Used Mayser Sg-Efs 132 for sale (2,069)

Condition: used, For sale: high-performance open fryer by PITCO. Capacity: 2x 25 l. Digital controls. Oil filtration. Cold zone. Programmable time and temperature settings for 8 products per tank. Gsdpeyzzanofx Aatjbt The fryer may contain residues and oil contamination from previous use. Dimensions: 80 x 88 x 116 cm.

Condition: new, Year of construction: 2021, lifting height: 6,000 mm, load capacity: 10,000 kg, We offer this new, unused Delta SG.0.DTS.10002 chain hoist, year of manufacture 2021. List price: €15,000.00 Manufacturer: Delta Model: SG.0.DTS.10002 Gsdpfey N Tpdsx Aatsbt Year: 2021 Condition: new Lifting capacity: 10.0 t If you have any questions or need further information, please feel free to send us a message or call us.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386V11914, Year of construction: 2019, operating hours: 5,993 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lift height: 4,625 mm Overall height: 2,121 mm Free lift: 1,519 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Version: 3-wheel electric Battery: 48 V, 625 Ah, tested very good performance at 50.1 V Operating hours: 5,993 h EQUIPMENT Former Linde full-service unit Gbedoytn T Ropfx Aatot UVV inspection valid until 02/2027 Next service due 02/2027 or in 1,000 operating hours All dimensions are rounded figures. No liability for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email proof of payment! Collection WITHOUT further registration possible Monday to Friday 7:00 am to 4:30 pm. A mast that is too high can be dismantled for transport upon request. In case of delayed collection, a storage fee of €20 per machine per day will be charged (payment must be settled prior to pickup).

Condition: used, Year of construction: 2021, functionality: unexamined, Metal Band Saw Automatic Daiß + Partner HBA 320 SG Power-Line, HBA 320 SG Power-Line, Year of complete overhaul: 2021, mitre saw in 2-column design, drive power: 240/400 Volt, 2.2 kW frequency motor, cutting speed: 15 - 105 m/min, reinforced gearbox for high cutting performance, hydraulic system flow rate l/min, electrics: 240/400 Volt, 50 Hz three-phase power, control voltage: 24 Volt DC, automatic feed length: 8,400 mm (in combination with PS 210: 600 mm), multiple feed standard: 2-fold, maximum workpiece support weight: 2000 kg, maximum transport force: 1000 kg, transport frame repeat accuracy: approx. 0.02 - 0.04 mm, mitre cut angle accuracy: approx. 0.05 mm at 100 mm diameter for St 37 material, saw blade dimensions: 4400 x 34 x 1.1 mm, blade tension: constant tension via spring set, weight: 2330 kg. Dimensions (L x W x H), Features: - 1 control cabinet opposite - 1 CNC control PS 95 - 2600 x 2200 x 1950 mm - 2-axis control for feed and mitre adjustment - 1 frequency drive 2.2 kW - 1 Daiß+Partner Power-Box - 1 motor-driven chip brush Gedpfx Aajyr Ifwjtsbt - 1 stepless drive via frequency converter motor - 1 micro-cooler instead of coolant unit - 1 hydraulic blade tensioning - 1 saw blade breakage monitoring - Inspection under power possible

Condition: new, Year of construction: 2026, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Gbodpfxsrwwt Se Aatot

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, COSMOS SG 840 NC Precision Surface Grinding Machine, grinding area 800 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, highly user-friendly, incl. magnetic chuck 800 x 400 mm with variable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, finish grinding, spark-out and lift-off, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to handle installation / on-site training, as well as future service! Financing / leasing available, we will gladly provide you with an offer! Godpjw Ifdcefx Aatobt

Condition: new, Year of construction: 2026, COSMOS SG 1050 NC precision surface grinding machine with a grinding area of 1000 x 500 x 400 mm, 7.5 kW spindle power, grinding wheel 400 x 100 x 127 mm, automatic grinding cycle, Mitsubishi PLC control, simple and user-friendly operation, including magnetic chuck 1000 x 500 mm with holding force adjustment, automatic dressing unit mounted on the spindle housing with dimension compensation, water tank with paper band filter, stepless speed control of the grinding spindle, full enclosure. We would be happy to handle the installation/training on-site, as well as the subsequent service. 12 months warranty, absolutely top price-performance ratio! Financing/leasing is no problem, we will gladly provide you with an offer! Gjdpfx Aajhzlm Hotsbt

Condition: used, Year of construction: 2022, Side plates Working width 3.0 m Transport width 3.0 m Rear scraper / prism roller Ø 45 cm with rigid three-point tower Working width 2.9 m / transport width 3.0 m Tine attachment 3.0 m 3-beam, rigid, line spacing approx. 15 / cm, complete with long Gedpfx Aast Dv N Totobt

Condition: excellent (used), Year of construction: 2006, 4 AXIS CNC ROUTER Gbedpfoxdhkcox Aatjt X axis : 3400 mm, pos. speed : 105 mtr/min Y axis : 1720 mm, pos speed : 80 mtr/min Z axis : 400 mm, pos speed : 25 mtr/min C axis : See pictures attached Main router : POWER 2000 : 10 Kw ( 15 Hp ) Router speed : 900 - 18.000 rpm Tool chucks : HSK63 Rotating tool bank : 12 plc. Number of alloy vacuum beams : 8 pc. Number of vacuum suction cups : 3 x 8 = 24 pc. NUM 1040 / Windows XP Pro / XILOG Plus Drilling : 12 vertical(7 right/5 Left), 6 horisontal ( X : 2 + 2 / Y : 1 + 1 ), CC 32 mm Saw spindle, max sawblade : 200 mm, 0 - 360 degree, 2,2 Kw BECKER vacuum pump : 250 m3/hour, 5,5 Kw Waste conveyer in bottum of machine, outlet : Right side of machine All tools on pictures included Machine weight : 4600 Kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Gedpfx Aasv Hr Nxstebt

Condition: good (used), Year of construction: 2002, Station 1: Cutting components to length Gbodpfx Aey Hv Uqjatet Station 2: Drilling in the end face at pitch dimensions of 27, 32 or 60 mm, to a depth of 95 mm Station 3: Additional drilling in the end face or blowing out the drill holes from Station 1 Station 4: Deflection testing Processing of strips: possible with lengths between approx. 400/450 mm up to approx. 2500 mm

Condition: good (used), Year of construction: 2002, Station 1: Cutting components to length Godpfx Ajy Hv Nuoatebt Station 2: Drilling in the end face at pitch dimensions of 27, 32 or 60 mm, to a depth of 95 mm Station 3: Additional drilling in the end face or blowing out the drill holes from Station 1 Station 4: Deflection testing Processing of strips: possible with lengths between approx. 400/450 mm up to approx. 2500 mm

Year of construction: 2023, condition: as good as new (ex-display), Pad Printing Machine TIC 132 SCEL Gbodjkzkdfspfx Aatst 2 colour machine, table-top model, pneumatic control, closed system, ink cup ø 90 mm, clichée size: 2x100x200mm, incl. pad cleaning station, height adjustable pneumatic controlled sliding table, pad pressure 105kg when 6bar. Needed connection: compressed air 6bar, 230volts, 50cycles

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2SG00002246, High-quality gear motor. The cutting chamber and gear motor of the SG-24T are from world-renowned manufacturers. The SG-14/24N series features a combined tooth and blade cutting edge. The cutting blades break large pieces into small ones, and the tooth cutting edge shreds the material with less dust. The cutting edge is designed to the desired size so that it can be reused immediately. The innovative cutting edge with inclined teeth reduces the possibility of stress concentration. It extends the service life and reduces dust generation. The motor shaft and rotor shaft of the SG-14/24T/24N are connected with a shaft coupling, allowing for convenient motor replacement. A signal light indicates a motor blockage, which can be cleared by reversing the motor. It automatically returns to normal operation once the fault is resolved. Gbodpfxev Unt Ae Aatjt Compact design, easy to maintain and clean. Feed hopper made of transparent PC.

