Leadscrew/feedscrew lathe/Condor VS 2

WEILER CONDOR VS 2

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 -Condition: “Good” Fpjdpfx Apjzvy T Tj Dsn -Maximum turning diameter: 165 mm -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Fedpfxou Nc Rio Ap Dspn Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1982, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1982, with a three-jaw chuck, Multifix system, and collet chuck assembly including a set of collets. The machine is in good, operational condition and can be demonstrated under power by arrangement. Fpodpfxezq R Ane Ap Djn

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock Fsdpfx Aezn Rahop Depn -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws -Collets / quick-change chuck incl. collets -Drill chuck / rotating center -Bed stop -Chip guard -Coolant system -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Fjdpfx Apezgcp Sj Dspn Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Fpodew Rcrcopfx Ap Dsn Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: new, Model Name Fedpfx Asgvqxtop Djpn FALKEN R 1

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Digital measurement Fjdpfoqgdkiox Ap Dopn Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: new, Year of construction: 2025, functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Precision 6-ball chuck Accuracy: 0,005 mm Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Fpsdpfx Aenacu Dop Don Grinding angles: 13° - 62° Main dimensions: W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Fpjdpezq R Ecofx Ap Dsn Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition.