Used Linde L 10 // 1.165 Std. / Hh 1.550 Mm / 1.350 Mm Lange for sale (1,12,964)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Fsdpemhh Dhefx Ap Dopn Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Fpedomhhx Iepfx Ap Dsn - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Fodpfx Asmhh Anep Dspn - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, color: green, overall weight: 13,590 kg, maximum load weight: 12,000 kg, empty load weight: 1,590 kg, loading space volume: 10 m³, loading space width: 2,330 mm, loading space length: 5,500 mm, loading space height: 800 mm, Roll-off container, 10 cubic meters, with a two-wing rear door Internal dimensions L/W/H in mm: 5500/2330/800 Floor reinforced with a U-profile as a support profile Front wall trapezoidal up to the hook height Locking dimension according to DIN 3390 mm Color RAL 6018, yellowish-green 2 units in stock Fpsdpfx Asz Atdfep Don

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Fpjdpfx Apjmhhyas Don According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fpjdpfxomhh Dze Ap Don Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1000mm -Cross section: 120 x 40 mm -Recording: 500 mm (see sketch in the photos) -Transport dimensions: 1155/700/H120 mm Fsdegnzxuopfx Ap Depn -Weight: 132 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm Fpodpfxewv Ndqo Ap Djn -Total weight: 112 kg

Condition: good (used), Included in the scope of delivery: Fodpfxow Ryl To Ap Dopn 01x Light water hose Material: Polyvinyl chloride (PVC) Material color: black Diameter: 12.7 mm (1/2 inch) Length: 20 m Suitable for up to 200 psi (13.8 bar) Durable, 3-layer construction Weight: 2.60 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any transport or shipping of this item beyond pick-up is subject to additional costs, which can be inquired with us depending on the delivery location and scope of delivery.

Condition: used, Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1080mm -Cross section: 150 x 55 mm -Hole: Ø 50 mm, see photos -Dimensions each: 1180/150/H875 mm Fpedpfx Ajtvb D Hjp Don -Total weight: 120 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1600 mm Fpjdpjyzxalofx Ap Djn -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

Condition: used, axle configuration: 2 axles, first registration: 11/2024, Year of construction: 2024, EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. EuromixMTP 10 cbm mixing semi-trailer - New - 2-axle - SAF axles Fpedozfy Nyspfx Ap Den - 1x lift axle - air suspension ABS - Tires 385/65 R22.5 - Total weight approx. 36,000 kg - Tare weight approx. 7,640 kg - Separate motor EuromixMTP - Truck-mounted mixer body EM 10 L - lightweight design Model: EM 10 L Nominal volume 10m³ ready-mix concrete Mixing drum in lightweight construction Mixing drum in lightweight design made of HARDOX S450 material Mixing blades in lightweight design made of HARDOX S500 material Gearbox, manufacturer ZF P5300 Hydraulic pump, manufacturer Bosch Rexroth Hydraulic motor, manufacturer Bosch Rexroth Oil cooler system integrated Mixing control, mechanical and start/stop electric Compressed air water system Water connection on the platform with hose line Water filling line, on one side with C-coupling Mixing drum with one service hatch Ladder with platform Rubber insert on the filling funnel Swiveling, single-arm discharge chute made of steel Wear plates in filling funnel, discharge chute and swiveling chute Drum locking for securing the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety technology Fenders made of steel above the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500l (compressed air) Water tank steel Shut-off valve installed below the water tank in the filling line Water connection "C" coupling Operation & Electrics Mixer operation - mechanical at the rear Start-stop system (with EDC) Geometric volume 61 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Optional equipment: Extension chute plastic - steel - aluminum Folding chute plastic (or steel) Retaining flap swiveling chute Plastic box Dust box stainless steel Additive tank, unpressurized Additive pressure tank Trowel holder ¾ drum closure Rear view camera LED work light EuromixMTP Intelligent drum control (Electronic truck-mounted mixer control) Step on the underrun protection with handrail Water meter Pressure gauge Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Usable material: Concrete Value added tax / differential tax: Value added tax deductible Please contact Harun...

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table, welding fixture, circumferential seam welding machine -Manufacturer: Carl Cloos, Welding rotary device type CD 100 SR -Turning length: 1030 mm -Turntable: Ø 500 mm, tiltable -Peak height: 375 mm -Speed: electrically continuously variable 0-3.5 rpm -Control: via foot pedal -Burner stand: manually adjustable Fpodjz Hwzajpfx Ap Dsn -Tailstock: with pneumatically operated quill, 90 mm stroke -Transport dimensions: 2025/800/H1350 mm -Weight: 400 kg

Condition: good (used), Scope of delivery includes: 01x Impact protection guardrail, used Total width: approx. 2,610 mm (outer edge – outer edge footplate) Inner width: approx. 2,515 mm For double rack rows up to 2,500 mm Total height: approx. 400 mm Total depth: approx. 220 mm Weight | Guardrail: approx. 39.00 kg Consisting of: 02x L-shaped impact protection corners, used Material colour: yellow/black Total height: approx. 400 mm Total depth: approx. 305 mm Total width: approx. 265 mm Material thickness: approx. 4.00 mm 02x C-profiles, used Material colour: yellow Total length: 2,360 mm Fpjdpoxda Elefx Ap Den C-profile: 180 x 40 x 15 mm Material thickness: approx. 2.50 mm 08x Hexagon bolts, M12x35 08x Hexagon nuts, M12 16x Washers, M12 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If you require further transport or shipping, this will incur additional costs, which can be requested from us individually depending on the place of delivery and scope of delivery.

Condition: ready for operation (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Fsdpogfbytofx Ap Dspn Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. The scope of delivery includes: 1x CS Sigma profile, used Material color: cream white Profile length: approx. 2,000 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight/piece: approx. 10.000 kg The CS Sigma profiles may be bent or have slight damage or signs of rust. Our services at a glance: (Prices upon request) Assembly and installation Please note our general assembly conditions. Rack inspection Rack inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234, visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Condition: ready for operation (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. The scope of supply includes: 1x CS Sigma profile, used Material color: cream white Profile length: approx. 2,200 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight per piece: approx. 10.500 kg The CS Sigma profiles may be bent and/or have slight Fpodpfx Asgfbyzjp Don damage or signs of rust. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, 2000 kg height 1080 mm width 1500 mm nein Fedjhkku Iopfx Ap Djpn 1500 x 100 mm 1,5 x 0,53 x 0,5 m

Year of construction: 2000, condition: used, Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar jib crane, indoor crane, workstation crane, chain hoist -Manufacturer: GT-Hebetechnik, crane traverse for the transport of various loads -Load capacity: 8000 kg -Distance between hooks: min. 1000 mm / max. 2500 mm -Steel rope: O 22 mm, length 1600 mm -Dimensions: 2620/360 / H890 mm Fpodsg Dvyuopfx Ap Don -Net weight: 304 kg

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Dexion Type: P 90 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 28,000 mm Number of bays per rack row: 9 Number of levels plus floor level: 4 The scope of delivery includes: 10x pallet rack uprights, used Material color: Sendzimir galvanized Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 6,000 mm high 1,100 mm deep 72x pallet rack crossbeams, used Material color: orange I-beam: 120 x 50 mm Crossbeam type: SLI 120 |14 S 350 Clamp: 5 HK Clear width: 3,000 mm Max. load per pair of crossbeams: 1,800 kg, with evenly distributed load. 144x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 40x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x Leveling plates, used Fodpfx Apjwi N Nas Djpn Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x Load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: used, Battenfeld plasticising cylinder Ø 18 mm, IU60 vertical- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 18.03 mm centre: 18,01 mm outlet: 18,02 mm stroke volume: 22.9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalstroke volume: 22,9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld Fpsdpfx Asrr Efrjp Djn type: Ø 18 mm, IU60 vertical spare part no.: 100WW548 Dition: gebraucht

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Leibfried, pneumatic cylinder double-acting type L 81 .: 43 881 Stroke: 110 mm -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 267/80/H70 mm Fpsdpfxexay Ulo Ap Den -Weight: 2.1 kg/piece

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm -Cross-section: 150 x 65 mm Fpsdpfspm Thdox Ap Den -Photo: 600 mm (see sketch in the photos) -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Fpsdpfxezdwfis Ap Djn Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: good (used), Technical data for the extension plates: Manufacturer: Jung Heinrich Type: MPB Included in the scope of delivery: Fjdpfxeipt Dds Ap Dopn 02x extension plates, used Overall length: approx. 400 mm Overall width: approx. 129 mm Internal width: approx. 121 mm Suitable for frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing in depth: approx. 100 mm Hole spacing in width x height: approx. 85 x 100 mm Borehole diameter: approx. 10 mm Material color: blue Weight / piece: approx. 2.59 kg Note: No screws or fasteners are included in the scope of delivery.

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1095 mm -Cross-section: 200 x 60 mm -Image: 510 mm, see sketch in the photos Fpodpfx Apsttxd To Den -Transport dimensions: 1300/900/H200 mm Total weight: 250 kg