Used Schauenburg Cyclone for sale (243)

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment. Podpoxcnxdsfx Aphogr

Year of construction: 1990, condition: good (used), Short/ Nest Line Podpfsn Arzksx Aphogr Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult 13. El Cabinet 14. Automatic packing Unit

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. Psdezht H Repfx Aphsgr • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum Psdpfxjffphbj Aphegr -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum Pgodpfx Apoffphcohsr -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 40,000 kg, tire size: 325/95R24, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, StreamSpace, Mercedes PowerShift 3, long cab, 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, aluminum fuel tank, green environmental sticker. Wheelbase: 3600 mm, 8t front axle, rear axle planetary gear 16t, crown wheel 300, electronic braking system with ABS and ASR, ABS switchable, drum brakes on front and rear axle, stabilizer on front axle, condensate monitoring for compressed air system, electronic parking brake, smoker package, seatbelt monitoring, lower comfort bed, construction site dust filter, electric lifting roof, prep for upper comfort bed, reversing warning system, StreamSpace, light sensor, economy/power driving programs, Mercedes PowerShift 3, PowerShift Advanced, multimedia radio with touch display, classic dashboard, tank capacity: 320l + 480l, transmission oil cooling, LED daytime running lights, high performance engine brake, protection plate under bumper, cyclone pre-filter for coarse dust, Grounder, PTO MB 131-2c pump. Export only! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted! Pgodpeyrt Siofx Apher

Condition: used, mileage: 8,29,404 km, power: 340 kW (462.27 HP), first registration: 06/2016, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XF 460 SC ICE WHITE Automatic temperature control and air conditioning Cab interior trim color: Earth White work lights Front mirror Basic immobilizer Upper bunk for luggage storage Tail lights with bulbs Stabilink rear axle suspension Halogen headlights Rear: 13.00 t, air suspension, SR1344 Traction control (ASR) Drive rear axle with disc brakes Front underrun protection Catwalk step on the left AdBlue tank 90 liters on left fender Passenger seat: Basic Fuel tank left side Front axle 1, 8000 kg, load index 156 Rear axle 1, 13000 kg, load index 149 Door trim made of fabric Pgsdpfeyz Hd Esx Aphsr Soft-touch steering wheel, black Electronic Stability Control (VSC) Fog lights Electric windows Pollen filter Brake system EBS-3 Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS interface Driver Performance Assistant Storage compartment for trailer connections Central locking 24V sockets 2x7 pins + EBS, cabling 2x7 pins w/o EBS External sun visor, smoke gray, translucent Truck navigation radio, 6 speakers Air-suspended cab Rear axle 1: 315/80R22.5 Reversing warning system Digital tachograph, VDO Engine MX-13, 340 kW/462 HP. Cab badge: 460 Aluminum fuel tank 620 l, height 620 mm ZF intarder Alcoa Dura-Bright aluminum wheels 32 mm Auxiliary power supply 12V/20A, 24V/2x15A+2x40A Batteries in rear overhang, no spare wheel holder 12-speed AS Tronic 12AS2330 DD, 15.86-1.00 Front axle 1: 385/65R22.5 Eberspächer auxiliary air heater with timer Emission standard Euro 6 Top air intake with cyclone filter Space Cab - cab AS Tronic transmission, 12 speeds Wheelbase 3.80 m / rear overhang 0.99 m Front: 8.00 t, parabolic, standard, 165N, one ride height M8870 Ice white Coolbox or refrigerator Extra-long catwalk with step Xtra Comfort mattress lower bunk PTO NAS/10bc-40/17/27 DAF Night Lock Truck phone Cab interior design, Argenta Driver's seat: Super Air Analog bodybuilder signals and warnings Rear axle ratio 2.79 Axle load monitoring Aluminum air tanks Adaptive cruise control with FCW and AEBS Signal horns, 2 sets Armrest driver's seat Lower bunk with 65-liter drawer Antennas: AM/FM, 2x GSM, GPS. Extra: CB Lane departure warning system ADR certificate CB radio speaker 2 beacon lights on lamp bar 2 flashing beacon lights 2 work lights behind driver cab, on top Schoch chrome lamp bracket 4 Hella blue-light H1s for Schoch lamp bracket Bycool compressor rooftop parking cooler 24V NATO socket on chassis / batteries in rear Compressed air gun in cab CB radio 40 channel Cold power socket for coffee machine Tipper hydraulics incl. separate tank 200l (factory only) Compressor

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, traction control, - Airbag - Autoradio - CD - Power windows front - PTO - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights QUICK HIGHLIGHTS ✔ Factory-New Mercedes-Benz Arocs 4140K 8x4 Pgjdpfjy Rucusx Aphor ✔ Genuine German MEILLER H436 Rear Tipper ✔ 20 m³ HARDOX 450 Steel Body ✔ Proven Mercedes-Benz OM460 EURO-3 Engine ✔ 394 HP | 1,900 Nm Torque ✔ Mercedes PowerShift 3 Automatic Transmission ✔ Heavy-Duty Mining & Construction Specification ✔ Cooling Package for Hot Climates ✔ Cyclone Dust Filtration System ✔ Ready for Immediate Worldwide Export Built for Maximum Uptime Every hour a truck stands still costs money. The Mercedes-Benz Arocs 4140K has been engineered to keep working in the world’s toughest operating environments. Whether transporting rock in a quarry, moving sand on construction sites or supporting large mining and infrastructure projects, this dump truck delivers the reliability, durability and productivity professional operators depend on every day. The heavy-duty 8x4 chassis, powerful Mercedes-Benz driveline and genuine German-built MEILLER tipper body are designed to perform under continuous heavy loads, both on- and off-road. Engineered for Mining, Quarry & Construction This is not a standard road truck fitted with a tipper body. The Arocs 4140K is a genuine construction truck built for demanding industries where reliability is essential. Its reinforced chassis, heavy-duty suspension and excellent ground clearance provide outstanding stability on uneven terrain, while the robust driveline ensures maximum traction under difficult working conditions. Ideal for: Mining Operations Quarry Projects Road Construction Earthmoving Infrastructure Development Aggregate Transport Sand & Gravel Transport Rock Transport Government Projects Municipal Works Proven Mercedes-Benz Power At the heart of the truck is the well-proven Mercedes-Benz OM460 12.8-litre inline six-cylinder EURO-3 diesel engine producing 394 HP and 1,900 Nm of torque. Combined with the Mercedes PowerShift 3 automatic transmission, this proven powertrain delivers smooth shifting, outstanding pulling power and dependable performance in demanding working environments. The EURO-3 engine is particularly appreciated throughout international export markets thanks to its reliability, straightforward maintenance and long service life. Built for Hot & Dusty Climates Many heavy-duty trucks perform well on the road. Few are specifically configured for extreme working environments. This Arocs dumper is equipped with a cooling package for very hot regions, a construction-site air filtration system, an additional cyclone dust filter and a raised air intake behind the cab. These features help protect the engine and maintain performance when operating in dusty mines, desert regions and remote construction sites. Genuine German MEILLER H436 Tipper The original MEILLER H436 rear tipper body is one of the most respected tipper systems in the industry. With a generous 20 m³ capacity, an 8 mm HARDOX 450 wear-resistant steel floor and a heavy-duty hydraulic tipping system, it has been developed for intensive daily operation and long service life. Whether...

Condition: used, mileage: 3,15,263 km, power: 355 kW (482.67 HP), first registration: 07/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 530 SC PXP H3296 DESERT YELLOW Psdpfx Apszahcljhjgr Headlight beam pattern for right-hand traffic Electrical connection for trailer, 24V/15-pole, cable: 15-pole + EBS OBD, Euro VI Stage E Auxiliary heater with waste heat recovery and timer Scale speedometer display in km/h Automatic transmission with manual override – full version Basic immobilizer Rear lights with incandescent bulbs Stabilink rear axle suspension Halogen headlights Emission class Euro 6 Traction control (ASR) Space Cab - cab Drive axle with disc brakes Parking brake actuator with test position Rear mudguards Splash guard Front underrun protection Convex main mirrors Pneumatic connection for trailer, swivel coupling Walkway with step, standard Exhaust pipe, horizontal, low Body connector on the cab front Cold foam mattress for lower bunk Walkway step, left Work lights, LED Standard transport, full version Automated transmission, TraXon, 12 gears Interior trim color: Dark Sand Standard mounting plate DAF Connect Co-driver seat: Basic Fuel tank, left Adaptive cruise control with FCW and AEBS-3 Front axle 1, 8,000 kg, load capacity index 156 Type approval for complete vehicles (WVTA) Rear axle 1, 13,000 kg, load capacity index 149 Standard maintenance interval Luxury loudspeaker system with 6 speakers Cab, interior trim Delta black Door panel: loosely woven fabric Soft-grip steering wheel, color black Electronic Stability Control (VSC) Driver's seat armrest Fog lights Lane change warning system Window lifters: electric Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connection Driver Performance Assistant Storage compartment for trailer connections H3296 Desert Yellow Central locking Sealing, lower part, cab structure and mud flaps on driver's side Antennas: DAB-ready radio, 2x mobile GNSS, extra: CB Sun visor, exterior, green, translucent Cab air-suspended Driven rear axle(s): 315/80 R22.5 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Reversing warning system 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 Aluminum fuel tank 430 l, height 620 mm ZF Intarder Aluminum wheels Alcoa Dura-Bright Auxiliary power supply: standard + 2x 40 A Digital tachograph, VDO 1C Vertical battery box, left, no spare wheel holder Auxiliary engine, rear, 13 h, continuous, pump drive Front axle(s): 385/65R22.5 Air intake, top, with cyclone filter Rear axle ratio 2.69 First transmission auxiliary drive NH/4c-R-32/25 Curtains with partition curtain Headlight design and bumper: cab color Cool box or refrigerator Dust protection shield Rear: 13.00 t, air suspension, SR1347 Speed limiter setting 90 km/h Automatic cab climate control ECO mode AdBlue® tank 75 l, left chassis side Wheelbase 3.60 m / rear overhang 0.75 m Truck phone Chassis preparation with hydraulic front axle from PXP Front: 8.00 t, parabolic, 187N ECAS remote control with extended functions Navigation preparation Driver's seat: Luxury Air Analog body signals and warnings Axle load monitoring Battery energy monitoring Aluminum air reservoir Protective net on lower bunk Lower bunk with 65-liter drawer PAUL PXP (GER) for CF or XF Loading camera FHS roof Wind deflectors side windows 2 rotating beacons on lamp bar from Truckline 24V socket on chassis (NATO socket) 2 work lights (9 LEDs) rear, on top of cab Bycool compressor stationary air conditioning, roof version Compact Lamp bar Truckline SC with 4x Lumina Chrome Celis Lifta

Condition: used, mileage: 1,62,192 km, power: 335 kW (455.47 HP), first registration: 02/2022, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,440 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, 2846 Actros Roll-off Body + PK 28002 Tec E Crane + Grapple Wheelbase: 4.80 m Suspension: Leaf-air suspension Palfinger Crane Type: 28.002 TEC E Operating hours: 2438 h 6x Hydraulic extension 2x Hydraulic outriggers 5+6 control + Remote control + Grapple Palfinger Roll-off Hook Year of manufacture: 2022 Special equipment: Axle load measuring device, front axle load 9.0 t, equipment package: Driving, right exterior mirror with maneuvering position, electric sun visor for windshield, sun visors for side windows, driver and passenger door, sun visor for driver's side window, equipment package: Media, equipment package: Visibility, Bi-Xenon headlights, LED taillights, headlight cleaning system, 220 Ah battery (AGM), standard and DuoMatic brake connections, interactive cockpit multimedia system, navigation system, remote query function Remote Online, additional compressed air tank, air horn, cab: with air suspension, suspension: front springs 9.0 t, 3 leaves, additional parking brake on front axle, fire extinguisher, vehicle without MirrorCam exterior mirror camera, 12-speed transmission - type: G 281-12, notebook holder, rear axle planetary gear 485, folding table in bulkhead, automatic climate control, comfort telephony (Bluetooth) with inductive charging cradle, additional fuel pre-filter, fuel tank: 390 L aluminum, left, cooler box / refrigerator, cooling capacity for hot climates, steering oil cooler, air intake behind cab, air filter: cyclone air filter, 2-cylinder air compressor, rear engine PTO, ISO pump, reinforced engine brake, reinforced engine mounting, reinforced engine compartment encapsulation, trailing axle 8 t steered, relief-valved, liftable, auxiliary drive MB 123-10c, programmable special module, PremiumComfort mattress lower, wheelbase variant 4900 mm, frame lowering with bellows residual pressure control, frame overhang 2550 mm, reversing warning sound and flashing warning light (external warning signal), switch for loading platform, disc brakes with partial protection, interface for fleet management system, fuse box, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat leather, seats in cab: armrests on both sides of passenger seat, seats in cab: driver seat with massage function, seats in cab: driver seat comfort suspended seat, external sun visor, stowage flap on the outside left, 12V / 15 A socket in the passenger footwell additionally, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, door extension for cab, additional thermal insulation, two-plate clutch, oil cooler transmission Additional equipment: Emission standard EURO 6, storage compartment above windshield with lid, axle configuration: 6x2, Actros 5, Actros cab L, heated approach / front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pin, exhaust tailpipe to the center of the vehicle, equipment package: Powertrain 2, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entry fixed, cab: interior package chrome, cab: tilting mechanism hydraulic, cab: L ClassicSpace, 2.30 m, tunnel 170 mm, cab variant: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab variant: L, stowage flap on the outside right, bumper corners a Pgodpezn Dbrofx Aphor

