperatures Quiet operation Specifications VASF 2.50/2-0.AC230 Flow rate: 24 m³/h Relative pressure: +560 mbar Inverter power: 0.65 kW Hz: 50–300 Hz Sound level: 61 dB(A) Weight: 12.3 kg with motor and inverter Nwodpfxoyk Dkmj Ab Uel Find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2007, condition: used, Record Scorpion MEC. SP. Compact good condition flow packer. Key features - New condition - Very compact compared to most other flowpackers, Only ±290 cm long, very easy to integrate. Nwjdpfx Aomymi Tob Usl - Bottom seal - Very easy to set-up and run Optionally with additional infeed device.

Condition: used, machine/vehicle number: LC540, Used aseptic filling line Tetra Pak A3 FLEX V150 200S up to 7000 l/hThe Used aseptic filling line Tetra Pak A3 FLEX V150 200S up to 7000 l/h provides an advanced solution for the aseptic bottling of dairy products and fruit juices. Consequently, this line fills 200 ml Slim Brick containers, ensuring high production efficiency and maintaining the sterility of the product throughout the entire packaging process.Line Features of the Used aseptic filling line Tetra Pak A3 FLEXThe bottling line operates with a capacity of up to 7000 liters per hour, ensuring high standards of safety and quality. Furthermore, the aseptic system prevents bacterial contamination, making this solution ideal for packaging sensitive liquids. Additionally, the line includes a conveyor system that facilitates the smooth transfer of containers between different processing stages, ensuring an uninterrupted workflow.Machines Included in the LineTetra Pak A3 FLEX V150 200 ml Slim Filler (year 2006)The Used aseptic filling line Tetra Pak A3 FLEX relies on the Tetra Pak A3 FLEX filler, which aseptically fills 200 ml Slim containers. Moreover, this machine utilizes an advanced sterilization system to guarantee the microbiological safety of the packaged product. The filling process ensures precision, thereby minimizing waste and maintaining accurate dosing.Tetra Pak Straw Applicator 22 (year 2009)The Tetra Pak Straw Applicator 22 automatically affixes straws to 200 ml Brick containers. As a result, its integration into the production line enables precise and fast application, improving the product’s ergonomics for the end consumer.Flow Management and Buffering: Tetra Pak Accumulator ACHX30-0500-47M (year 2010)The ACHX30-0500-47M accumulator optimizes production flow by regulating container transport between different processing stages. In addition, this component ensures a continuous workflow, preventing interruptions and maintaining a consistent production rate even when downstream machinery operates at variable speeds.Tetra Pak Cardboard Packer 70 (year 2003)The Tetra Pak Cardboard Packer 70 packages Brick containers into transport cartons. Consequently, the automated system enables fast and efficient packaging, protecting units during transportation and facilitating distribution logistics.Aseptic Filling Process in the Used aseptic filling line Tetra Pak A3 FLEXThe entire system performs aseptic filling, a technology that maintains product sterility without requiring refrigeration. Specifically, the process sterilizes the container before filling, preventing bacterial contamination and ensuring an extended shelf life.Safety and ComplianceThe Used aseptic filling line Tetra Pak A3 FLEX incorporates advanced safety systems to protect both operators and the product during processing. Additionally, each machine complies with the sanitary and hygiene regulations required by the food industry, ensuring safe production in line with international standards.Conclusion of the Used aseptic filling line Tetra Pak A3 FLEXThis aseptic bottling line serves as an ideal solution for large-scale production of dairy products and fruit juices. Given its capacity of 7000 l/h, it delivers high levels of efficiency, quality, and safety. Moreover, the state-of-the-art Tetra Pak machinery ensures a reliable process, minimizing waste... Nodpszfzh Refx Ab Uewl

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Max. working pressure: 9,5 Bar Power: 100Hp / 75KW Nsdpfx Absuf Nibo Uswl 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Flow rate: 890 m3/hour. Three-phase 380V 3000 rpm Weight: 1200 kgs.

Year of construction: 2023, condition: excellent (used), Flowtech Flowboost 2V JH1 water pump system with tank Nwodpfxsuliano Ab Uol 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 345 mm, total width: 180 mm, total length: 470 mm, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 12 months, type of cooling: air, hose package length: 4,000 mm, electrical fuse: 12 A, welding current at 60% duty cycle: 220 A, protection type (IP code): IP23, Equipment: documentation/manual, type plate available, MICRO-IMPULSE WELDING UNIT MICROSPOT FOR MOLD REPAIR Fully digital: The completely digital welding current source MICRO SPOT allows for almost completely unrestricted shaping of the weld pulse in the millisecond range when setting parameters. Fully functional: The MICRO SPOT is not only the first and only repair welding unit with digital pulse shaping, it is also one of the most advanced digital power sources for: - TIG DC welding (2-stroke or 4-stroke) - TIG AC welding (2-stroke or 4-stroke) Nwjdpfx Ajxzrv Rsb Uel - TIG AC welding (2-stroke or 4-stroke) with automatic ball formation - MMA DC+ welding - MMA DC- welding - MMA AC welding Fully creative: Depending on the task and material, the “Creative Pulse Modulation” allows influence over the weld pool by means of oscillation superposition, soft or steep pulse rise, gentle pulse fade-out or abrupt pulse cut-off, etc. Fully intelligent: - Anti-stick function - Automatic post-flow gas (weld current dependent) - Automatic ball formation - Touch or HF ignition - Digital welding process control - Energy-saving inverter technology - Earth fault monitoring - Remote controllable via foot switch or torch - Gas test function - Generator-compatible - Job mode and job editing - Microprocessor control - Polarity reversal and RPI ignition - Welding current flow signal - Flow monitor for torch cooling - Temperature-controlled fan - Overtemperature protection Technical data: Mains voltage: 230 V Welding current: TIG: 3 – 220 A Electrode: 3 – 180 A Dimensions LxWxH mm: 470/180/345 Weight: 16.5 kg Protection class: IP 23

Condition: good (used), Year of construction: 2007, For sale full packing system, Nodpek R T Uvsfx Ab Uowl Multihead ( 10 scales) Packing machine Conveyor for packaged products.

Condition: ready for operation (used), functionality: fully functional, USED PULSED INVERTER WIRE WELDER, 400 Amps, MIGATRONIC BDH 400, refurbished like new. Nsdpfxszxwzyo Ab Uewl

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Njdez Abkyopfx Ab Ujwl

Condition: used, functionality: fully functional, conveyor belt length: 3,070 mm, conveyor belt width: 400 mm, Equipment: type plate available, Belt conveyor / conveyor belt / band conveyor Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt, SFT/P50 Total length: approx. 3070 mm Total width including motor: approx. 570 mm Total width without motor: approx. 430 mm Conveyor width / belt width: approx. 400 mm Belt type: smooth Material: steel Frame height: approx. 50 mm Including motor: 0.25 kW Including frequency inverter: TFR 600 HG Including 2 adjustable feet Internal article number: 2026051502 Conveyor technology – reliable and ready for immediate use – The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Nwedpeza Dz Djfx Ab Uol Features: • Condition: fully functional, with typical signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and securely packaged for transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Craft industry • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking shelves or container solutions.

Condition: used, functionality: fully functional, conveyor belt length: 2,060 mm, conveyor belt width: 300 mm, Equipment: type plate available, Belt conveyor/conveyor belt/transport belt Manufacturer: Schunk Fördertechnik GmbH Nsdpfx Aeza Drisb Ujwl Condition: used Model: Belt Overall length: approx. 2060 mm Overall width including motor: approx. 530 mm Overall width without motor: approx. 320 mm Conveyor width/belt width: approx. 300 mm Material: Steel/aluminum Frame height: approx. 50 mm Including motor: 0.25 KW Including frequency inverter: 0.37 KW Including 2 adjustable feet Internal article number: 2026051501 Conveyor technology – reliable and ready for immediate use - The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of wear • Ideal for efficient and rapid material transport • Professionally dismantled and packed for safe transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Craft trades • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking racks or container solutions.

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input current: 105 A, input frequency: 50 Hz, continuous power: 55 kW (74.78 HP), Complete designation: Nedpfx Abszuzruj Ujwl NXP01055-A2H1SSS-A1A300000 +QGLM+FL23*DPAP+DLDE Input: Uin: 3~380-500V, 50/60Hz, 105A, 40°C Output: 3~0-UIn, 0-320Hz, 105A, 40°C Power: 55kW: 400Vac / 90HP (Ref.): 480Vac Complete documentation included This frequency inverter comes from a warehouse clearance and has never been put into operation.

Condition: used, machine/vehicle number: LC596, Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labelerConveying/accumulation: MBF accumulation table (conveyor)Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizerCase handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserterAuxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scaleSelected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30)Certifications: CE markings on Mas Pack modulesAdvanced Automation & Control SystemsThe line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families.Adhesive labeling with 3-station control for front/back/neck labelsAutomated heat-shrink and polylaminate capsule applicationHotmelt application via PREO E0P051 4R2 unitsCE-compliant electrical panels on Mas Pack packaging modulesOperator-friendly HMI/controls at packaging stations (per module)Production Line Integration CapabilitiesDesigned for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy.Inline glass bottle processing from filtration to palletizingFo.. Nodjyhbhqspfx Ab Uswl

Condition: used, Year of construction: 2003, machine/vehicle number: LC632, Used KRONES spirits filling line, roud glass 36.000 BPH - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filingBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logilook label inspection (2015), Krones Kettner Wrapapac W60 (wraparound case packer), Krones/Kettner Robogrip robot, Krones Multidivider laner, Amberflex spiral case elevator, Linx 7900 bottle coder (2017), Orwak 9020 waste compactor (2006)Case formats: Wraparound boxes, 6 & 12 pack configurationsMain build year: 2003 (with upgrades in 2006, 2015, and 2017)Electrical supply: 415 V, 50 Hz (most main equipment); auxiliary devices at 240 V, 50 HzAdvanced Automation & Control SystemsThe line integrates automated material handling and inspection to ensure stable operation and quality assurance. The Krones Multidivider laner and Robogrip robotic handling enhance flow balance and downstream palletizing, while the Logilook system provides label presence and position verification. Changeovers between compatible glass formats are supported by standardized Krones change parts and adjustable guide-rails for efficient setup.Automated depalletizing, lane division, and robotic case handlingInline label inspection for consistent presentationOperator HMI terminals at key stations (typical Krones layout)Rapid format adjustments for 0.7L, 0.75L, and 1.0LStable 50 Hz operation; widely supported industrial componentsProduction Line Integration CapabilitiesThis used bottling line is designed for seamless in-line operation from bottle depalletizing to case packing. It accommodates round glass bottles and integrates labeling, coding, and inspection for end-to-end quality control. The wraparound case packer enables efficient secondary packaging for 6- and 12-pack configurations, ensuring compatibility with standard palletizing patterns.End-to-end flow: depalletizer → rinser → isobaric filler → capper → cold glue labeller → label check → coder → laner → case packer → spiral case elevator → palletizing robotSuitable for beverage production requiring glass bottle processingModular stations allow standalone testing or full inline operationMachine Condition & Maintenance HistoryManufactured in 2003 with subsequent upgrades in 2006 (waste handling), 2015 (label inspecti... Nedpfxjy Ud Alo Ab Uowl

Condition: used, Year of construction: 2006, machine/vehicle number: LC564, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Nsdpfew Ahfyjx Ab Uswl Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. T...