Used Karl Klink Rish 16.1000.630 for sale (448)

Condition: used, mileage: 31,615 km, power: 382 kW (519.37 HP), first registration: 08/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Trailer tipping hydraulics, driver's comfort seat with air suspension and lumbar support, shoulder adjustment and heating, construction site package, EBS, full brake assist, immobilizer, MAN TipMatic Manoeuvre - maneuvering mode, LED lighting, ASR, emergency brake assist, lane departure warning, trailer coupling Ringfeder type RF50 A, MAN Mediasystem Advanced 7'', without navigation map, RIO BOX, smartphone integration, tipping body 4,900mm x 2,380mm Meiller type D316, lashing eyes retractable in the floor plate, side wall height 900mm, front wall height 1,100mm, 350mm guide plate on front wall, steps on front wall, fixed corner stanchions, rear wall height 900mm, swinging rear wall, 150mm discharge chute on tipping body, axial pump tipping hydraulics Meiller type 275/1 PTO gearbox-dependent, Dosing device for rear wall tipping bridge, hydraulic connection at the rear Hedpfxjucizls Akzjn

Condition: new, messurements (LxWxH): 0,80 x 0,85 x 1,20weight approx.: 0,610total power requirements: 4sheet thickness: 6Details: Hydraulic drive, 6 mm at 90° (fixed) Blade length: 200 mm Hedpfjd Ab Icex Akzsn Notching angle: 90°

Condition: used, mileage: 6,146 km, power: 382 kW (519.37 HP), first registration: 08/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Re-registered to GSS 19.12.24 Driver comfort seat with air suspension, lumbar support, shoulder adjustment and heating, construction site package, EBS, full brake assistant, roll-away lock, MAN TipMatic Manoeuvre - manoeuvring mode, LED lighting, ASR, emergency brake assistant, lane departure warning system, trailer coupling ring spring type RF50 A, MAN Mediasystem Advanced 7'', without navigation map, RIO BOX, smartphone integration, tipper body 4.900mm x 2,380mm Meiller type D316, lashing eyes retractable in floor panel, height side drop side 900mm, height front drop side 1,100 mm, 350mm guide plate on front wall, steps on front wall, fixed corner posts, height rear wall 900mm, rear wall swinging, 150mm dumping chute on tipper body, axial pump tipping hydraulics Meiller type 275/1 power take-off gearbox abh. Hodpeuyrnlsfx Akzsn

Condition: used, mileage: 24,749 km, power: 382 kW (519.37 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Roll tarpaulin, trailer tipping hydraulics, air-suspended driver's comfort seat with lumbar support, adjustable shoulder section, and heating, construction site package, EBS, full brake assist, roll-away protection, MAN TipMatic Manoeuvre - shunting mode, LED lighting, ASR (traction control), emergency brake assist, lane departure warning system, Ringfeder type RF50 A trailer coupling, MAN Media System Advanced 7'' (without navigation card), RIO BOX, smartphone integration, tipping platform 4,900 mm x 2,380 mm Meiller type D316, recessed lashing eyes in floor plate, sideboard height 900 mm, front wall height 1,100 mm, 350 mm deflector plate on front wall, access steps on front wall, fixed corner stanchions, tailgate height 900 mm, tailgate swinging, 150 mm discharge chute on tipping platform, axial pump for tipping hydraulics Meiller type 275/1, gearbox-dependent PTO, Meiller roll tarpaulin. Hodjuciyzspfx Akzon

Condition: new, messurements (LxWxH): 1,10 x 1,15 x 1.40weight approx.: 1,150total power requirements: 4sheet thickness: 6 mm Details: - Hydraulic drive Hodpsd Ab Idefx Akzjn - Blade length: 200 mm - Adjustable angle: 60° - 140°, 6 mm - Adjustable angle: 30° - 59°, 4 mm

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: blue, driver cabin: other, gearing type: other, loading space length: 5,200 mm, loading space width: 2,300 mm, loading space height: 1,300 mm, Year of construction: 2006, Vehicle location: Bovenden, steel body, on-board control on the left Hedpfxei Rrm As Akzjn Structure: on-board control on the left, space for loading crane at the rear - Meiller 2-S body - suitable cranes in stock Surcharge for e.g. L-crane 8000 -20,000 EURO!! Dismantling of MAN 26.430 6x6 with 3900mm wheelbase ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, Year of construction: 2026, Cross splitting wedge for 16-ton log splitters Hodpfx Asycu T Askzen Allows logs to be split into 4 parts. It features a universal mounting system compatible with most wood log splitters available on the market. Thanks to its universal mounting design, it fits the majority of commercially available log splitters. Manufacturer: Cormak

