Used Mecos Syncro 135/3000 for sale (6,524)

Year of construction: 2023, condition: new, 3000 Kg welding rotary table, hydraulic height adjustable Complete set speed 0,05 to 0,6 rpm table diameter 1200mm inclination 0 to 120 Total height adjustment approx. 700mm Height adjustment with vertical disc to center 960 mm ~ 1910mm Dimensions with horizontal disc Iaodpfek Adlijx Anvju 1200mm to 1900mm

Condition: new, Year of construction: 2023, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm Diameter of face plate 1400mm Iasdpfx Ansqvnh Teveu Tilt angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW

Condition: as good as new (ex-display), Protec KT 3000 HV, Hydraulically height adjustable Load 3000 KG Manual remote control with digital display Double foot remote control Height approx. min. 700mm tilted to middle, height max. 1400mm Diameter faceplate 1400mm Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Iedpfx Anefxpggovoau Motor power 3 KW

Year of construction: 2022, condition: new, 3000 Kg load capacity welding turntable, very robust Iaedpfx Ajfxphlonvsu speed infinitely variable from 0,05 to 0,7 rpm Diameter turntable 1400mm inclination up to 120 height horizontal 1300mm, tilted to middle 1050mm length 2,0 m x width 1,4 m hand remote control with digital display and foot remote control

Condition: new, Year of construction: 2024, Welding rotary table 3000 Kg load capacity with hand and foot remote control diameter 1400 mm bore 100mm Iodpjgfqliofx Anvjau height 580mm speed stepless 0 - 0,6 rpm Motor AC 380 V

Condition: new, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height adjustable Load 3000 KG with load center of gravity 300mm Handheld remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm Diameter of face plate 1400mm Inclination angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW Iasdpfx Ajt Ugm Ronvju Perforated plate surcharge

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, Equipment: foot remote control, rotational speed infinitely variable, 3000 kg load capacity welding positioner, complete set Horizontal load capacity: 3000 kg, tilted load capacity: 3000 kg 2 gears for tilt adjustment Motor protected by two steel swing doors Iodpfxsw T S Hue Anvoau Very robust design Speed steplessly adjustable from 0.05 to 0.7 rpm (optionally up to 1.5 rpm) Turntable diameter: 1400 mm Tilt up to 120° Height horizontal: 1300 mm, tilted to center: 1050 mm Dimensions: Length 2.0 m x Width 1.4 m Handheld remote control with digital display and dual foot pedal

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, 3000 kg load capacity welding turntable, very robust Speed infinitely variable from 0.05 to 0.7 rpm Turntable diameter 1400mm Inclination up to 135 Height horizontal 14650mm, tilted to center 1265mm Length 2.12 m x width 1.4 m with hand remote control and double foot remote control Iedotuqd Ujpfx Anvjau

Condition: new, Year of construction: 2023, 3000 Kg load capacity welding rotary table, Iasdpfx Anelamr Novou very robust speed infinitely variable from 0,05 to 0,7 rpm diameter rotary table 1400mm inclination up to 0 - 120 height horizontal 1450mm, tilted to middle 1250mm length 2,0 m x width 1,6 m with remote control

Year of construction: 2022, condition: as good as new (ex-display), 3000 Kg load capacity welding turntable, very robust speed infinitely variable from 0,05 to 0,7 rpm Diameter turntable 1400mm inclination up to 120 height horizontal 1300mm, tilted to middle 1050mm length 2,0 m x width 1,4 m Ijdpfxjd A Etro Anvoau hand and foot remote control

Condition: like new (used), Year of construction: 2019, Protec KT 3000 HV, Hydraulically height adjustable Iasdpfod Ig H Aex Anvou Load 3000 KG Manual remote control with digital display Double foot remote control Height approx. min. 700mm horizontal, height max. 1400mm Diameter face plate 1400mm Angle of inclination min. 135 Speed 0,05 to 0,6 U/min. Motor power 3 KW

Condition: new, Year of construction: 2020, 3000 Kg load capacity welding turntable, Iodpfx Ajfv Huujnvsau very robust speed infinitely variable from 0,05 to 0,7 rpm Diameter turntable 1400mm inclination up to 120 height horizontal 1300mm, tilted to middle 1050mm length 2,0 m x width 1,4 m hand remote control with digital display and foot remote control

Condition: new, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm Diameter of face plate 1400mm Tilt angle min. 135° Ijdpfx Aot Sk Imonvsau Speed 0.05 to 0.9 rpm Motor power 3 KW on request with original Siegmund perforated plate octagonal table plasma nitrided 1800 x 25 bore 28mm (surcharge)

Condition: good (used), Year of construction: 2006, Press force: 135 t Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: Iasdpfx Aey H Ilbenvju – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device – Distance from bending line to sheet support device approx. 240 mm – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short

