Used Mass Spectrometer for sale (681)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. Hodpfjua Tbwjx Alwsu SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER Hodpfxottxg Io Alwou When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: used, Weinig Unimat 23 SP automatic planing and splitting machine for the precise planing (or pre-planing) and splitting of solid timber in a single operation. The machine delivers a high standard of finish and is ideal for efficient mass production in the timber industry. Technical data: - Spindles: 4 - Working width: 230 mm - Working height: 120 mm - Spindle 1: Bottom (5.5 kW) - Spindle 2: Top (5.5 kW) - Spindle 3: Right (11 kW) - Spindle 4: Left (11 kW) - Feed: 5.5 kW Hedpfx Ajzrxywslwsu

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Hodpfx Aozt Ni Eolwsu Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Hedpfx Aljzii Awowsu Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Hedpfx Aezii Dholwsu Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: new, Year of construction: 2015, Complete Knapp Fastline System RA2519 _____ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. _____ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0,75 m/s RollerDrive curves 11 units Hjdpjzwylrofx Alweu Interroll DriveControls 277 units available _____ High-quality industrial design The KNAPP Fastline series is one of the proven modular conveyor systems for automated material flows. The system was developed for the continuous transport of cartons and containers and is suitable for use in: • Distribution centers • Shipping logistics • Production logistics • E-commerce • Replacement or expansion of existing conveyor systems Thanks to its modular design, individual conveyor sections can be used just as easily as complete system components. _____ Scope of Delivery The scope of delivery includes, among other things: Conveyor Technology • Approx. 300 meters of roller conveyor systems • Accumulation roller conveyors • Drive roller conveyors • Conveyor modules of various lengths • Conveyor curves Curves • 11 RollerDrive curves Drive Technology • 277 Interroll DriveControls EC310 Steel Structures • Extensive support columns • Column bases • Connecting elements Pneumatics • Pneumatically controlled accumulation stations • Pneumatic assemblies • Sensors Documentation • Original KNAPP parts lists • Transport and package lists • Documentation of the main assemblies _____ Technical Concept The system is based on the modular KNAPP Fastline system. The material being conveyed is transported on roller conveyors. The storage bins are pneumatically controlled. Thanks to the modular design, conveyor routes can be easily extended or adapted to new warehouse layouts. A key advantage is the use of commercially available industrial components, ensuring that replacement parts will remain available in the future. _____ Premium Manufacturer KNAPP is one of the world\'s leading manufacturers of automated material flow systems. The system is not a custom-built or specially designed solution, but rather based on an industrial mass-production platform. _____

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: - Cutting length: approx. 2,200 mm Hodpfx Alszryu Ajwou - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF

