Used Kolbus Fs.t (2004) for sale (1,149)

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Lhjdpfxet Rmhao Abyjh Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 33-010, 16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system. Lhsdpfx Ajh T Dhqsbysh

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The system consists of the following components: Perfect Binder KM 410.C – 24 clamps Gathering Machine ZU 840.B 2 cutting stations Robatech premelters XRT 951 and 950 / ICS 160 Transport and cooling belt AK-6365-02 Three-knife trimmer HD 151.P Müller Martini stacker Note: 6 trucks are required for transport. Ledpfx Asxvyhdsbyohh

Condition: used, Year of construction: 2005, Three knife trimmer Lodpfxjvf Dtys Abyjhh Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting Lhjdpfx Absx Ary Eoysh - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2023, functionality: fully functional, total height: 1,800 mm, input voltage: 400 V, total width: 2,830 mm, total length: 2,300 mm, overall weight: 2,500 kg, working width: 1,950 mm, operating pressure: 6 bar, Equipment: documentation/manual, Kolbus Autobox BX200 with Magazine Feeder Boxmaker for producing customized folding cartons Magazine feeder for automatic sheet infeed Fully automatic setup via touchscreen Processes corrugated board up to a maximum of 10 mm Slotting knife width: 7 mm Remote service enabled Lodjyaa Rnjpfx Abyohh DEMO machine – LIKE NEW!

Condition: refurbished (used), Year of construction: 1961, We are selling an operating Casing in Line from the Berlin location. This consists of a casing-in machine built in 1961 and a pressing unit built in 1973. An extensive modernisation took place in 2021/2022. The drive of the machine and the safety equipment were renewed. The machine can be inspected at any time. Speed 500-800 pcs/h depending on personnel. Lhedpfxon Nv Sds Abyoh

Condition: reconditioned (used), Year of construction: 2006, Casemaker - device for processing center strip rolls Lhjdpfx Abev Uh Nkeyjh - processing hot-glue - viscosity control device - board center strip magazine - board cutting device PS - device for producing quarter-bound cases in 2 passes - device for processing of asymmetric cases

Condition: reconditioned (used), Year of construction: 2018, Gathering Elements (=3 stations) Lhodpfx Absvrca Ssyeh for elongation of an existing perfect binding line or solo gathering machine

Condition: good (used), Year of construction: 2019, functionality: fully functional, The Kolbus AB300 is a fully automatic, modular machine for the production of corrugated cardboard boxes, capable of manufacturing a variety of box styles (such as 0201, tray, wrap, and pallet boxes). Key specifications include a maximum speed of up to 100 m/min, fully automatic setup via touchscreen, a maximum blank width of 2590 mm (102 inches) with unlimited length, and the capability to produce over 100 different box styles. The machine offers high flexibility, allowing for rapid changeovers between different sizes and styles. Technical Specifications - Maximum speed: up to 100 m/min - Widths: from 100 mm to 2590 mm (102 inches) - Length: Unlimited Lhodoxpga Topfx Abysh - Box types: Over 100 different styles, including 0201, wraps, pallet boxes, and partitions - Control: Fully automatic setup via touchscreen - Energy efficiency: Up to 75% energy savings compared to conventional machines - Material: Suitable for all types of corrugated board

Condition: used, Year of construction: 2004, operating hours: 1,53,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Lhedozggguepfx Abysh Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2004, Horizon BQ-270 Single-Clamp Perfect Binder, used Experience efficient and precise bookbinding with the Horizon BQ-270. This fully automatic perfect binder offers easy operation, high speed, and versatile applications for your book production. Key Features: - Fully automatic settings for quick setup - User-friendly touchscreen for easy operation - High productivity with up to 500 books per hour - Precise binding with even glue distribution - Versatile format handling for different book sizes and thicknesses - Compact design for space-saving integration - Quick format change for efficient production Specifications: - Book format: max. 320 x 310 mm; min. 135 x 115 mm - Cover format: max. 660 x 320 mm; min. 240 x 135 mm - Book thickness: max. 50 mm; min. 1 mm - Cover weight: 90 - 300 g/sqm - Cover pile height: max. 70 mm - Production speed: up to 500 cycles/h - Dimensions: 2,720 x 910 x 1,545 mm - Power: 400V; 50Hz - 2.7 kW - Weight: 900 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Lhedpsy Ec Egofx Abysh Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Year of construction: 1991, The BISON 2004 P electric forklift is a compact and robust electric forklift designed for internal material handling. With a load capacity of up to 2,000 kg, the machine is suitable for use in warehouses, production facilities, and loading areas. Technical data Working width / center of gravity (COG): 1,000 mm Lhedpjzf Euzofx Abyeh Load capacity: Rated load capacity: 2,000 kg at a load center of 500 mm Residual load capacity: 2,000 kg at a load center of 500 mm Mast: H25V Maximum lifting height: 3,525 mm Unladen weight (without battery): 2,400 kg Minimum battery weight: 780 kg Battery voltage: 48 V Machine description The BISON 2004 P impresses with its robust design and proven electrical technology. With a lifting height of 3,525 mm and a load capacity of 2 tons, this forklift is ideal for handling pallets, wood-based materials, machine components, and other heavy goods. The emission-free electric drive allows it to be used in enclosed halls and production environments.

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ledpeymqz Rjfx Abyohh

Condition: used, Year of construction: 2004, operating hours: 1,45,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Ledpey U Hh Djfx Abyshh Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2004, machine/vehicle number: FA57, Used Shrink Wrapper MIMI – Overview This used MIMI shrink wrapper is engineered for grouping and overwrapping PET bottles into stable retail-ready bundles on a modern bottling line. Designed for industrial packaging and beverage production, it delivers dependable second hand performance with efficient film-only bundling. The machine is configured for straight infeed handling of round bottles and supports multiple pack patterns without cardboard backing, making it a versatile choice for high-throughput packaging operations. Built for continuous-duty operation, this shrink wrapper is well-suited to integrate into existing bottling equipment and packaging machinery. It is a strong fit for beverage production environments where consistent pack quality, format flexibility, and reliable throughput are essential. With compatibility for common PET bottle sizes and standard pack matrices (3×2, 2×4, 3×4), it helps reduce material consumption by eliminating trays or pads while maintaining pack stability after heat shrinking. Technical Specifications & Performance Data Manufacturer: MIMI Machine type: Shrink Wrapper Year of manufacture: 2004 Capacity: up to 6,000 bottles/hour or 100 packs/hour (depending on pack configuration) Bottle sizes supported: 0.33L, 0.5L, 1.0L, 1.5L Container types: PET bottles Pack configurations: 3×2, 2×4, 3×4 (trayless, no cardboard backing) Infeed orientation: Straight infeed for round bottles Advanced Automation & Control Systems The machine is designed for inline, conveyor-fed operation typical of automatic shrink wrapping systems. Standard industrial protections and operator interfaces support routine adjustments and format changes. Exact PLC/HMI, electrical ratings, and power data are not specified in the available documentation. Production Line Integration Capabilities This shrink wrapper integrates smoothly with upstream and downstream bottling equipment, including conveyors from fillers, labelers, and pack conveyors to palletizing. The straight infeed accommodates round PET bottles and allows quick transitions between pack matrices. Its trayless film bundling reduces material handling and simplifies logistics while maintaining pack integrity after the shrink tunnel. Ljdpfx Absxurm Aeyjhh Machine Condition & Maintenance History The machine was removed from service in 2019 and is currently not in active production. It is offered as a second hand unit suitable for recommissioning. Specific maintenance logs and operating hours are not provided in the available documentation. Operational Performance & Versatility Optimized for PET bottles, this shrink wrapper covers the most common beverage bottle sizes from 0.33L through 1.5L. Its ability to produce 3×2, 2×4, and 3×4 bundles without cardboard backing supports cost-efficient industrial packaging while preserving good pack stability following shrinking. The straight infeed for round bottles enhances handling reliability and reduces changeover complexity. Installation Requirements & Site Preparation As with most shrink wrappers, installation typically requires a stable, level foundation, adequate f...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below Lhedjvnv Tqopfx Abyoh 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below Ledpfx Asvu Hgbjbyehh 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, Year of construction: 2004, Speed 60 m/min Capacity 260/150 mm Tool holder diameter 50 mm Composition: Lower spindle sander 15kW Lhjdpjzc Nb Iofx Abysh Planer straight 11 kW Gauche planer 11 kW Top planer 15 kW Planer straight 11 kW Gluing left? Wait: 'Raboteuse gauche 11 kW' in French means 'Left planer 11 kW'. Planer for top finishing 15kW Planer bottom finishing 11kw Drive power 11 kW 8 workstations Digital positioning Chrome table Counterplayers Lubrication 400 V

Condition: used, mileage: 1,455 km, color: orange, lifting height: 27,000 mm, Year of construction: 2004, operating hours: 1,455 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.200 kg CE mark: yes History Number of owners: 1 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Upper hours: 1455 h Production country: DE Additional information Lhjdjzb Iayjpfx Abyjh Please contact Michael Overmeer for more information Böcker AHK 27/1200 trailer crane construction year 2004 with only 1.455 hours from the first owner. Machine is in a nice condition and equipped with a Honda benzine engine and has among other things: first paint, hydraulic wheel drive, hydraulically support legs, remote control. Changes and typographical errors reserved.

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: Lhodpfx Aboyr Rm Rsyjh - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, Used Horizon VAC-60Hc Collator, used The Horizon VAC-60Hc is a powerful collator designed for efficient and reliable paper handling in professional print finishing environments. Key Features: Lodpjxgd Szefx Abyshh - Loading capacity: 130 mm per bin - Modular design: Tower with 6 feed stations, expandable up to 6 towers for a total of 36 stations - Suction and air-blow technology: Uses Horizon's advanced technology for consistent and reliable sheet feeding with various paper types and weights - Versatile paper processing: Handles sheets from 148 x 120 mm to 500 x 350 mm, with paper weights from 40 to 250 g/m² - High production speed: Up to 9,500 sets per hour, depending on paper size and configuration - User-friendly operation: Intuitive interface for easy job setup and control - Advanced error prevention: Equipped with miss-feed, double-feed, and jam detection for improved accuracy and reliability - Job memory: Ability to store recurring jobs for increased efficiency Technical Specifications: - Dimensions: 842 x 652 x 1,961 mm - Weight: 310 kg - Power supply: 230V, 50/60Hz - 1.86kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2004, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Weight: 21.500 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 12.2235 - Drive system: CNC - Control system brand: Delem - Power [kW]: 33.5 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 300 - Max. working width [mm]: 4300 Lhedpfx Asyvt Dzobyeh - Column gap [mm]: 3700 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) - Transport weight [kg]: 21500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, axle configuration: 3 axles, first registration: 12/2004, color: other, Year of construction: 2004, Empty weight: 8.280 kg Axle 1: left 5 mm right 5 mm Axle 2: left 5 mm right 5 mm Axle 3: left 5 mm right 5 mm Lodpfxowl D Sbo Abyehh

Condition: used, axle configuration: 3 axles, first registration: 02/2004, color: other, Year of construction: 2004, Empty weight: 6.700 kg Axle 1: left 6 mm right 6 mm Axle 2: left 4 mm right 4 mm Lhedpfx Ajygl Sqjbyjh Axle 3: left 6 mm right 6 mm