Stacking platform for panel saws Holzma (2004)

Holzma

Condition: used, Year of construction: 2008, cutting width (max.): 2,200 mm, controller model: POWERCONTROL, cutting length (max.): 4,300 mm, Equipment: scorer, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade overhang: 125 mm Maximum feed rate: 80 m/min Saw unit Maximum tool diameter, main saw: 450 mm Motor power, main saw: 13.5 kW Maximum tool diameter, scoring saw: 180 mm Motor power, scoring saw: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Lift table, number of levels: 4 Dsdpfx Asz Eklvsp Djwc Clamping system, clamping jaws: 10 EQUIPMENT Lift table Saw unit Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5552

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. Offer includes. 1. Weinig high speed 820 right angle moulder outfeed. 2. Weinig 811 moulder outfeed, scissors lift with pack chains 3. Weinig additional outfeed pack chains to transfer to a roller conveyor system. System of operation. Dwjdpfx Apoxftvaj Doc -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Dsdpfx Asy Hcd Ssp Dswc Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF Dwjdpfx Apjwuck Io Doc

Condition: excellent (used), Bruks 602 CS Drum Chipper - Inlet opening size: 540 x 300 mm - Drum diameter: 600 mm - Number of knives: 2 Dwodsxmbidopfx Ap Djc - Maximum wood thickness: 180/100 mm - Main motor power: 26 kW - Fan motor power: 11 kW - Capacity: up to 20 m³ of chips/hour - Standard chip length: 20-35 mm - Net weight: 1400 kg - Manufacturer: BRUKS (Sweden) Condition: tested, in working condition Conveyors are also available

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Dedpfox A Thksx Ap Dswc Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22

Condition: ready for operation (used), Year of construction: 2008, Holzma automatic panel saw PROFI HPP 510/56/56/P Year: 2008 Technical data Positioning accuracy +/- 0.1 mm Dodpfx Asz Iliujp Dewc 5 air cushion tables, 2,810 x 650 mm 1 fan, adjustable pressure Cutting length: 5,600 mm Cutting width (pusher travel): 5,600 mm 11 combination profile rails, dual-track 9 clamps, two-finger type Max. cutting height: 125 mm Saw carriage feed (forward): 0.1 – 150 m/min Saw carriage feed (return): constant 150 m/min Pusher feed (forward/return): max. 90 m/min 11 combination profile rails, dual-track Max. forward speed of 25 m/min is mandatory within the EU Automatic pressure beam height control Main saw motor (frequency-controlled): 21 kW Speed: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz (+10 / -5%) Connected load: 30 kW Working height: 1,020 mm Main saw blade: 450 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 – 5.8 x 45 mm Compressed air: 6 bar Air consumption: 210 NL/min (approx., at extraction port) 30 – 32 m/s Negative pressure: 1,200 Pa Extraction volume: 5,800 m³/h Chip duct connection: 1 x 200 mm Pressure beam connection: 2 x 150 mm Quality standards: CE tested, GS tested, FPH dust-tested. Stock no.: 2003040BX

Condition: used, Excavator Manufacturer:SENNEBOGEN Model: 730E M-HD 2018 year model with 27662mh Dedpfx Aow Iziujp Djwc ENGINE: CUMMINS engine QSB 6.7 - C225, 168kW/2000 rpm. Emissions according to US EPA Tier 4 final/EU stage IV, watercooled including electrically heated water separator with fuel prefilter 24V

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Dwjdjz Erw Hopfx Ap Dec Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: good (used), Year of construction: 2003, Maximum cutting Width : 4300 mm Maximum cutting Lenght : 4300 mm Maximum cutting hight : 95 mm Main engine : 13,5 Kw Scoring unit : 2,2 Kw Saw carridge feed rate : Variable 1 - 150 m/min Pusher feed rate : up to 90 m/min Control system : CADmatic 4.0 Dsdpoz Hx Egjfx Ap Dewc 4 x air table in front of the machine Machine is dismantled and ready to load

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers Djdjtmtf Repfx Ap Djwc - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Holzma Type: HPL 380 Year of manufacture: 2011 Dsdez Akcxspfx Ap Dowc Technical data Cutting length: 4,300 mm Cutting/lifting table width: 2,200 mm Max. panel size: approx. 4,300 - 2,200 mm Min. panel thickness: 9.5 mm Saw blade overhang: 95 mm Max. saw blade diameter: 380 mm Main saw motor: 13.5 kW Scoring motor: 2.2 kW Scorer Saw carriage feed rate: 1,150 m/min Program slider: up to 90 m/min Clamping jaws: 7 pieces Lifting table payload: up to approx. 4,000 kg Control system: HOLZMA CADMATIC 4.0 Total connection: approx. 28.7 kW Working height: approx. 920 mm Lifting table: 4-column lifting table Loading: from the rear Air cushion tables: depending on the configuration CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008001, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm Dedswuz Tbepfx Ap Djwc No of Grippers: 8

Condition: reconditioned (used), functionality: fully functional, Completely renovated Bruks BS 3 wood chip screen including stand Dodpfx Aowiw Tmjp Djwc

Condition: used, machine/vehicle number: 007470, Max. panel width: 3800 mm Max. panel length: 2200 mm Dwjdpfxst H Twas Ap Doc Main saw blade projection: 130 mm No of Grippers: 7