Used Mk Rolled Lead for sale (10,352)

Condition: good (used), Year of construction: 2019, 1 used horizontal reciprocating roller grinding machine Manufacturer: Granlund Type: 650 XB Year of manufacture: 2019 Operating hours: 2905 Control: Fanuc Series 31i - B Technical data Nlsdpfxsy Nxd Te Alhec Max. workpiece length (mm): 300 Outer diameter of ring grooves (mm): 120-650 Grinding wheel diameter (mm): 356 Grinding wheel thickness (mm): 75 Tailstock quill stroke (mm): 45 Equipment: automatic grinding wheel dressing device, 2 x tailstock, paper band filter system, oil mist extraction, control cabinet with cooler, grinding wheel balancing stand Dimensions: 3800 x 2800 x 2200 mm Weight: 4500 kg Technical features It is possible to perform deep grinding on soft workpieces. This means that no pre-milled blank parts need to be manufactured or purchased, as the machine performs the entire process. The machine is equipped with an automatic grinding wheel dressing cycle, including automatic compensation for wheel diameter and cutting speed.

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Nledpfx Alew Rcrcohoc Quick-change toolholder system Multifix

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Nljdpfx Ajyurx Tslhsc Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Nedpfx Alozczvdoholc Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: new, | Interchangeable roll-off platform for construction machinery or similar | Payload approx. 14 tons | 6.50 m x 2.50 m | Tare weight approx. 2000 kg | New and immediately available | Subject to errors and prior sale. Nsdpszbuizjfx Alholc

Year of construction: 1997, condition: used, Manufacturer: G.B.P Snc ItaliaType: three-roll millMaterials: stainless steelModel: R80Year: 1997Power: 0.37 kW3 cylinders, Ø 80 x 250 mm Nodpoy D Ug Hjfx Alholc

Condition: used, mileage: 6,19,000 km, power: 301 kW (409.25 HP), first registration: 04/2016, fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, TITLE: SCANIA P410 CP16 HOOKLIFT, FRONT LEAF SPRING AND REAR AIR SUSPENSION, 6X2 REF: 25C56 YEAR: 04/2016 HORSEPOWER: 410 DISPLACEMENT: 12,742 cc EMISSION STANDARD: Euro 6 MILEAGE: 619,000 km TRANSMISSION: Automatic DIFFERENTIAL LOCK: Yes RETARDER/INTARDER: Yes AXLES: 3 (6x2) WHEELBASE: 4,300 mm TOWING: Yes ORIGIN: Imported CAB: Short and low SEATS: 2 PAYLOAD: 14,650 kg - TRUCK GVW: 26,000 kg - TRUCK + TRAILER GVW: 44,000 kg BODY TYPE: Hooklift HOOKLIFT MODEL: MULTILIFT 18.56 TELESCOPIC: Yes TILTING: No ROLLER: Vertical ADR (Dangerous Goods): Yes BODYWORK CAPABILITY FROM: 4.30 m + 0.20 m TO: 6.10 m + 0.20 m OVERALL LENGTH: 8.25 m (9.10 m with extended bar) OVERALL LENGTH WITH CONTAINER: 8.55 m (9.40 m with extended bar) ACCESSORIES: - Air conditioning - Hydraulic lines for crane and/or trailer - Front and rear clamps - Extendable bar, 0.85 m Njdpfxjxwftbo Alholc REFURBISHED: No INSPECTED: Yes TYRE CONDITION: 1st axle 100% (new), 2nd axle 30%, 3rd axle 50% PRICE: €53,500 + VAT Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales department for the latest price and terms. For further information: Loris: +39 348 477 3001 URL: #thespecialistsofhooklifts SCARRABILI AURORA Specializing in the sale and purchase of industrial and commercial vehicles, primarily in the waste sector. Experts in trucks, trailers, and hooklift equipment. Over 50 trucks and more than 150 hooklift bins and containers, with and without cranes, available for immediate delivery. E.&O.E. Given the number of listings and the level of detail provided, Aurora recommends verifying details with our sales team.

Condition: excellent (used), functionality: fully functional, Locatelli MK-CC 1200 Turning Center Turning length: 1200mm Automatic loading of stock material from a feeder 3 Duplomatic floating tool holders, guided by a template 3 upper tool holders with axial movement Option for face drilling in the material Machine control system modernized in 2023 Excellent condition Nedpjyxwpyjfx Alholc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Nsdpfxjzcpu Uo Alhslc Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 Nedpexnmb Iofx Alhjlc CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . Nledpfeiwa Hcex Alhoc -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Nodpsw Dnd Sefx Alhjlc Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Nsdpew Hpzwofx Alhslc Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. Nlodpfxey D Npie Alhsc • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls Nljdpfxey Aubue Alhoc centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 Nledpfxjy D Ngzj Alhjc plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: 4axis autocalc, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 250 mm, side roll diameter: 180 mm, roller diameter: 300 mm, roller length: 4,100 mm, working width: 4,000 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, power: 5 kW (6.80 HP), input voltage: 400 V, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, model capacity 4000x6 mm CNC EVO plate roll Hydraulic 4 roll plate bending machine used year 2017 plate thickness rolling 6 mm pre-bend 4 mm minimum rolling diameter ID 300 mm plate max width on the rollers 4100 mm top roll size 250 mm lower roll 240 mm side rolls 180 mm Power on hydraulic unit 5,5 kw Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted with CNC EVO 4 axis Automatic plate roll programmable on drawing import from CAD station Rolling compensation upon plate different yield strength data input Nlodpfx Alsy I Sp Tshec Hydraulic rotation central rolls driven Parallelism of the 4 rollers lifetime with torsion bar Pre-pinch setting upon plate real strength for best pre-bend Drop-end open front for unloading closed shells Re-rolling system for welded shells precise calibration. Safety and emergency stop installed Manuals and schematics service and instruction books

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 2,00,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Nodpfx Alsyzim Aohslc Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Rolls length 2050 mm -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll Nljdpfox Ewa Ejx Alhjc -Safety installations with emergency stop.

