Used Magraf Uh-50 for sale (35,965)

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Lredpfx Asfhmmxekmju Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm

Condition: used, Heraeus Type: HT 7012 S2 Temperature shock test chamber, water-cooled Lrodpfxszd R Uws Akmju Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Ljdezd R Azjpfx Akmjru Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2021, 30-watt CO2 laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Exhaust system: Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC Includes monitor, keyboard, and mouse. Ljdpfsz Surusx Akmeru Software: RayJetManager pre-installed.

Condition: used, Vötsch Type: VT 7012 S2 Water-cooled version Vötsch temperature shock test chamber / environmental simulation system Model: VT 7012 S2 Two-chamber system (hot / cold chamber) For sale is a high-quality Vötsch temperature shock test chamber for rapid temperature change tests in industry, research, and development. The device is in used condition. See pictures for optical condition. Control panel and observation window are included. Temperature data: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate cold chamber: approx. 3 K/min Test chamber: Test chamber volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø approx. 67 mm Dimensions: External dimensions: approx. 930 x 2115 x 1970 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant according to nameplate: R404A: 2.9 kg R23: 1.27 kg Operating pressure ND: max. 22.5 bar Operating pressure HD: max. 25 bar Weight: approx. 1000 kg Equipment / Features: Two-chamber shock test system Rapid temperature change testing Digital control / display Program operation Observation window Cable entry Water-cooled version For your safety as a buyer, the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Scope of delivery as shown in the pictures Ljdsy Iyuwjpfx Akmoru Condition & Notes: Condition: used Inspection possible by arrangement Loading can be organized (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Lsdpfjy Hkd Hox Akmjru Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Heraeus Type: B 6030 Incubation chamber Lodpfxozdtiqe Akmoru Volume: 30 liters Manufacturer: Heraeus External dimensions: Height 552 mm x Width 552 mm x Depth 610 mm Internal dimensions: Height 231 mm x Width 352 mm x Depth 370 mm Nominal temperature: 50°C Connection: 220V 50/60 Hz 1.00 A 0.22 kW Weight: approx. 41 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2021, condition: new, Conversion kit for JUNG HF50, changing from Leonhardt-type control to thyristor control. On-site installation is also possible. Lsdpfx Akshcn Hyomeru

Year of construction: 2021, condition: refurbished (used), Spindle motor, completely overhauled for JUNG HF50 / JF520. Electrically overhauled / new bearings installed and balanced. Lredpfxehcn Spo Akmsu Exchange delivery possible, depending on availability.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Technipes TE.2/50 S/TV semi-automatic bagging system with gross weigher, year of manufacture 2024 Semi-automatic bag filling and weighing station for 15–30 kg bags, approx. 1 bag per minute, from a gluten-free flour and dry-mix co-packing plant. - Technipes gross weigher with Rubix weighing installation - Manual bag filling and weighing unit - Infeed hopper on metal frame, approx. 160 x 184 cm, fed from the floor above - Outfeed conveyor - Control cabinet Footprint: approx. 350 x 170 cm Lredpfxjz Sy E Hs Akmeu Condition: used Lot 156. Also in this auction: a second semi-automatic Technipes TE 2/50 SG/TV + LC21, 2024 (lot 81), and two fully automatic Technipes TE.2/50 bagging lines with Europack robot palletising line (lots 42, 46 and 44). Bidding online only, after registration. Dismantling and loading are mandatory and carried out by Auction Logistics at the buyer's expense: € 1.950 excl. VAT for this lot.

Condition: ready for operation (used), Bosch SPM 50 spindle module SN:372860, used, normal signs of wear, 100% functional, delivery as shown in the photos. Lrjdjx Eqzcopfx Akmou

Condition: used, mileage: 1,69,275 km, power: 70 kW (95.17 HP), first registration: 03/1969, fuel type: diesel, tire size: 9.00R20, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, gearing type: mechanical, suspension: other, total length: 7,250 mm, total width: 2,300 mm, = Additional options and equipment = - 4x2 - Leaf spring suspension = Further information = Tyre size: 9.00R20 Front axle: Steered; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf springs Lrsdpfozhvnqsx Akmou Rear axle: Twin tyres; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Reduction: single reduction; Suspension: parabolic leaf springs Unladen weight: 4,130 kg Payload: 7,870 kg Gross vehicle weight: 12,000 kg Damage: none