Condition: used, Molding line for filled products such as cordon bleu (fresh weight 100gr) The fresh weight per portion is ± 100 grams. The main components are 48 grams of ground meat 10 grams of processed cheese 10 grams of sausage or ham the rest is breadcrumbs consisting of: “Risco Brevetti” vacuum filler Hsdezzkz Espfx Alweu Type RS303 (filler-grinder) with loader for Eurobins with meat grinder heat (Filler-Grinder), Type RS 70 BJ 2010 filler-grinder opening 2 filling strips on top of each other of 90 x 5 mm + MasterSlice “Marel - Stork” Type 1511 Slicer for sausage or ham bars caliber 50 mm + “Karl Schnell” vacuum filler Type 596 P 10 SE Used to fill the processed cheese linked to the Masterfill + “Marel” MasterFill Type MTFU Takes the processed cheese from the Karl schnell vacuum filler and portion it + “Marel” MasterFormer Type TA1521 Using virtually no pressure, the MasterFormer system produces high quality filled and unfilled products with a handmade look and retention of structure and texture of meat mass. The MasterSlice and MasterFill modules allow solid, liquid and paste fillings to be added to the meat mass in the MasterFormer supply line. The MasterFormer offers a wide variety of end product possibilities with minimal waste of ingredients and maximum flexibility, including cordon bleu or steak haché. Features : · Ultra low-pressure forming, to retain structure and texture of meat mass · Fully automatic production of filled and unfilled products, with a handmade look · MasterSlice adds cut-to-measure slices of solid filling to the basic raw material · MasterFill is used to add liquid or paste fillings · Minimal waste of ingredients · End products can be packed directly onto trays or, alternatively, are ready for further processing · Easy to operate and clean in good condition in good working order The machine is fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set Hodeunaqvspfx Alwsu - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, We offer the Inject Star P60 separator – an industrial machine for advanced meat recovery (AMR), designed for meat and poultry processing plants and factories that want to maximize the use of raw materials and reduce production losses. The P60 separator works on the basis of a hydraulic press with a crushing chamber, which separates meat from bones and hard tissues and then presses it through a perforated filter. How does the Inject Star P60 separator work? In a special feeding device, the bones are fed into the pressing chamber and pre-compacted. Then, a linear hydraulic system separates the advanced meat from the bones and pushes it through a perforated filter (standard 8 mm). This results in high-quality meat mass while maintaining low calcium content and minimal temperature increase during the process, which has a positive effect on the quality and functionality of the final product. The AMR Inject Star system enables the recovery of up to approx. 35% of meat from red bones, with low wear on consumables and relatively low running costs. Technical data: Hsdjycc H Rjpfx Alwou Manufacturer: Inject Star Model: P60 Power supply: 400 V, 3Ph, N Installed power: 18 kW Capacity: 900 kg/h Capacity with bone breaker: 1500 kg/h Process type: hydraulic pressing system with perforated filter (8 mm, optionally 2 mm) Dimensions (L x W x H): 4900 x 1900 x 2900 mm Weight: approx. 4100 kg Advantages of the Inject Star P60 separator High meat recovery from bones – up to approx. 35% of high-quality meat can be recovered from red bones, which significantly increases the profitability of the raw material. Low calcium content – the end product is characterized by a low calcium level (< 1,000 mg/kg) thanks to the use of a precision pressing chamber and perforated filters. Minimal temperature increase – the separation process causes only a slight increase in meat temperature, which has a positive effect on color, structure, and technological properties. Low operating costs – the low-wear design and low maintenance requirements reduce running costs and the risk of expensive downtime. Possibility of line expansion – according to the manufacturer’s offer, the separator can work with a bone crusher as a preliminary stage and with additional soft tissue separators, as well as various loading systems.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. Hsdpszx Rz Hjfx Alwju The indicated price is NET and VAT will be added where applicable.

Condition: used, maximum load weight: 15,230 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2011, * Wood trailer * Achleitner, 2-axle * Type: 2ANR18 * Trailer * Body: Stanchion * Color: White * Tare weight: 2,760 kg * Maximum permissible total weight: 18,000 kg * Technically permissible total mass: 18,000 kg * Payload: 15,240 kg * Axles: 2 * Permissible axle load: 9,000 kg per axle Hsdpfszqiv Hjx Alwju * Tires: 265/70 R19.5 * Year of initial registration: 07.11.2011

Condition: used, maximum load weight: 21,891 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 09/2012, loading space length: 13,500 mm, loading space width: 2,490 mm, loading space height: 2,200 mm, * Vehicle Data * Manufacturer: Schmitz Cargobull * Axles: 2 * Body: Box, double-deck, with tail lift (without refrigeration unit) * Vehicle Type: O4 Semi-trailer * VIN: WSM000005102610 * Type / Variant / Version: SCB?S2/260 O 30/A 00 * Color: White * Weights * Unladen weight: 8,109 kg * Permissible gross vehicle weight: 30,000 kg * Technically permissible gross mass: 30,000 kg * Payload: 21,891 kg * Fifth wheel load: 13,000 kg * Axle Loads * 1st axle: 9,000 kg * 2nd axle: 9,000 kg * Tires * 385/65 R22.5 160J on 11.75 × 22.5 ET120 Hjdpfxozu U Hxe Alwou * Note: The trailer was originally approved as a refrigerated box. However, the refrigeration unit is no longer present. The current body is a box-type double-deck with a tail lift, without a refrigeration unit. * Year of manufacture: 07.09.2012

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Hodpfszzavfex Alwju Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Condition: excellent (used), Year of construction: 1995, High-performance rotary transfer machine, specifically designed for the mass production of medium and large-sized parts. Thanks to reduced production times, high precision, and reliability, it contributes to greater efficiency in the mechanical machining sector: it can perform up to 15 machining operations, transverse machining operations, or front-side machining operations on both sides. Hodpfxjznnpmo Alwju

Condition: new, mileage: 500 km, power: 152 kW (206.66 HP), color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph is happy to assist you by phone at: Hodpsyklwuefx Alweu Front axle suspension: Quad-Tor torsion bar suspension, axle configuration: 2 axles, rear-wheel drive, left-hand drive, engine: 3.0 l D EVIe 152 kW (207 hp), transmission: HI-MATIC 8-speed automatic gearbox, permissible gross mass Daily 7.0 t / 7.2 t, rear axle leaf suspension, rear axle with twin tires, vehicle version: crew cab 6+1, wheelbase 4350 mm, standard specification, seat belts with warning signal for driver and passenger, standard seat belt color, belt tensioner passenger side, fabric seat covers, 4G connectivity box incl. TCO service contract, digital VIN code, daytime running lights, digital EC tachograph 4.1, light and rain sensor, manual high beam control, bodybuilder interface, mirrors for 2350 mm body width, rear parking sensors, standard Daily identification, wide wheel arch lining, rear blind spot radar, fuel filler neck in B-pillar, lane departure warning (LDWS), vehicle badge standard, tire pressure monitoring system (TPMS), forward monitoring (MOIS), side vehicle designation, standard paint finish, MY 2024, standard rear lights, electrically adjustable and heated exterior mirrors, cab width 2000 mm, driver fatigue warning system (Driver Drowsiness Attention Warning), warning triangle, version and dimensions according to ECE-27 guideline, central locking with remote control, grab handle on A-pillar, COC EU type approval, 2 wheel chocks, traffic sign recognition with intelligent speed assist (ISA), warning beacon, electric window lifters for front doors, left-hand drive for right-hand traffic, front airbags for driver and passenger with belt tensioners, first aid kit, pre-installation for alcohol interlock, speed limiter 90 km/h, spare wheel mount at rear end of frame, AdBlue tank 20 liters under cab, weight variant 2500/5350 kg, spare wheel, dimension corresponding to chassis tires, rear trapezoidal spring, rear underrun protection, steel rims, integrated 90 l fuel tank, C-profile steel ladder frame, tires 225/75 R16, standard suspension front axle, homologation for standard freight transport vehicles, standard data set, exhaust tailpipe centrally under vehicle, standard oil pan, aluminum radiator, rear axle ratio i 4.30, emissions standard EURO VI E, heated crankcase ventilation, standard starting strategy, parking brake control for remote ignition, engine speed 3500 rpm, diesel particulate filter, standard fuel, heated fuel filter, automatic torque converter transmission HI-MATIC 8HP, comfort noise insulation, side marker lights supplied loose, no bench seat in passenger compartment, luxury seat for passenger with armrest and lumbar support, adjustable in height, tilt and length, hydraulically suspended, heated, additional speed limiter, switch for body lighting, battery 12 V 105 Ah/950 A, 12 V 13-pin trailer socket, cab rear wall with window, recommended for certain body types to monitor rear traffic, additional vehicle key with remote control, storage box next to driver’s seat with USB port, roof shelf above windscreen, pre-installation for toll system (OBU), includes antenna and wiring on dashboard without receiving device, trailer load 3.5 t, ball head trailer hitch, electric parking brake, standard GVWR, alternator 3500 watts (14 volts x 250 amperes),...

Condition: new, Year of construction: 2026, Three-phase powered positioner Table and arm rotation using hydraulic turntables Arm height adjustment using a hydraulic cylinder Control of functions on the positioner housing Useful for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% The ability to rotate without limitations in 2 axes, and with additional vertical and horizontal movement, allows for any positioning of the clamped object (including upside down). The 3-axis positioner provides a significant improvement in working conditions compared to traditional rotary-tilting positioners (optimal object positioning, easy operation). Advantages and benefits: For the employer: Increased work efficiency by up to 40% through optimal object positioning - resulting in a short payback period for the device Hsdpfxjhtq Rbj Alwju Increased production efficiency without requiring additional space in the production hall Improved quality of welded joints - always possible to weld in the downhand position The robust design of the device ensures long-lasting, trouble-free operation For the operator: Ensures an ergonomic working posture Minimizes the risk of accidents - no need to change the object clamping Eliminates work interruptions caused by waiting for a crane Easy assembly and operation Full automation of welding is possible by using Kawasaki welding robots. Our offer also includes positioners with a robot and an integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE FOR POSITIONER OPERATION FOOT PEDAL WITH CABLE FOR TABLE ROTATION CONTROL SMOOTH ADJUSTMENT OF TABLE ROTATION SPEED AND ARM ROTATION SPEED CONSTANT TABLE ROTATION FUNCTION ARM LENGTH AND SHAPE TABLE SIZE AND SHAPE ROTATIONAL MASS We can manufacture a positioner according to individual customer specifications.