Condition: used, spindle diameter 130 mm x-travel 6000 mm y-travel 1750 mm z-travel 600 mm w-axis 800 mm spindle taper SK 50 control Siemens 8M type 8M mm table surface area 1500x1300 mm Table load . kg turning speeds . U/min spindle motor . kW feed . m/min total power requirement . kW weight of the machine ca. 75 t dimensions of the machine ca. . m Gsdpfx Ajyq Swnjatobt Tool magazine: 60 tools The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Boring power 35 mm turning speeds max. 810 U/min core drilling diameter max. 35 mm tool taper Weldon 19,05 mm bore stroke 210 mm weight 11 kg connected load frequency 230 V Gjdpsidabvsfx Aatsbt engine output 1,6 kW Dimensions (LxWxH) 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg

Condition: good (used), ERLO SG- 18 tapping drill CEE Gedpfx Astrdimoatsbt Table with casters Instruction booklet

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Maintenance and service-friendly drive concept ALMiG Gear 132 Year of manufacture 2011 Final pressure 10 bar Motor power 132 kW Volume flow : 18,04 Length 2800 mm Width 1400 mm Height 2025 mm Weight 3830 kg Gjdpfsttv Ibjx Aatebt Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: used, machine/vehicle number: 07040478, Electric Motor AC Motoren GmbH Type AH 315 MA-4 400/690V 50Hz 132 kW 1485 RPM 440 60Hz 158 kW 1782 RPM 228A IP55 Gbsdpfx Aaec Sqvlstst Complete with cooler make Wistro 380-500V 50/60Hz 255/370W

Condition: excellent (used), For sale: a Lenze GST04-2MVBR-071C32 geared motor with a three-phase Lenze MDEMA1M071-32 motor, rated at 0.37 kW. The unit is used, fully functional, and ready for operation. Its technical condition is very good, with normal signs of wear resulting from operation. The robust cylindrical gearbox is suitable for driving conveyors, feeders, production machines, and other industrial applications. Technical specifications: Gsdpfx Aasznvlietebt Manufacturer: Lenze Gearbox model: GST04-2MVBR-071C32 Motor type: MDEMA1M071-32 Power: 0.37 kW Power supply: 3×230/400 V, 50 Hz Motor speed: 1410 rpm Output speed: 112.2 rpm Gear ratio: i = 12.57 Output torque: 31 Nm Protection class: IP55 Insulation class: F

Condition: excellent (used), For sale: Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the pictures. Thanks to its compact design and worm gear, the geared motor is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Supply: 3×220–240/380–415 V AC Gjdpfjznclcsx Aatobt Frequency: 50 Hz Motor speed: 1370 rpm Output speed: 133 rpm Torque: 22.6 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the pictures.

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good, with normal signs of use visible, consistent with its operation. This geared motor is ideally suited for driving conveyors, feeders, production machines, mixers, packaging machines, and many other industrial devices requiring a reliable drive. Gbodpfx Aoznb Txsatot Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Power supply: 3×230/400 V AC Frequency: 50 Hz Motor speed: 1395 rpm Output speed: 140 rpm Torque: 22 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: excellent (used), For sale: Lenze GST04-2B VCK071-32 gearbox with a 0.37 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gearbox is in good technical and visual condition. It shows normal signs of wear and tear consistent with use. Its robust construction and high torque make it ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: Lenze Gearbox model: GST04-2B VCK071-32 Motor manufacturer: Lenze Motor type: MDEBA1M071-32 Power: 0.37 kW Supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1360 rpm Output speed: 44 rpm Gsdszmy Uxspfx Aatebt Gear ratio: i = 31.6 Output torque: 79 Nm Ingress protection: IP54 Insulation class: F Operating mode: S1

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 3 Aerzen VM 30 screw compressors Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Gjdpfx Aorkpp Heatebt Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular maintenance was carried out by a qualified service company!! Not operated since 2019. Have been stored in a dry and heated location since then.

Condition: excellent (used), Year of construction: 2009, operating hours: 99,000 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.368 m³/h, pressure (max.): 13 bar, COMPAIR L132SR-13A Screw compressor serviced, for sale in excellent condition 123kw power, air flow: 420 m3/h Manufacturer: Compair L132SR 13A Gbsdstvwwbspfx Aatst year of manufacture: 2009.04 operating hours: 99000 Drive power: 132Kw Pressure 13 bar Flow rate: 22.8 m3/min Delcos XL control Main rotor RPM: 2980 voltage: 400v 50Hz 3 phase 85A machine weight: 2358 kg dimensions: 1722 x 920 x 1659