Used Power Pack 5 V/10 A for sale (1,19,360)

Condition: ready for operation (used), Alsthom Parvex NFC 53 220 / AMS 2300515 Power Supply,used, minor signs of wear, 100% functional, scope of delivery as per photos Dksdpfx Aotqa T Rja Nol

Condition: new, Brinkmann Pumps SBG1102-V-Z+095 Pump No., unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dodpfjk Shwrsx Aa Nekl

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module SN EA5615355 the article was checked and tested! ,used, normal traces of use, 100% functional, scope of delivery according to photos Dkedpfx Aaenkqyws Nsl

Condition: ready for operation (used), Adept VJI ASSY 10332-00500 Rev. A card, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Dkedpoi D Tt Nefx Aa Nol

Condition: ready for operation (used), Indramat Rexroth MAC090B-0-JD-1-B/110-A servo motor SN: MAC090-24745, used, minor signs of wear, 100% functional, scope of delivery as per photos Dkjdpolmta Tefx Aa Nol

Condition: new, Siemens 6SL3210-1SE23-8AA0 Power Module 340 Version: F SN:T-X91712000035, unused, 100% functional, scope of delivery as per photos Dkedpjxahbmefx Aa Nol

Condition: ready for operation (used), Grundfos SPK4-15 / 5X A-W-A-CVUV submersible pump SN:64410798602 with MG71A2-14F85-B motor, used, normal signs of use, 100% functional, scope of delivery as per photos Dsdpfolcf N Ejx Aa Nekl

Condition: ready for operation (used), Siemens 1FT6062-6WK71-3AG1 synchronous servo motor, SN: YF N214 5683 10 001, used, normal signs of use, 100% functional, scope of delivery as per photos Dsdpfx Aaji D Tkns Nekl

Condition: new, Rexroth MAC090C-1-GD-4-C/110-A-2/WI521LV/S013 Permanent Magnet Motor, SN MAC090-48116, after overhaul by the manufacturer, unused in opened original packaging, 100% functional Dsdpfoi D Nf Hsx Aa Nokl

Condition: ready for operation (used), Siemens C79451-A3247-B71 SICOMP M26 Power Supply SN C1 039001, used, 100% functional Dkodpfx Aoxahmcsa Nel

Condition: ready for operation (used), Siemens 6FC5410-0AA00-0AA0 CPU 810D CCU1 Version: A SN:UC0001370, used, minor signs of wear, 100% functional, scope of delivery as per photos Dodpfx Aern Enhoa Nokl

Condition: ready for operation (used), Fanuc A06B-6087-H130 Power Supply Module Version G SN:V01519990, the rear connection cover is missing, see photo, used, normal signs of use, 100% functional, scope of delivery as per photos Dedot Nbzrspfx Aa Njkl

Condition: ready for operation (used), Grundfos SPK2-15 / 8X A-W-A-CVUV submersible pump SN:64812211001 with MG71A2-14FT85-B motor, used, normal signs of use, 100% functional, scope of delivery as per photos Dedpelcf Nzjfx Aa Nskl

Condition: ready for operation (used), Siemens 6EW1110-5AE power supply built-in power supply unit. A 3103721, used, normal signs of use, 100% functional, scope of delivery as per photos Dedpei Edv Nsfx Aa Nokl

Condition: ready for operation (used), Indramat MAC63C-0-MS-1-C / 95-A-0 / J1000 permanent magnet three-phase servo motor SN: 17285, housing broken off from connector, function not affected ,used, normal signs of use, 100% functional, scope of delivery according to photos Dsdpei D Irtjfx Aa Nokl

Condition: new, Siemens Teleperm M 6DS1731-8AA E4+5 with C79458-L439-B8, unused, 100% functional, in opened original packaging. Dksdpfexahxxox Aa Nel

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation water, and ventilation testing Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W Dkedpexnyqvsfx Aa Nel - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Dkedpfx Ajxf Sn Ija Njl Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: new, B&R 0PS3200.1 Power Supply / Power Unit SN: AF651013330 - 3-phase / 24VDC / 20A, unused in opened original packaging (protective film still sealed), 100% operational, scope of delivery as per photos. Dkedox Ht A Espfx Aa Nol

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor Dsdpfx Asnzhxqea Nekl B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Dkjdefbmqtjpfx Aa Nol Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit No. 1 Cross aggregate with No. 4 horizontal boring spindles

Condition: ready for operation (used), Heidenhain / zentro-elektrik VSNT 400 / 8610-1 Power Supply SN:100647, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Dkodpfx Aasx Err Ns Njl

Condition: ready for operation (used), Siemens 6AV7671-4AA01-1AV0 display Sicalis-PMC7 V2 HBF F-Nr L P1100510918 10 E-Stand A A5E00073821 + 1x key without hard drive, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dkjdpfx Aex Euqboa Nsl

Condition: ready for operation (used), Siemens 6AV7671-4AA01-1AV0 Display Sicalis-PMC7 V2 HBF F-Nr L P1100510918 10 E-Stand A A5E00073821 + 2x keys + SP0842N, used, normal signs of use, 100% fully functional, scope of delivery as per photos. Dkedjx Euqhspfx Aa Nsl

Condition: ready for operation (used), Bosch SM 10/20-TC servo module SN:481559, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Djdpfx Aex Eqylsa Njkl