Used Paint Spray Booth for sale (5,937)

Condition: excellent (used), Year of construction: 2009, operating hours: 41,696 h, overall weight: 1,040 kg, load capacity: 60 kg, arm reach: 1,960 mm, controller manufacturer: ABB, controller model: IRC5, The IRB 4400 is a 6-axis industrial robot, designed specifically for manufacturing industries that use flexible robot-based automation. The robot has built-in process ware, an open structure that is specially adapted for flexible use, and can communicate extensively with external systems. Godpswp Nbcefx Ap Debu Specifications: Payload: 60 kg Arm Reach: 1960 mm Model Type: IRB4400 Controller: IRC5 Model Year: 2009 Working hours: 41969 Conditions: Used & Tested & Battery Changed & Painted Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant Contact us to request the robot working video and position repeatability test video ! We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. Gedpfx Ajwzl Hxop Djbu ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Gbedpfx Apjycctqj Dsu Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Gbjdpfxeyfim As Ap Dju Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 17/2022, A shot blasting chamber (shot blasting booth, sandblasting booth) is a specialized, enclosed space designed for cleaning and modifying the surfaces of large-sized components and steel structures. It enables the removal of rust, paint, and scale using a pressurized abrasive jet. Gjdjzlrwvjpfx Ap Djbu

Condition: new, Year of construction: 2026, CORMAK 10 bar Diesel Compressor is a modern, fully independent source of compressed air, designed for professionals who require maximum performance and mobility in the field – wherever access to a fixed electrical power supply is unavailable. The unit combines advanced engineering, European manufacturing precision, and innovative design solutions to ensure reliable operation even under the most demanding working conditions. KEY ADVANTAGES AND FEATURES 10 bar operating pressure: Optimal pressure parameters ensure a stable supply for a wide range of pneumatic tools, construction machinery, sandblasting equipment, and drilling machines. Full mobility on its own wheels: A robust running gear mounted on heavy-duty wheels allows for easy transportation and effortless movement of the compressor directly to the work site. Third jockey wheel on the drawbar: The additional swivelling wheel mounted on the drawbar significantly facilitates precise positioning and manoeuvring of the compressor on construction sites or in confined working areas. Four independent levelling jacks: Allow the machine to be perfectly levelled, even on uneven or difficult construction terrain. Opening housing panels with gas-oil struts: Provide quick and wide access to all service components, ensuring convenient maintenance and periodic inspections. Built-in brake: Enhances safety during transportation and when the unit is parked on slopes. TECHNOLOGY AND PERFORMANCE CORMAK diesel compressors are designed using high-quality components, resulting in a long service life and low operating costs: High-performance screw air end: The heart of the compressor ensures high effective output, continuous operation, and resistance to intensive use in industrial environments. Sound-insulated and durable enclosure: The robust construction with sound-insulating panels effectively reduces noise levels, improving operator comfort and minimising the impact on the surrounding environment. Advanced cooling system: A specially designed cooler combined with an efficient cooling system ensures optimal thermal conditions, even when operating under heavy loads and at high ambient temperatures. Intuitive control system: The electronic control panel enables full monitoring of key operating parameters, such as pressure and temperature, while facilitating diagnostics and maintenance planning. APPLICATIONS Construction and road construction: Powering pneumatic breakers, drills, wellpoint systems, and machines for plastering and spray painting. Service and field work: An indispensable source of compressed air wherever a 400 V mains power supply is unavailable. Heavy industry and installation work: Rapid support for production and installation processes in the field. TECHNICAL SPECIFICATIONS Parameter Specification Power 42.4 kW Air delivery 5,100 l/min Operating pressure 10 bar Drive transmission Direct drive Compressor cooling system Air/oil Oil capacity 45 L Air outlet valves 3 pcs. Battery 12 V DC – 790 A – 115 Ah Fuel tank capacity 44 L DIESEL ENGINE Gbjdpfx Apszxzcho Dsu Parameter Specification System 4-stroke Displacement 2,615 cc Number of cylinders 4 Rated power at 2,000 rpm 42.4 kW Cooling system Air Lubrication system Oil Lubrication system capacity 10.2 L

Condition: good (used), H. Köhler HK 300 S Kesternich Corrosion Testing Unit Manufacturer: H. Köhler GmbH Type: HK 300 S Year of manufacture: unknown Machine type: Kesternich corrosion testing unit / SO₂ corrosion testing chamber Test chamber volume: approx. 300 l For sale is a used H. Köhler HK 300 S corrosion testing unit for performing Kesternich or SO₂ corrosion tests according to DIN 50017 / DIN EN ISO 6988. The unit is suitable for corrosion testing of metals, coatings, paints, and components in the laboratory, research, development, and quality assurance. Technical data Test chamber volume: approx. 300 l Temperature range: ambient temperature to approx. +55 °C Humidity operation: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption: approx. 3 Nm³/h Compressed air connection: 4.5 – 7.0 bar Demineralized water connection: 2.5 – 4.0 bar Spray pressure: 0.7 – 1.5 bar Dimensions (W × D × H): approx. 1,200 × 600 × 1,750 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test sequences Temperature control Equipment Stainless steel test chamber Large viewing window Gas metering device Ventilation system Temperature control Test chamber thermometer Manometer Compressed air connection Demineralized water connection Exhaust connection Operating manual available Maintenance documents available EC declaration of conformity available Application areas Kesternich test SO₂ corrosion test Corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery Gbodpfxszg U Tis Ap Dju H. Köhler HK 300 S corrosion testing unit Operating manual EC declaration of conformity Maintenance documents Documentation Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5 Gsdpfx Ajzumxmsp Debu

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. Gbsdpfxozb I Spe Ap Dou The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: good (used), Year of construction: 2014, machine/vehicle number: M-102132-1, The technology is intended for the processing of poultry meat by spraying without the use of injection. The fillets are loaded onto the transport system, which transports them step by step to the injection part of the device. From there, it is transported to a conveyor that transports the fillets to the crate equipment. The varnish is prepared in a specialized facility with a volume of 400 liters. The waste paint is collected in a storage tank with a volume of 800 l. The storage system itself has the ability to heat or cool the liquid (as needed). Gbsdpfsk Sygnjx Ap Dou

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 220 °C, heating capacity: 33 kW (44.87 HP), workpiece height (max.): 1,700 mm, workpiece length (max.): 1,700 mm, fuel: electricity, Compact Starter Package – Powder Coating System (Oven, Spray Booth & Wagner Hand System) For sale is a complete, immediately ready-to-use starter package for powder coating. The system is delivered fully assembled (installation and assembly are not required). On-site, only electrical and compressed air connections need to be provided. 💡 Tailored Solutions & Individual Customizations: Each package can be flexibly adapted to your specific requirements, workpiece sizes, and space conditions. Whether it’s modified oven dimensions, different extraction capacities, additional transport technology, or alternative coating systems – we precisely tailor the system technology to your needs! Package Components & Technical Data (Standard Version): 1. Electric Powder Curing Oven: - Usable dimensions (L x W x H): 2,000 x 1,900 x 2,000 [mm] (dimension adjustments possible upon request) - Thermal output: 33kW (electrically heated) - Max. temperature: 220°C - Recirculating air / Fan: 5,700 m³/h (2.2kW motor) - Equipment: 2 infeed rails for trolley systems, 2 swing doors, rock wool insulation (150mm), stainless steel thermal block AISI 316 2. Open Powder Spray Booth (mobile): - Dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Extraction capacity: 6,000 m³/h (3.0kW motor) - Filter: 4 filter cartridges + 1 absolute bag filter at the top - Equipment: - Mobile 60-liter powder container - Electromagnetic valves for cleaning 3. Wagner Hand-Held Powder Coating System “Sprint 2 B” - Application: Corona / Tribo hand coating - Powder output: max. 450 g/min - Processable materials: Organic, tribo, metallic, and acrylic powder coatings - Protection class: IP 64 4. Electrical Control / Control Cabinet Godpfx Apobqk Nbo Djbu Electronic temperature control and control of the entire system

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: SLM06EC01-R1, workpiece weight (max.): 5,000 kg, This Performa Roller configuration features an entry and exit conveyor belt system and a system of rollers which feed workpieces through the spraying zone. It is equipped with 8 spray guns subdivided into 2 product circuits and a dry filtration system. It has a working width of 300 mm and is perfect for applying water and solvent-based stains and paints. 01. Performa 28 Belt has a continuous conveyor belt system for transporting workpieces and a paint recovery system. It is equipped with 8 spray guns subdivided into 2 product circuits and dry filtration. It has a working width of 240 mm and is also available in the 400 mm version. Perfect for applying water and solvent-based stains and paints.ž 02. This configuration is the ideal solution for applying 100% acrylic products. It is equipped with a continuous conveyor belt system, steel filters and a patented paint recovery system. Equipped with 6 spray guns on a single product circuit. It has a working width of 240 mm. 03. Performa Roller: roller conveyor system; working width 300 mm Performa Belt: conveyor belt system; working width 240 mm or 400 mm Performa UV Belt: for application of 100% acrylic products; conveyor belt system; working width 240 mm; patented recovery system Gsdpfswrra Tex Ap Djbu

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Gbjdpfezuzhiex Ap Deu Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Gbjdpfjz Dmnwox Ap Deu Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from

Year of construction: 2012, condition: used, functionality: fully functional, We are offering this used, fully functional MAFAC KEA spray cleaning machine, manufactured in 2012, for sale. The machine comes from a company acquisition. Complete documentation is available, and all maintenance intervals have been observed and carried out by the manufacturer. Features include a 1-tank system, 5-sided spray cleaning, a load capacity of 100 kg, and compatibility with Euro standard baskets (608 x 408 x 300). It has a heating capacity of 10 kW, an integrated hot air drying system, and a user-friendly Siemens S7 control system with plain text display. If you have any questions or require further information, please feel free to send us a message or call us. Gbedpfx Apjzg Uq Is Dou

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT10401014064, empty load weight: 1,500 kg, maximum load weight: 2,300 kg, overall weight: 3,800 kg, axle configuration: 1 axle, loading space length: 2,000 mm, loading space height: 1,000 mm, total length: 4,300 mm, total width: 2,460 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: green, - Single-axle container trailer - Type EPS 38 for diesel generator set body - Multiple units available - Please note: archive images! #Chassis single-axle trailer - Welded construction in fine-grain steel - Generator set secured by bolted connection - Reinforced front jockey wheel, mechanically adjustable in length, folding at the bottom - 1 pair of 2-speed landing legs at rear, with straight lower section, left and right operated independently - 2 wheel chocks with holders - Aluminium side underrun protection, painted RAL 6031 bronze green matt - Steel rear underrun protection, painted RAL 6031 bronze green matt - Mudguards in front of and behind the axle, with sheet-metal cover on top - With anti-spray mud flaps - 2 pairs of lashing cut-outs, 1 pair front and 1 pair rear, recessed into the cross members, each rated 3 t for loading the trailer, marked (sticker) - 4 pairs of ferry lashing eyes, marked yellow - Lashing point sticker on each lashing eye - Rosette-pattern perforated steel plate on both sides outside next to the generator set, pull-out ladder on both sides - Holder for 2 x 20 l fuel cans on the vehicle frame, right-hand side in direction of travel - Central lashing point sticker - Steel storage box at front, recessed into the floor, with drainage holes, lined with perforated rubber mat, lockable lid #Towing device single-axle trailer Gedpfx Aozazrtjp Dsbu - Drawbar with tested reversible towing eye: 40 mm / NATO eye (changed by turning) - Drawbar height-adjustable via spindle; nut for spindle mounting bolt at bottom, right-hand side in direction of travel - Parking sockets for electrics/EBS and air #Axle + suspension - BPW axle with taper roller bearings and S-cam brake - Axle/running gear laser-aligned – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushes #Wheels and tyres - 235/75 R 17.5 - Make at manufacturer's discretion - Steel rims, factory silver #Braking system - Dual-line air brake system - Spring brake actuator parking brake - 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle - Yellow connection on the left and red connection on the right in direction of travel - ABS/EBS electronic braking system with EBS connector at front, with connecting cable - EBS modulator mounted in a protected position - Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! - Vehicle stability system #Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - ADR-compliant electrics with certificate - 2 white front position lamps and reflectors - 2 white/red rear outline marker lights - 1 x 15-pin socket + 1 x detachable 15-pin coiled cable at front #Registration / plates - Country of registration: Germany - With DEKRA inspection and expert report (acc. to §13 EG-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape acc. to ECE R 048, rear only, white - Warning plate acc. to ECE-70 #Paintwork - Frame RAL 6031, bronze green matt - Drawbar in frame colour

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Gbedpfxsbuqn Hj Ap Dsu Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment available upon request. Frame * Steel welded construction with front frame curve and rear bevel * Access ramp with excavator bucket recess in the center = recess in the rear between the longitudinal beams * Approximately 2,300 mm long Integrated into the outer frame * 5 pairs of approximately 4-tonne lashing points (4 x in the low bed and 1 x on the raised platform) * 7 pairs of recessed, pull-out approximately 10-tonne lashing rings (4 x in the low bed, 1 x in the access ramp, and 2 x on the raised platform) * Standard ball-bearing swivel frame attachments * Extendable widening elements on both sides of the low bed platform with softwood boards, approximately 50 mm thick * (The track width of the construction machinery to be transported must not exceed the outer frame width of approximately 2,550 mm) * 4 pairs of fold-up approximately 10-tonne lashing rings * Arrangement: 1 pair at the front on the raised platform, inside the longitudinal beams * 1 pair at the very back in the excavator bucket recess, left and right * 1 pair at the front on the raised platform, in front of the curve, inside the longitudinal beams * 1 pair in the low bed at the rear, in front of the access ramp, in the bucket recess on the left and right. Towing device * Fixed drawbar with pivoting drawbar eye, approximately 40 + 50 mm, curved design, silent block mounting, drawbar retaining spring with tensioner * Truck coupling height from approximately 840 mm to approximately 1,030 mm PP004059B Drawbar length approximately 1,800 mm Support system * 2 automatic folding supports at the rear Axles * SAF air suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake approximately 300/200 mm, automatic brake linkage adjuster Gbedpfjz Ed Ausx Ap Dju Wheels * 12 tires 235/75 R 17.5, 141J, manufacturer according to factory selection Braking system/Suspension * According to ECE regulation R13 * Dual-circuit compressed air braking system * Braking system manufacturer Wabco, EBS system 4S3M, 1st and 2nd axles monitored RSS/RSP * Stability program * Spring-loaded parking brake on 2nd and 3rd axles * Steel air tank * Brake/air connection lines with 2 single coupling heads, yellow/red EBS/ABS connection cable * Rubber band as a holder for EBS and electrical plugs * Air suspension with raising and lowering device (only on rear axles), automatic adjustment of the driving level from 15 km/h (RTR), with axle stop on the front axle Floor * Softwood floor, approximately 50 mm thick, impregnated, protruding approximately 5 - 10 mm above the frame Steel tear plate cover over wheels Ramps * 2 foldable, one-piece, lightweight steel access ramps * Length approximately 2,800 mm, width approximately 750 mm, with hardwood floor approximately 35 mm, impregnated * Ramps can be shifted in width from an intermediate distance of approximately 350 mm to a maximum overall width of approximately 3,000 mm * Ramps can be locked in the driving position by chains with tensioners * Ramp lifting aid with coil spring * Ramps can be shifted manually from the side with a rod * Square ribs welded on the outside on the ramps and rear access ramp Painting * Steel granulate cleaning * Hot-dip galvanizing * Multi-layer epoxy zinc phosphate primer and spray painting with 2-component polyurethane * Topcoat chassis = RAL 3002 carmine red *

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Gedpfx Ajz En Axsp Debu Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, machine/vehicle number: 008648, Max. working width: 1300 mm Max. working thickness: 60 mm Extraction system: dry Number of painting guns: 4 Gjdpfx Apszmmuls Debu Use: for paint

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Gbjdpfx Apsi Ri Euj Dju Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A-240601 en A-260302, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 12 mm, overall weight: 900 kg, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 6 A, year of last overhaul: 2026, cutting height (max.): 125 mm, conveyor belt width: 310 mm, Machine information: A-240601 Total machine length: 1.4 meters Total machine width: 0.7 meters Total machine height: 2.0 meters Infeed height: 1.2 - 1.8 meters Machine working height: 1.0 meter Cutting thickness: 12 millimeters Machine capacity: 1250 loaves per hour. Electrical information: Connected load: 400 volts, N+PE. Power consumption: 2.5 kilowatts. Plug type: CEE-form 5-pin 16 Amp (round red plug). Compressed air required?: No Minimum and maximum product dimensions: Product length: from 150 to 350 mm. Product width: 170 mm. Product height: from 40 to 125 mm. Machine description: This cake slicer has been fully overhauled. It was completely disassembled, grit-blasted, and sprayed with a durable 2-component coating. Following this, the machine was entirely rebuilt. It features new bearings, a new drive motor, and a renewed and improved electrical system according to the latest state-of-the-art technology. The machine is mounted on wheels. The product pusher allows you to push the final loaf through the blades. This machine is in excellent condition! The machine is suitable for slicing types of bread without fruits. This machine is mounted on 4 castors and is easy to move. It includes an oil reservoir to apply slicing oil to the band blades. Object A260302 Refurbished semi-automatic (manual) packaging line equipped with a blowing table, Kwik Lok brush machine, and clip-closing machine. Semi-automatic (manual) painted packaging line equipped with a Kwik Lok brush machine, type 1082, a Kwik Lok clip-closing machine, type 871A, and a bag-opening blowing table. Machine direction of operation: left to right Machine information: Total machine length: 3.5 metres Total machine width: 1.5 metres (including blowing table) Total machine height: 1.8 metres Working height: 0.9 metres Length of conveyor section: 1.8 metres Length of roller conveyor: 1.0 metre Conveyor flight spacing: 305 mm Machine capacity: 1800 packages per hour Electrical information Gsdsz Eud Aepfx Ap Dobu Power supply: 400 V, N + PE Connected load: 1.2 kW Plug type: CEE-Form, 5-pin, 16 A (round red plug) Compressed air required: No Minimum and maximum product dimensions Product length: 100–350 mm Product width: 80–210 mm Product height: 40–160 mm Machine description: The frame and both (2) leg assemblies are manufactured from painted profiles, manufactured by Waterlander. The machine is equipped with a Samach brush machine and a Kwik Lok clip-closing machine, suitable for Kwik Lok JNRP clips and Schutte clips. At the end of the packaging line, a 1-metre-long roller conveyor is provided for manually removing the packaged products. The machine is mounted on wheels and is equipped with conveyor flights with a fixed transport speed. The machine is fitted with a completely new control system and has been fully refurbished. The machine is finished with a two-component high-durability topcoat. The machine is suitable for packaging food and non-food products in plastic bags. Included: with the machine, a painted Hoba blowing table, stainless-steel top face, and product guides.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,300 h, functionality: fully functional, power: 55.16 kW (75.00 HP), first registration: 07/2023, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, 4-cylinder Perkins diesel engine 404J E22TA, 97/68/EC emission stage 5 With 75 hp / 55 kW at 2,800 rpm Cruise control for transport and work mode Permanent hydrostatic all-wheel drive with 2 gear stages (Sweeping mode: 0-19 km/h, driving mode: 0-40 km/h) – 65 liter diesel tank VEHICLE COMPLETELY DISPENSES WITH AD BLUE AND STILL HAS THE LATEST EMISSION TECHNOLOGY STAGE V In addition, the installed engine has camshafts, therefore, a costly timing belt repair, approximately every 70,000 km or 1000/1500 operating hours, is eliminated! Furthermore, please note: · Service interval list with long inspection intervals only every 500 operating hours - Comfort cabin with center seat (1-man cabin) incl. heating - Driver's seat = ISRI health seat with integrated 3-point safety belt Belt guide on the right, stepless backrest tilt adjustment, lumbar support, seat heating switch, armrest, seat contact switch, adjustable headrest, automatic adjustment of the seat to the driver's body weight (see also attached certificate) - Air conditioning with ventilation and defrosting system - Radio with Bluetooth hands-free system, USB port, MP3 player - All-season tires 255/65 R 16 incl. fender extensions, M+S - Heated wide-angle side mirrors Gbsdszdz R Aopfx Ap Dju - Joystick control with 4.3" screen - Sweeping kilometer counter and sweeping hour counter - Reading light - LED work spotlight at the front of the cabin - Suction pipe - Fresh water tanks 200 l incl. filling connection Storz C coupling - External starting device - LED rotating beacon - Warning triangle, vest, first aid kit - Safety warning flashing light for external use - Integrated reversing camera incl. 7-inch color screen - infrared night lighting, Viewing angle approx. 135°, and additionally suction nozzle camera, incl. LED suction nozzle spotlight additionally, switchable - Standard paint RAL 9016 white - Water high-pressure system 160 bar - 11 l/min, incl. 8 m hose and hand lance (already installed) - HD lance with 90° swivel head for comfort cleaning (already installed) - Central lubrication strip block Sweeping material container with 1.5 m³ gross, 1 m³ net according to DIN EN15429-1 container volume - Discharging height sweeping material container 1,660 mm - with cleaning flaps and circulating water level indicator - Container made of high-quality, rust-resistant aluminum 200 liters of recycled water and 200 liters of fresh water Straight steel pipe as central suction Suitable for sweeper, scrub deck and for mowing Multi-purpose separating screen for efficient dirt separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Deflector plate with rubber coating (wear protection) Hydraulic quick-change coupling (Faster coupling), single-lever operation Rear underrun protection Shovel and broom holder Sweeping unit with hydraulic tilt adjustment of the right broom Hydraulic pressure regulation / relief for front sweeper broom, adjustable on the control armrest Sweeping width: 1,190mm to 2,400mm Quick-change suction nozzle Hydraulic coarse dirt flap Mixed bristle pattern Stepless broom speed adjustment 0-150 rpm Dust reduction through 2 spray nozzles per roller brush Automatic collision protection Changes, typing errors, errors and prior sale are subject to change. All information is provided without guarantee. The sale is made without any guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Gjdpfoz Izquex Ap Dsbu Repositioning cylinder 4 tool cassettes

Condition: used, This listing is for Wescor 7151 Aerospray Pro Slide Stainer. The unit is in full working condition and ready for immediate use. Gbodpfoza Dnqjx Ap Dsu This advanced dual-purpose automated stainer and cytocentrifuge ensures superior cell preparation, rapid turnaround times, and reliable cross-contamination prevention. Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1]()] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)