Condition: new, Year of construction: 2026, Three-phase powered positioner Table and arm rotation using hydraulic turntables Arm height adjustment using a hydraulic cylinder Control of functions on the positioner housing Useful for positioning components during: welding cleaning Hsdshzuv Hopfx Alwju assembly Increases work efficiency by up to 40% The ability to rotate without limitations in 2 axes, and with additional vertical and horizontal movement, allows for any positioning of the clamped object (including upside down). The 3-axis positioner provides a significant improvement in working conditions compared to traditional rotary-tilting positioners (optimal object positioning, easy operation). Advantages and benefits: For the employer: Increased work efficiency by up to 40% through optimal object positioning - resulting in a short payback period for the device Increased production efficiency without requiring additional space in the production hall Improved quality of welded joints - always possible to weld in the downhand position The robust design of the device ensures long-lasting, trouble-free operation For the operator: Ensures an ergonomic working posture Minimizes the risk of accidents - no need to change the object clamping Eliminates work interruptions caused by waiting for a crane Easy assembly and operation Full automation of welding is possible by using Kawasaki welding robots. Our offer also includes positioners with a robot and an integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE FOR POSITIONER OPERATION FOOT PEDAL WITH CABLE FOR TABLE ROTATION CONTROL SMOOTH ADJUSTMENT OF TABLE ROTATION SPEED AND ARM ROTATION SPEED CONSTANT TABLE ROTATION FUNCTION ARM LENGTH AND SHAPE TABLE SIZE AND SHAPE ROTATIONAL MASS We can manufacture a positioner according to individual customer specifications.

Condition: new, Year of construction: 2026, Three-phase powered positioner Table and arm rotation using hydraulic turntables Arm height adjustment using a hydraulic cylinder Control of functions on the positioner housing Useful for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% The ability to rotate without limitations in 2 axes, and with additional vertical and horizontal movement, allows for any positioning of the clamped object (including upside down). The 3-axis positioner provides a significant improvement in working conditions compared to traditional rotary-tilting positioners (optimal object positioning, easy operation). Advantages and benefits: For the employer: Increased work efficiency by up to 40% through optimal object positioning - resulting in a short payback period for the device Increased production efficiency without requiring additional space in the production hall Improved quality of welded joints - always possible to weld in the downhand position The robust design of the device ensures long-lasting, trouble-free operation For the operator: Ensures an ergonomic working posture Minimizes the risk of accidents - no need to change the object clamping Eliminates work interruptions caused by waiting for a crane Easy assembly and operation Full automation of welding is possible by using Kawasaki welding robots. Our offer also includes positioners with a robot and an integrated control system. ADDITIONAL OPTIONS: Hjdshzuwcepfx Alwju REMOTE CONTROL WITH CABLE FOR POSITIONER OPERATION FOOT PEDAL WITH CABLE FOR TABLE ROTATION CONTROL SMOOTH ADJUSTMENT OF TABLE ROTATION SPEED AND ARM ROTATION SPEED CONSTANT TABLE ROTATION FUNCTION ARM LENGTH AND SHAPE TABLE SIZE AND SHAPE ROTATIONAL MASS We can manufacture a positioner according to individual customer specifications.

Condition: new, Year of construction: 2026, Three-phase powered positioner Table and arm rotation using hydraulic turntables Arm height adjustment using a hydraulic cylinder Control of functions on the positioner housing Useful for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% The ability to rotate without limitations in 2 axes, and with additional vertical and horizontal movement, allows for any positioning of the clamped object (including upside down). The 3-axis positioner provides a significant improvement in working conditions compared to traditional rotary-tilting positioners (optimal object positioning, easy operation). Advantages and benefits: For the employer: Increased work efficiency by up to 40% through optimal object positioning - resulting in a short payback period for the device Increased production efficiency without requiring additional space in the production hall Improved quality of welded joints - always possible to weld in the downhand position The robust design of the device ensures long-lasting, trouble-free operation For the operator: Ensures an ergonomic working posture Minimizes the risk of accidents - no need to change the object clamping Eliminates work interruptions caused by waiting for a crane Easy assembly and operation Hedpfxehtq Rie Alwju Full automation of welding is possible by using Kawasaki welding robots. Our offer also includes positioners with a robot and an integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE FOR POSITIONER OPERATION FOOT PEDAL WITH CABLE FOR TABLE ROTATION CONTROL SMOOTH ADJUSTMENT OF TABLE ROTATION SPEED AND ARM ROTATION SPEED CONSTANT TABLE ROTATION FUNCTION ARM LENGTH AND SHAPE TABLE SIZE AND SHAPE ROTATIONAL MASS We can manufacture a positioner according to individual customer specifications.

Condition: like new (used), Year of construction: 2018, operating hours: 700 h, functionality: fully functional, type of input current: AC, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, overall weight: 5,000 kg, workpiece weight (max.): 4,000 kg, cutting current: 200 A, KOIKE Gammatec 2040 – CNC Plasma Cutting Machine for Sale 📌 Manufacturer / Model: KOIKE Gammatec 2040 📆 Year of manufacture: 2019 📍 Location: Finland 💪 Powerful and precise CNC plasma cutting solution The KOIKE Gammatec 2040 is a heavy-duty industrial CNC plasma cutting machine, designed for high accuracy and reliable production. It is an excellent choice for metal workshops, fabrication companies, and industrial manufacturing environments. 📊 Technical specifications 📏 Cutting area (X × Y): 4,000 × 2,000 mm 🔪 Maximum cutting thickness: up to 60 mm 🌀 Number of torches: 1 Hedpfxeygk Sio Alwsu 🧠 Control system: CNC ⚡ Plasma system: Kjellberg HiFocus 🔌 Power requirement: approx. 2 kVA 📦 Machine dimensions: approx. 5,000 × 2,400 × 1,000 mm ⚖️ Machine weight: approx. 4,000 kg 📈 Key advantages ✅ Large cutting table (4 m × 2 m) – ideal for large metal sheets ✅ CNC-controlled precision for industrial production ✅ Proven KOIKE quality and robust machine design ✅ Suitable for continuous workshop or factory use 🛠 Condition 🔹 Used – very good condition The machine can be inspected and tested prior to purchase. Power source: Smart Focus 200 Mains voltage: 3 × 400 V, 60 Hz Cutting current: 35 – 200 A Marking current: 10 – 50 A Cutting range: Maximum: 60 mm Recommended: 1 – 10 mm Piercing: Maximum: 32 mm Plasma gases: O₂, Ar / H₂, N₂, Air Piercing gases: Ar, N₂ Dimensions (L × W × H): 1030 × 680 × 1450 mm Mass: 388 kg Plasma machine torch: PerCut 4000 Quick change head: PerCut 4000

Condition: new, Year of construction: 2025, Laser power: 40000w/30000w/22000w/20000w/12000w/6000w/3000w Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3048mm*1524mm~8100mm*2500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Hedpfxsg Ekdde Alweu Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 3. One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 4. Cast Iron Bed Featuring good shock absorption, Cast Iron Bed keeps its shape all the way with the optimal mechanical property.

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired Hodpfoy T Iyfex Alwju

Condition: excellent (used), functionality: fully functional, load capacity: 650 kg, Equipment: foot remote control, Tilting rotary table with 650 kg load capacity, foot remote control Faceplate diameter: 850 mm Rotational speed: 0.01–2.0 rpm Mass coupling: 300A Optionally available with 3-jaw chuck Tilted height: 900 mm minus 120 mm Horizontal height: 950 mm minus 120 mm Hsdpfxewtrume Alwsu