Condition: used, Year of construction: 2021, total length: 3,720 mm, total width: 2,300 mm, total height: 2,750 mm, Colour: White Weight: 7.700 kg Price: On request - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 2102061 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 135 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 210 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3720mm x 2300mm x 2750mm (l x w x h) - Transport weight [kg]: 7700kg Iaodpfx Ansy N Aupjveu - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Iasdozd A Txjpfx Anvsu Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, Year of construction: 2001, Number of boring spindles 8 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Feed speed 36 m/min. Control Logocom Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11. The control panel was equipped with the current Simatic Panel PC677C-15" in 2021. Iaedpsy Ty H Dofx Anvou The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement. Spindle 1: Bottom / HSK Powerlock / 12,000 rpm Spindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpm Spindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpm Spindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 8: Bottom / HSK Powerlock / 4,000 - 12,000 rpm All spindles: CNC controlled (except spindle 6

Condition: excellent (used), functionality: fully functional, Equipment: CE marking, CENTAURO SL 3000 Rip Saw Cutting length: 3470 mm Maximum cutting width: 600 mm Iedpfsy Tiv Ujx Anvjau Maximum cutting height: 160 mm Saw blade diameter: 550 mm Main motor power: 11 kW Feed rate: up to 80 m/min

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Central-Axle Tipping Trailer Chassis Welded steel construction, continuous tipping shaft at the rear with 80 mm ball-type tipping bearing Front transmission support leg Foldable rear support 2 wheel chocks with holders Steel underrun protection Rear mud flaps across the entire width Quarter-shell fenders Lockable storage compartment for ramps beneath the loading area 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock Note! The side panel touches the storage compartment when folded down. Lockable storage compartment for ramps beneath the cargo area Towing Equipment for Central-Axle Trailers Towing beam with certified 40 mm tow eye Towing beam height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension SAF drum brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker compensation) Wheels and Tires 285 / 70 R 19.5" as selected by the manufacturer Iedpfx Anszd D Scjvsau Steel rims in factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to 170 bar max., without throttle valve. If necessary, this must be retrofitted to the truck. Hydraulic operation via truck PTO Hydraulic connection with SVK coupler, size 10/3, including connecting hose Tipping platforms Sturdy tipping platform with 4 mm steel plate floor, steel sidewall structure, continuous sidewalls that are fold-down and pivot-mounted with a central lock at the bottom. Rear corner stanchions are plug-in type. Rear wall folds down and is mounted on swing bearings, with a central lock at the bottom. Bed length approx. 5,000 mm; side walls with 6 hinges at the bottom. Sidewall retraction springs Bed width 2,420 mm 5 pairs of lashing eyes in the floor, 5 to each Operating Instructions The specified gross weight is technically possible; however, depending on the cargo, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Country of Registration/Plates Country of registration: Germany With DEKRA approval and certification (pursuant to §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame Hot-dip galvanized, including passivation “15-year warranty against through-corrosion” Sidewall/deck Painted in the color of your choice

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function Iaedpexmfc Uofx Anvsu - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Hydraulic press brake LVD PPEB-5 135/4000 CADMAN CNC Year of construction: 2004 Serial number: 29443 Technical specifications Force: 1350 kN Working length: 4000 mm Distance between uprights: 3150 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 12 mm/s Return speed: 115 mm/s Weight: 11,500 kg Motor: 15 kW COMMAND CONTROL CADMAN CNC 5 axes • Table PP8170 V-axis • 2 front supports PP1110 • Wila top tool clamping – hydraulic PP3100 • Back gauge X -R -V Iaodpfjy Avptox Anvsu • Distance reach X axis: 600 mm • Lasersafe security guard CE

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: 174165, MKMDK 3000 fruit washer with brush and grinder (MKMDK3000) Specifications: Performance: 3000 kg/h Dimensions: 950 x 3750 x 2110 mm Weight: 363 kg Electrical requirements: 5 kW Iajdozb Em Dspfx Anvsu Voltage: 400 V Current: 16 A Material: 1.4301 stainless steel Infeed height: 910 mm Discharge height: 1280 mm

Condition: excellent (used), Year of construction: 2000, Ref:11056 . 2000 Hunkeler VEA 520-K-HHS 3000 Endsheet Paster. For inside & outside gluing of end sheet papers, greetings cards inserts and glue-on mounts. Comprising: 1 x product feed (spare feed arm for large format products) 1 x sheet/card feed Sheet counter Iaodpfxjx Uwzns Anveu PVA cold glue system Robatech glue system Table delivery Integral compressor I.R. light beam guard Including tools & accessories. Specification: Product sizes, outside gluing, Max: 520 x 310 mm Min: 100 x 70 mm inserting/tipping-in, Max: 320 x 260 mm (with accessories) Offset gluing (for outside gluing only): - Maximum 50 mm from the fold - No restrictions in travel direction Mechanical speed, Max: 8,400 cycles/hr.

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Mounting plate: with T-slots -Length: 3050 mm -Width: 3000 mm -Height: 445 -Groove width: 28 mm Iaodpezbhn Djfx Anveu -Slot spacing: 275 mm -Dimensions: 3050/3000/H445 mm -Weight: 4000 kg

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system Isdpfezcaynsx Anveau filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm