Used Pratt Burnerd Clamping Chuck for sale (12,569)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 14,900 W, number of axes: 4, This 4-axis HAAS ST-15Y was manufactured in 2022. It features a maximum spindle speed of 4000 rpm and a spindle power of 14.9 kW. The machine has a workpiece diameter over the bed of 419 mm and a maximum cutting length of 406 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15Y horizontal turning machine we have for sale. Contact us for further details. • Capacities • Chuck size: 210 mm • Max part swing: 419 mm • Max cutting diameter (BOT or VDI turret): 305 mm • Max cutting length: 406 mm • Bar capacity: 64 mm • Feedrates (rapid) • X-axis: 12.0 m/min • Y-axis: 12.0 m/min • Z-axis: 30.5 m/min • Axis motors (max thrust) • X-axis: 10,676 N • Y-axis: 10,231 N • Z-axis: 16,458 N • Spindle • Spindle nose: A2-6 • Spindle bore: 88.9 mm • Max spindle torque: 203 Nm at 500 rpm • Main spindle C-axis Kdodpfx Adjzlr I Isljt • C-axis power: 3.7 kW • Max speed: 60 rpm • Positioning accuracy: ±0.02° • Brake clamp force: 4448 N • Brake diameter: 366 mm • Brake holding torque: 190 Nm • Control: Interpolated motion and positioning • Turret and tooling • Number of turrets: 1 • Number of tool slots: 12 • Tool taper: VDI40 • Rotating tools: Yes • Live tooling speed: 4000 rpm • Turret configuration: 12-position VDI turret • Tailstock • Type: Hydraulic tailstock • Quill travel: 95 mm • Manual body positioning: 508 mm • Thrust range: 623–5027 N • Coolant and air • Coolant capacity: 114 L • Air required: 113 L/min at 6.9 bar • Electrical • Input AC voltage (3-phase high): 440 VAC • Full load amps (3-phase high): 20 A • Full load amps (3-phase low): 40 A • Configuration notes • C-axis: Yes • Y-axis: Yes • Driven tools: Yes • Counter spindle: No • Power-on hours: 4,500 h Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Kedpfstigw Tex Adljdt -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

Condition: ready for operation (used), L & Z Lathe / WEILER CONDOR VS 2 with new 3-axis digital readout from training workshop - 3-axis digital readout "NEW" - Center height: 165 mm - Swing diameter over bed: 330 mm - Center distance: 800 mm - Speed range: 28 - 2800 rpm - Automatic longitudinal / cross feeds - Spindle bore - Tailstock with center - Collets / quick-clamping device incl. 25 collets Ksdpfx Asy Ral Ijdledt - 3-jaw chuck Röhm 200 mm with reversible jaws - Multifix / new with insert - Work light - Emergency stop - Bed stop - Machine feet - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 2007, The Emco Maxxturn 45 SM is in good condition and is still used in production daily. It was mainly used to manufacture parts made of plastic. Spindle hours: only 23,848 hours. Approximately 6 months ago, the machine control panel with display and the air conditioning unit were replaced. Last maintenance: 04/2026, geometry was measured. It can still be inspected in production until week 39/2026. Kdedpfx Aezyyp Aodlot Technical data: Control system: Siemens 840 D. Main spindle: Speed 6,300 rpm. Counter spindle 6,300 rpm. Spindle bore max. 45 mm 2 x C-axis, 0.001° High-pressure coolant system at the tool turret. Chip flushing for counter spindle. Sauter tool turret with 12 stations, VDI25. All stations for driven tools Speed range: 6,000 rpm. Travel in X/Z axis 160/510 Accessories: Chip conveyor Knoll High-pressure coolant pump. Finished parts collector. Interface for bar feeder. New control cabinet air conditioning unit LED signal lamp, 4 wedge shoes, machine documentation. Machine keyboard with cover. 8 rigid tool holders VDI 25 Optional: like-new three-jaw chuck for main spindle and counter spindle with draw tube adapter Optional: short bar loader magazine Emco LM800. The tools and clamping devices shown in the picture are not for sale.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrink fitting machine for the precise and rapid shrinking of tools in shrink chucks. The device is ideally suited for use in CNC machining, toolmaking, mold making, and modern cutting processes. Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make the device an efficient solution for daily tool preparation. Kedpfjzu Ikkjx Adledt Features: Manufacturer: Komet Type: ISG3100 Induction shrink fitting technology Fast heating of shrink chucks Simple and safe operation Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity accuracy of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-part production with various holders from HSK30 to HSK100 Used, fully functional. Shows signs of wear consistent with its age.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Kdjdpezx Nzfsfx Adlet Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2005, functionality: fully functional, CNC machining center Hedelius BC 100-2500 Control: Heidenhain iTNC 530 Year of manufacture: 2005 Internal machine no.: 59 Travel distances: X-axis: 2,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping surface: 3,220 x 1,000 mm Table load capacity: approx. 3,000 kg Spindle taper: SK 50 Tool magazine: 30 stations Kedpfx Adsy Ryw Dsledt Spindle speed: 20 - 5,000 rpm Accessories - Coolant filtration system 900 l - Internal cooling - Chip conveyor - Electronic handwheel - Partition for pendulum machining - Magnetic chuck 2x 1,000 x 800 mm - Table probe TS27R - Prepared for touch probe

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW Kdjdpsvwgagsfx Adlst located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,041 h, spindle speed (max.): 2,800 rpm, controller manufacturer: SIEMENS, controller model: SIEMENS 828D, number of axes: 2, This Romi C 510 was manufactured in 2014. It has a hollow spindle with a Ø 65 mm spindle passage, a wedge bar manual chuck Ø 260 mm, and hardened guide surfaces. The tool holder is a Multifix steel holder head B K22. The machine operates at a standard spindle speed range of 56–2800 rpm and has automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, consider the Romi C 510 that we have for sale. Contact us for more information. Additional equipment • Console: Automatic cycle in the longitudinal direction with activation of console recess. Machine Benefits Technical Machine Benefits • Automatic features: tool clamping, hardening of guide surfaces, switching of milling spindle speed, frame cycles, and lubrication of guide surfaces. • Special versions: fully equipped, manual speed control, reduced speed range, manual tightening, numeric indicator for foreign production, and climate-controlled version without a control system. • Guide surfaces: hardened and plated counter surfaces. • Climbing milling: automatic device included. • Automatic tool clamping Kdedpsx D I Iuefx Adlst Extra Information Special Machine Versions: Raised milling headstock, automatic frame cycles, and compliance with foreign standards by agreement.Maschinenbeschreibung:CNC-Horizontal-Drehmaschine - ROMI C 510 V5.0 – SIEMENSStandardausführung:. Siemens-Steuerung 828D sl, mit 10,4” LCD-Farbmonitor. ASA A2-6" Spindelkopf, Drehmoment: max. 303 Nm bzw. ASA A2-8", max. Drehmoment 408Nm, mit 520mm Schwingdurchmesserüber Bett, 450 mm Schwingdurchmesser über Schlittenführung und 255mm Schwingdurchmesser über Planschlitten. Reitstock mit manueller Positionierung des Grundkörpers, mit manueller Betätigung der Pinole (stehende Zentrierspitze) MK-4. Eilgang längs/quer mit 10.000mm/min. Herausziehbarer Spänewanne. Elektroanlage lieferbar für folgende Spannungen/Frequenzen: 400VCA / 50-60Hz. Abgedichtete Arbeitsraumleuchte. ROMI RMMP manuelles Maschinenpaket, bestehend aus CNC gesteuertem Hauptschlitten mit zwei  elektronischen Handrädern für X- und Z-Achse, Joystick-Schaltern und der  bedienerfreundlichen Siemens Software "Manual Machine Plus". Adapterplatte Multifix K22 Type B mit Multifix Stahlhalterkopf B K22. Schleppeinrichtung für Reitstock. Automatische Schmierung mit Inline-Filter und Füllstandsensor. Kühlsystem, komplett mit Kühlmittelbehälter und Kühlmittelpumpe (10l/min,@7bar, 1,5kw/ 2cv). Kühlwasser Spritzpistole mit zusätzlicher Pumpe. Elektrischer Schaltschrank mit Kühlung über Zentrifugalgebläse und Überdruck. Spritzschutz, komplett, Schutztüre mit Sicherheitsfenster und Verriegelung durch elektrische Sicherheitsschalter. Schrauben und Muttern für Nivellierung. Schraubwerkzeugsatz für den Betrieb der Anlage. Vollständige Dokumentation für das ROMI-Produkt auf CD. Standardlackierung: Epoxidlack strukturiert Munsell-Blau 10B-3/4 und Epoxidlack strukturiert grau RAL 7035.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: AA1/016854, functionality: fully functional, 3-AXIS DRILLING & MILLING CENTER Make: SCM Model: TECH Z2 Comp R0410.01 Serial No.: AA1/016854 Year: 2012 (Photos taken before overhaul, functional testing, and cleaning) MAKING CAPACITIES: - Max. workpiece height (thickness): 160 mm - Max. workpiece length: 2700 mm Dual station: 1210 mm - Max. workpiece width: 1300 mm Movements: - X-axis travel: 3060, Y-axis: 1735, Z-axis: 250 mm - Max. travel speed (vector: 60 m/min) MACHINE COMPOSITION: - 6 Pneumatically clamped beams for suction cups, e.g., 120x120 or 55x120 mm - Unit Automatic lubrication - Mounted unit on the neck of the sign composed as follows: (X movements by rack and pinion, Y movements by screws and bushings; high-quality precision linear guides with automatic lubrication) • 11 kW (15 HP) milling/routing unit: - Rotation 1500 - 24000 rpm, variable speed, right/left direction - Tool holder connection type HSK63F, ER32 collet - Onboard magazine for 8 tools - Perimeter extraction hood • 18-chuck drilling unit: - 12 independent vertical chucks (8 in the X direction, 5 in the Y direction) - 6 horizontal chucks (4 in the X direction, 2 in the Y direction) - Center distance between chucks 32 mm for M10 / Ø11 mm drill bits - Rotation speed 4000 rpm - Pneumatic vertical stroke 60mm - Perimeter extraction hood • Integrated unit for groove sawing and milling - Ø120mm blade, 6mm thick - 6000 rpm speed - 60mm pneumatic vertical stroke • Mobile console on a jib with a control PC: – Windows XP operating system – 17" LCD screen – Ethernet connection – Xilog and Maestro machine interface software OTHER FEATURES: - 400V overall power supply. Three-phase + N+T 50Hz IN37A - 12 kW electro-spindle motor - 2.2 kW drilling/grooving motor - 1 x 2.4 kW vacuum pump: 90-108 m3/h - Pneumatic supply >=7 Bar - Suction: Suction inlets: 2 x Ø 150 mm (1 x Ø 200 mm inlet using the installed bypass) Recommended speed: 30 m/s - 3400 m3/h - CE-compliant machine with safety zone and light barrier Kdodpfxsv Tzrvj Adlst Operating dimensions with safety zone: see documentation excerpts Shipping dimensions: to be specified when preparing the equipment Estimated total weight: 2200 kg Machine supplied with instruction manual and software, spare parts list, electrical and pneumatic diagrams. Please contact us for the supply of consumables, accessories, and/or vacuum systems. Machine serviced and brought into compliance, with quality control and dynamic functional testing. 3-month warranty and compliance certificate. Available from stock, subject to prior sale. Prices excluding VAT. Delivery and additional services upon request.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev Kdedpfx Aowthbijdlet >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, EDM 313MF30-SLM, Year of manufacture 2008/2023 Technical data: Adjustment travel XxYxZ 620x420x400mm workpiece clamping table 1000x600mm tank size 1070x670mm Filling height of the working tank 400mm distance table-electrode holder 150/550mm Workpiece weight max.1500 kg Dielectric min. 1200 L dimensions 2550x2430x2500mm Weight of the machine 3900 kg Kdjdemx Slhjpfx Adlst Equipment: - color: aluminum metallic (silver) - new electrical cabinet - lifting speed (highjump) 15m/min. - contact protection new - cooling unit Termogamma TG13/14 - linear scale in all axes - C-axis 100rpm, direct measurement 0,0001 Holding brake - chuck EROWA ITS/Hirschmann/3R - Cartridge filter system - User interface MF30 V.3.0 - Exopuls+ 60A Rev. 4 - New ball screw, bearings, couplings - Screen Automation Touch Panel - Hand control panel with enable button - Pumps, filling - filter - and spraying pump - New maintenance unit with digital pressure switch - New valve terminal - Table revised (steel) - WZW 6-fold, option 20/30-fold - Co2 extinguishing system - Warranty 12 months - Transport - IB on site - Training