Condition: used, total length: 3,600 mm, total width: 2,000 mm, total height: 2,800 mm, Year of manufacture: 2001 Colour: Red Weight: 5.500 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: HFE50-20LV010254 - Drive system: CNC - Control system brand: Amada - Control system type: Operateur 2 CNC - Power [kW]: 6.0 - Number of axes [pcs]: 8: Y1+Y2+X1+X2+R1+R2+Z1+Z2 - Press force [ton]: 50 - Max. working width [mm]: 2090 - Column gap [mm]: 1665 - Throat depth [mm]: 400 - Max. stroke [mm]: 350 - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3600mm x 2000mm x 2800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Lrsdpfezwvrzjx Akmsu VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, operating hours: 11,070 h, lifting height: 4,450 mm, fuel type: diesel, mast type: duplex, fork length: 1,195 mm, fork width: 1,800 mm, total height: 3,040 mm, total length: 3,200 mm, total width: 2,000 mm, color: red, Year of manufacture: 2006 Empty weight: 7.000 kg Lifting capacity: 5.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394T01696 - Operating hours: 11070 - Lifting capacity: 5000kg - Lifting height: 4450mm Ljdpfx Ajzwc Tfjkmoru - Overhead clearance: 3040mm - Fork length: 1195mm - Maximum fork width: 1800mm - Minimum fork width: 250mm - Number of wheels: 6 Wheels - Attachment: 3rd valve to fork carriage - Options: Joystick, Half cabin, Work lights, Heating, Air tires - Mast: Duplex - Drive: Diesel - Motor brand: VW - Transport dimensions: 3200mm x 2000mm x 3040mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,250 mm, total width: 1,250 mm, total height: 2,400 mm, Year of manufacture: 1988 Colour: Blue Empty weight: 3.000 kg Price: On request - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 4441 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 50 - Min. stroke [mm]: 0 - Max. stroke [mm]: 85 - Table length [mm]: 440 - Table width [mm]: 700 - Table bore diameter [mm]: 270 - Ram width [mm]: 300 - Max. opening height [mm]: 360 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 145 - Transport dimensions: 1250mm x 1250mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg Ledoz Avbtspfx Akmjru - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of manufacture: 2021 Mileage: 2.021 km Drive: Wheel Empty weight: 408 kg Dimensions of cargo space: 310 x 150 x 195 cm Technical condition: very good Visual appearance: very good Production country: NL Please contact Vink Machinery for more information Frisian Motors Leffert FM-50 * 2021 * Lithium battery drive Lrodox I Rawopfx Akmou * 1833 km * Dutch license plate * 3 speeds * Top speed 50 km/h * Glass windshield with wiper * Polycarbonate rear window * Tow bar * Built-in charger

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Location: Nattheim. Lrodpfx Aey R Tqkekmeu

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, quill stroke: 100 mm, overall weight: 7,000 kg, Equipment: documentation/manual, X-axis travel: 1.400 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Table dimensions: 1.800 x 630 mm Max. table load: 1.500 kg Spindle taper: ISO 50 Spindle speed range: 45 tot 2.240 rpm Featured with: - Heidenhain Positip DRO - Vertical/Horizontal milling head - Horizontal milling arbor support - Horizontal milling arbors Lrodpfoz Tdhuox Akmou - Manual spindle quill 100 mm - Coolant system - Machine user manuals

Condition: good (used), Year of construction: 2013, operating hours: 21,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens, controller model: Sinumerik, table load: 200 kg, rotational speed (max.): 12,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Universal machining center DECKEL MAHO DMU 50 Ecoline Year of manufacture: 2013 Control system: Sinumerik 840D Operating hours: 21,000 hours Technical data: Spindle speed: 10 - 12,000 rpm Drive power: Internal cooling system pressure: 12 bar Tool holder: SK 40 Number of magazine positions: 30 Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: +5/-110° C-axis: 0.001° Accessories: - Chip conveyor - Coolant system, 12 bar Lredpfxsz Td Aro Akmsu Further data and images will follow. All technical specifications are without guarantee.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 Lrodpfxo Aaaqqe Akmsu 400V, 50Hz, 9.8kW, 15A Weight: 130 kg

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Amada Lrjde Aazxcopfx Akmsu Type: HFP 20 50 Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 4,700 mm, fork length: 1,600 mm, total length: 4,470 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 Lsdexd Hflspfx Akmeru - Anhängerkupplung, Art Bolzen

Condition: used, - Brand: VMI - Model: Phébus 2172 SEW - Machine No.: 147599 - Flour capacity: 50 kg - Dough capacity: 80 kg - Bowl capacity: 170 L - Voltage: 400 V - Current: 24.3 A - Power: 7 kW - Capacity: 50 kg Lrjdpfjy Spa Rex Akmeu - Bowl: fixed - Bowl volume: 170 L - 1 timer - 2 speeds - Safety: thermal protection - Head safety: integrated protection - Chassis: tubular frame with stainless steel feet - Casing: ABS-PMMA - Lid: liftable by lever - Head: liftable by lever - Start: progressive tool start-up

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, - and other bulk materials. The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: Lredpoz T Ahmefx Akmeu - simple bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Take-off conveyor RC-50 – no. 3018

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm Ljdpfeztpmqox Akmoru – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - installed 4-knife cutterheads at a height of 120mm - spindles adjustable up/down, left/right - stepless feed speed adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES – ideal for processing flooring – electric table lifting – Czech production – used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)