Condition: good (used), functionality: fully functional, Year of construction: 1991, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 260 mm, roller diameter: 260 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 8,000 kg, total length: 5,000 mm, total width: 1,500 mm, total height: 1,600 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, MCB3028 4 roll hydraulic plate bending machine capacity 3000x13 mm Make Davi Italy - year 1991 Plate width 3000 mm Plate thickness 13 mm Prebending 10 mm Nlsdpfjy T Exfsx Alhsc top roll size 280 mm pinch roll 260 mm Electric power Hp 10 380/50 Vac Configuration installed: -Hardened rolls -Conical hydraulic attachment -Digital position readouts infinitely variable speed control via hydraulic proportional joysticks hydraulic motor driven roller rotation with axial gearbox each roll central independent front open hydraulic drop-end to unload closed shells machine operating console centralized fully hydraulic -Extended rolls front shafts -one plus station hydraulic to connect a support ---- Cleaned, controlled repainted , tested Machine in optimal working conditions ready for use. CE quality certification made in Italy . Manuals and schematics original documents with the machine.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id Njdpsy Tbf Iefx Alhelc nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: used, Thread rolling machine UPWS 25. Nledpfx Aszd Rf Nolhoc

Condition: used, mileage: 2,31,613 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Mercedes-Benz AROCS 10x4/6, registered: 06/04/2021 * Automatic transmission * 5-axle vehicle * 231,613 km * 12,809 ccm * 375 kW (510 hp) * Arctic white * Technically permissible total weight: 44,000 kg * Front axle 8.0 t * Front axle, straight design * Rear axle, crown wheel 300, planetary, 13.4 t * Axle ratio i=4.333 * Leaf spring suspension, rear axle * ABS & ASR * Disc brakes on front and rear axles * Parking brake, electronic * Parking brake, additionally on the front axle * Secondary water retarder * Wheelbase * Stabilizer bar, front axle & 1st rear axle * ECE compliant * Driver's comfort suspension seat * Co-driver's functional seat * Seat covers, velour * Air conditioning * MirrorCam * Light sensor * Rain sensor * Tires/Tyres, tubeless: * 1st axle 315/70 R 22.5, 5/9 mm * 2nd axle 315/70 R 22.5, 11/11 mm * 3rd axle 315/70 R 22.5, 5/11/12/11 mm * 4th axle 315/70 R 22.5, 9/8/9/11 mm * Digital tachograph * Tachograph manufacturer: VDO * Digital radio * Speakers, 2-way system * Navigation system * Comfort telephony, wireless charging * Multimedia cockpit * Front driven axle 8t, hydraulically steered, liftable * ABS can be deactivated * Steering system, standard, electro-hydraulic * MOBAS type: HG 28-6.4 SK * Main tank 240 l, left side * Additional tank 145 l, right side * Tank 290 l, right side * Front spring 2x8.0 t, 3-leaf * Rear spring 2x15.0 t Nodjzhdkyspfx Alhjlc * Tow hitch, rear, Rockinger * Cruise control * Single PTO * All information without guarantee

Condition: used, Year of construction: 2024, color: grey, empty load weight: 1 kg, fuel type: gasoline, gearing type: other, TITLE: NEW HARDOX ROLL-OFF CONTAINER FOR AGGREGATE WITH DOUBLE-EFFECT REAR OPENING DOOR AND TILTING, RAISED BOTTOM REF.: 22-N-75 TYPE: aggregates NEW: yes LID: no OPENING: rear double effect OVERALL DIMENSIONS TOTAL LENGTH: 5.50 m + 0.20 m beams EXTERNAL WIDTH OF THE BODY: 2.50 m FRONT SIDE: 1.40 m REAR SIDE: 0.60 m SIDE SIDE: 0.30 m WEIGHT: 2390 kg BOTTOM: 6 mm WALL: 3 mm Nledpfjv Aqabsx Alhjc COLOUR: ral grey 7000The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 3 kg, first registration: 06/2024, fuel type: gasoline, gearing type: mechanical, TITLE: USED MARITIME CONTAINER WITH REAR OPENING WITH TWO FOLDING DOORS AND NEW REDONE BOTTOM REF: 24-U-89 TYPE: maritime NEW: no LID: yes OPENING: two rear folding doors OVERALL DIMENSIONS TOTAL LENGTH: 6.00 m + 0.20 m beams + 0.10 rear platform EXTERNAL WIDTH OF THE BODY: 2.50 m HEIGHT: 2.50 m WEIGHT: 3080 kg BOTTOM: wooden with 2 mm iron sheet covering WALL: iron COLOUR: pinkThe prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 Nodpfx Aev Ap U Relhjlc URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.