Condition: new, Year of construction: 2026, Cross splitting wedge for 14-ton log splitters Allows logs to be split into 4 parts. It features a universal mounting system compatible with most wood log splitters available on the market. Thanks to its universal mounting design, it fits the majority of commercially available log splitters. Manufacturer: Cormak Hjdpfx Aksycu R Uszon

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch Hodpfxofdkgyj Akzen -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

Condition: used, Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool Hodpfx Akecwn Hfozen -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Condition: used, Triangular notching tool, notching side knife, die holder, parting tool, punching tool, punch, punching die, punching die Hjdpfx Akjcwn Eyszon -Punching Tool: Angle Notching Tool -Remark: only counter knife, without release unit -Dimensions: 185/172/H95 mm -Weight: 9.3kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punching die, punching punch, Hjdoc Nlyyopfx Akzjn -Punching tool punch die with stripper -Punching dimensions: 15 x 60 mm square -Dimensions: 170/145/H235 mm -Weight: 14 kg

Condition: new, empty load weight: 514 kg, maximum load weight: 786 kg, overall weight: 1,300 kg, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: white, construction height: 2,450 mm, working width: 2,010 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, rear door can also be opened/locked from the inside incl. door handle with plywood superstructure 15mm roof/walls, braked, 6 lashing eyes, * IMMEDIATELY AVAILABLE * Rear door can also be opened/locked from the inside incl. door handle with plywood superstructure 15mm roof/walls, braked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1300kg - Unladen weight: 514 kg - Payload: 786 kg - Interior dimensions: 304 x 151 x 180 cm (L x W x H) - Overall exterior dimensions: 435 x 201 x 245 cm (L x W x H) - Loading sill height: 59 cm - Tires: 195/65R15 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen-printed board 15mm - Walls: 15mm multi-layer wood, plastic-coated - Roof material: 15mm multi-layer wood, plastic-coated - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (400kg/daN) - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: - - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 140x175cm - Interior light: yes, with switch - Supports: at an extra charge - Overrun equipment & brakes: yes - 100km/h: incl. vehicle documents Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized - ALKO overrun device - 15 mm thick base plate - side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - interior light mounted - 2-leaf rear doors - doors with special sealing profiles, made of hard/soft plastic - lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - jockey wheel - automatic reversing system - plastic mudguards - 13-pin plug - reversing light - large rear lights - rear lighting - COC approval: yes. plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers SPECIAL CONSTRUCTION: - Rear door can be opened from the inside and outside and is lockable! - Door handle at the rear with 3-point lock Accessories can be retrofitted - please enquire: - Anti-theft device - Rear supports - 100km/H approval with wheel bumper - Side door - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-hole rails for tension belts & locking beams - Rod strip with rubber coating for tension belts & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hjdpfx Akou Htidozsn

Condition: used, mileage: 1,08,430 km, power: 310 kW (421.48 HP), first registration: 02/2021, fuel type: diesel, empty load weight: 14,730 kg, maximum load weight: 17,270 kg, overall weight: 32,000 kg, tire size: 13R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. Features: ClassicSpace cab, Mercedes PowerShift 3, steel body, designated as a house vehicle, air-sprung driver's seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, radio, cruise control, ABS (Anti-lock Braking System), traction control (ASR), constant throttle, PTO (power take-off), front exhaust, differential lock, leaf suspension, Bordmatik on the left side, 2nd axle steered (leading axle), folding underrun protection, chute, roof hatch, green environmental badge. Wheelbase: 4550 mm. Body: Meiller 3-way tipper with left-side Bordmatik, installed in 2019. Front axle: 8t, rear axle: planetary gearset 13.4t with 300 crown wheel. Electronic braking system with ABS and ASR, disc brakes with full protection on both front and rear axles, ABS switchable, stabilizer on front and rear axles, smoker package, construction site filter, reversing warning system, ClassicSpace cab, Parameterizable Special Module (PSM), daytime running lights, engine brake, bumper underrun protection plate, cyclone pre-filter, transmission oil cooling, offroad drive program, Mercedes PowerShift 3, tank capacity: 290l, MB 131-2c PTO pump. Technically permitted total weight: 41,000 kg! Tipper floor: 6mm VS120, sidewalls: 4mm VS100. Hodpsw Hdthofx Akzsn Multiple vehicles available from 2021/2022 with mileages between 89,000 km and 108,000 km! Crane available for surcharge – Reference No. 9079 – grab bucket also available for surcharge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, mileage: 2,64,166 km, power: 300 kW (407.89 HP), first registration: 09/2009, fuel type: diesel, empty load weight: 15,650 kg, maximum load weight: 10,350 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, brakes: constant throttle, color: black, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 4,600 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, steel body, integrated cab, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, Telligent gear shift, 16-speed manual transmission, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, fog lights, rotating beacon, storage box, leaf suspension, Bordmatik on the left, trailer coupling with air, light, and hydraulics, low-noise G1, underrun protection, roof hatch, rear-mounted crane, emergency stop, grab control, elevated seat, 2-point hydraulic support, 1x hydraulic extension, green environmental badge. Hjdox Avk Iopfx Akzon Wheelbase: 3300 mm. Body: Meiller two-way tipper body with Bordmatik (left) and rear crane Penz 10.83SH with elevated seat. 7.5t front axle, rear axle H7 13t, 300 ring gear, Telligent brake system with ABS and ASR, ABS can be deactivated, disc brakes with full protection at front and rear axles, rear axle stabilizer, steel bumper, PSM, prepared for toll recording, illuminated Mercedes star, distribution cockpit, refrigerator box, reinforced clutch, Telligent Shift II, Webasto Thermo Top 90 auxiliary hot water heater, jobsite filter, On-Board Diagnostics 2, protective plate under radiator and engine, increased engine cooling performance, gearbox oil cooling, MB 124-10c MPA power take-off with N/M speed. Load diagram: 4m – 2,600 kg, 6m – 1,800 kg, 8m – 1,300 kg! Grab available at extra cost! VIN: WDB9321611L441438! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to alterations, prior sale, and errors excepted.

Condition: used, mileage: 5,44,000 km, power: 279 kW (379.33 HP), first registration: 12/2004, fuel type: diesel, empty load weight: 12,600 kg, maximum load weight: 13,400 kg, overall weight: 26,000 kg, axle configuration: 6x4, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Belgium 1, steel superstructure, Mtlg. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, cruise control, switch 16, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off, raised exhaust, differential lock, fog lights, rotating beacon, leaf suspension, on-board suspension left, air+light trailer hitch, low-noise G1, flap, doors, U-protection, aluminum side skid plates, roof hatch, environmental badge yellow, yellow environmental badge, environmental badge for the vehicle. Aluminum side guards, roof hatch, yellow environmental sticker Body: 3-sided tipper body with Bordmatik left and combination flap (hinged door/flap) Current location: Company Ronny Schoutteet bvba, Brugsesteenweg 213 in 8460 Oudenburg, Belgium! Tel: All information without guarantee as the vehicle is in the inflow! ACCESSORY INFORMATION WITHOUT WARRANTY, changes, prior sale and errors excepted! Hsdpfovhmqajx Akzjn - .

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Hedpotwm Ubjfx Akzsn Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Condition: used, Year of construction: 2011, machine/vehicle number: 1799-250034, The KUKA KRC2 / KR 60L30-3 robot was used for the automatic removal of components from a Kaltenbach KF 1606 flame cutting machine with a Remmert storage system. The KUKA KR60L30-3 robot with the associated control cabinet and controller is currently for sale. The Remmert storage system and the longitudinal traversing rail are no longer available. Hsdpfx Aeyilcrekzen

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Hjdpfxeywtqdj Akzsn Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Klinkenberg bag compactor / sack densifier Empty bags are reduced by up to 10 times Motor power: 4kW Fully refurbished and coated See our other listings VMA Wekerom Hsdpfx Aksyf A Exezen

Condition: used, Year of construction: 2008, operating hours: 6,848 h, functionality: fully functional, machine/vehicle number: 11580008023, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, total height: 2,260 mm, total length: 22,950 mm, total width: 2,100 mm, table width: 600 mm, table length: 1,000 mm, table load: 200 kg, rotary table diameter: 600 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 24, tool length: 315 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Deckel Maho DMU 60 is a universal 5-axis CNC machining center designed for precise milling and complete machining of complex components. This machine is part of the renowned DMU series by DMG Mori (formerly Deckel Maho) and is widely used in toolmaking, mechanical engineering, mold making, as well as the aerospace industry. Thanks to the swiveling milling head (B-axis) and NC rotary table (C-axis), workpieces can be machined on five axes, enabling the production of complex geometries in a single setup. Previous application conditions: Hsdpfsyt Ibnsx Akzjn General machine/tool parts in steel, aluminum, cast iron, etc. Heidenhain iTNC 530 control HSK-A 63 tool holder The stated price is exclusive of dismantling, packaging, and shipping. Sale is from location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 Hjdeyt E Nvspfx Akzjn The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: 2.1902.01, table length: 7,000 mm, feed rate X-axis: 30 m/min, planing height: 6,900 mm, table width: 1,800 mm, The Waldrich Coburg 7DS4039 is a heavy-duty gantry or double-column planing and grinding machine (planer-type milling machine) designed for machining large and heavy workpieces. Machines from this manufacturer are primarily used in large-scale machinery construction, turbine manufacturing, printing machine production, as well as tool and die making. This machine features a robust portal design, high rigidity, and spacious working areas, making it particularly suitable for roughing and finishing operations on large steel or cast constructions. Waldrich-Coburg machines are renowned for their high precision and long service life in heavy-duty machining. Workpiece weight: 15–30 tons The quoted price does not include dismantling, packaging, or shipping. Sale from site; subject to prior sale. The machines are sold in used condition; any warranty or guarantee is excluded. Hodoyt Ey Uspfx Akzen

Condition: used, Year of construction: 2013, operating hours: 18,995 h, functionality: fully functional, machine/vehicle number: VH-20053, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: mittig, spindle speed (max.): 3,500 rpm, spindle speed (min.): 50 rpm, table width: 1,050 mm, table load: 5,000 kg, table length: 2,100 mm, table height: 860 mm, total height: 3,500 mm, total width: 4,485 mm, total length: 5,550 mm, type of input current: AC, workpiece weight (max.): 5,000 kg, overall weight: 11,000 kg, control cabinet width: 600 mm, power: 25 kW (33.99 HP), control cabinet length: 1,275 mm, control cabinet height: 2,370 mm, Equipment: rotational speed infinitely variable, For sale is an MTE BF-2000 CNC bed-type milling machine, year of manufacture 2013, in very good condition with comparatively low hours of use. The machine is ideal for precise and heavy machining operations in mechanical and tool engineering. Thanks to its rigid bed construction and powerful spindle, large and heavy workpieces can also be machined reliably. The machine is well maintained, fully functional, and can be inspected by appointment. Further technical data and accessories are available on request. Hodoytqdrspfx Akzen Control: Siemens 840D SL Spindle taper: SK50 (DIN69871) The quoted price is exclusive of dismantling, packaging, and shipping. Sale ex works; subject to prior sale. Machines are sold in used condition; any guarantee and warranty are excluded.

Condition: used, Year of construction: 1993, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,330 Nm, controller manufacturer: Siemens, controller model: Siemens 840D, total height: 5,800 mm, total length: 14,000 mm, total width: 4,000 mm, table width: 2,000 mm, table height: 250 mm, table length: 2,000 mm, table load: 20,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 2,500 rpm, overall weight: 40,000 kg, spindle speed (min.): 2 rpm, spindle speed (max.): 2,500 rpm, spindle motor power: 36,000 W, number of slots in tool magazine: 60, input voltage: 380 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The Lazzati HB130 is a heavy-duty CNC horizontal boring and milling machine from the Italian manufacturer Lazzati. Machines of this series are primarily used in large-scale machinery construction, turbine production, energy plant engineering, as well as in tool and mold making. This machine is designed for machining large and heavy workpieces, allowing for precise drilling, milling, and tapping operations on massive steel or cast components. It features a particularly robust construction with hydrostatic guides, ensuring high rigidity and accuracy during heavy-duty machining tasks. Spindle taper DIN69871 ISO 50 Hodpfeytrm Iex Akzsn Milling spindle taper ISO 60 The listed price is exclusive of dismantling, packaging, and shipping. Sale ex location; subject to prior sale. Machines are sold as used; any warranty or guarantee is excluded.