Condition: used, length 900 mm Kodpswth Tfefx Adlodt width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9062

Condition: used, Technical details: diameter: 400 mm passage: 25 mm width: 58 mm revolution per minute: 1800 U/min weight of the machine approx.: 48 kg Kedpfx Aju Nlpbedlodt Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø 235mm Force tension 40kN Guide on one jaw is broken (see picture) *

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Kedpfjw U Eg Rjx Adljdt Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 106 ohne Flansch mm weight of the machine approx.: auf Anfrage kg dimensions: Ø 250 x B: 140 mm Kjdpsu Nlatofx Adljdt three jaw chuck made of steel incl. chuck key inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm on Sale with or without flange! i.D. *

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism LxWxH 850x1000x1050 mm Kdsdozk Nupjpfx Adlot Weight approx. 240 kg Availability: at short notice Storage location: Flörsheim

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Kedpjy U Nqnjfx Adljdt

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Kodpoy Sak Tjfx Adledt Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00500000321, turning length: 2,000 mm, turning diameter: 630 mm, spindle speed (max.): 4,000 rpm, spindle bore: 118 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, total height: 3,500 mm, total length: 10,000 mm, total width: 5,000 mm, overall weight: 20,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 160 A, nominal power (apparent): 110 kVA, operating hours of spindle: 14,700 h, Equipment: chip conveyor, DMG CTX GAMMA 2000 TC CNC Turning and Milling Center - Please note: the spindle operating hours may increase slightly! - Swing diameter: 630 mm - Distance between centers: 2260 mm - Max. workpiece weight (chuck jaws/chuck weight): 250/150 kg - Max. workpiece center of gravity from the spindle flange: 250 mm - Travel range B1: 240° Kdsdpfxjzxxhhe Adljt - Travel range Z2: 1910 mm - Travel range Z3: 1910 mm - Steady rest clamping range DW: 45 - 310 mm, weight: 152 kg - Steady rest width C: 145 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 500 mm - Bar diameter: 102 mm - Diameter of the front bearing: 160 mm - Tool holder: HSK 63 A - Includes a 36-position tool changer The machine is equipped with a tailstock, an automatic steady rest from SMW AUTOBLOK, and a three-jaw chuck from SMW, diameter: 300 mm. It also includes additional jaws, another chuck, a chip conveyor, and a coolant system. Please note: the machine can be transported on a truck with a width of up to 3000 mm. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for power chucks, 4 sets -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 330/230/H105 mm Kdodpslg H Naefx Adljt -Total weight: 27.5 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,688 h, functionality: fully functional, machine/vehicle number: G3138-0826, turning diameter over cross slide: 375 mm, turning diameter: 590 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 750 mm, controller model: Fanuc 21i-T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed max.: 3,000 rpm Turning diameter over bed: 590 mm Turning diameter over slide: 375 mm Distance between centers: 750 mm Spindle bore: 78 mm Travel in X-axis: 220 mm Travel in Z-axis: 750 mm MACHINE DETAILS Control model: Fanuc 21i-T Power: 22 kW Operating hours: 1,688 h Shipping weight: 6,100 kg EQUIPMENT Three-jaw chuck Chip conveyor Turret Kedpfx Aezza Uusdlodt CE marking

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Kodpfxjzd Hnte Adljdt Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 Kdedpfx Adjt Ei Huslot 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: ready for operation (used), Year of construction: 2005, operating hours: 32,000 h, Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment. Kdsdpfx Aoy Ax T Uodlst