Condition: used, mileage: 1,62,192 km, power: 335 kW (455.47 HP), first registration: 02/2022, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,440 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, 2846 Actros Roll-off Truck + PK 28002 Tec E Crane Wheelbase: 4.80 m Suspension: Leaf-air Palfinger Crane Pjdpszn Dbxefx Aphjgr Type: 28.002 TEC E Operating hours: 2438 h 6x Hydraulic extension 2x Hydraulic outriggers 5+6 control + Remote control + Grab Palfinger Roll-off Hook Year of manufacture: 2022 Special equipment: Axle load measuring device, front axle load 9.0 t, equipment package: Driving, right exterior mirror with maneuvering position, electric sun protection roller for windshield, sun protection roller for side windows, driver and passenger door, sun protection roller for side window, driver's door, equipment package: Media, equipment package: Visibility, Bi-Xenon headlights, rear lights LED, headlight cleaning system, battery 220 Ah (AGM), brake connection standard and DuoMatic, cockpit multimedia interactive, navigation system, remote query function Remote Online, additional compressed air tank, air horn, cab: with air suspension, suspension: front springs 9.0 t, 3 leaves, additional parking brake on front axle, fire extinguisher, vehicle without exterior mirror camera MirrorCam, transmission 12-speed - Type: G 281-12, holder for notebook, rear axle bevel gear 485, folding table in the bulkhead, automatic climate control, comfort telephony (Bluetooth) with inductive charging cradle, additional fuel pre-filter, fuel tank: 390 L aluminum, left, cooler box / refrigerator, cooling capacity for hot climates, steering oil cooler, air intake behind the cab, air filter: cyclone air filter, air compressor 2-cylinder, rear engine PTO, ISO pump, reinforced engine brake, reinforced engine mount, reinforced engine compartment encapsulation, trailing axle 8 t steered, load-relieving, liftable, auxiliary drive MB 123-10c, parameterizable special module, PremiumComfort mattress lower, wheelbase variant 4900 mm, frame lowering with air spring residual pressure control, frame overhang 2550 mm, reversing warning acoustic and flashing light (warning signal outside), switch for loading platform, disc brakes with partial protection, interface fleet management system, circuit breaker, seat cover / upholstery: passenger seat velours, seat cover / upholstery: driver's seat leather, seats in the cab: armrests on both sides of the passenger seat, seats in the cab: driver's seat with massage function, seats in the cab: driver's seat comfort suspended seat, sun visor outside, storage compartment outside left, 12V / 15 A socket in the passenger footwell, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment right, door extension for cab, additional thermal insulation, twin-plate clutch, oil cooler transmission Additional equipment: Exhaust standard EURO 6, storage compartment above the windshield with lid, axle configuration: 6x2, Actros 5, Actros cab L, approach / front mirrors heated, trailer brake 2 - line, connections left, trailer socket 24V / 15-pole, exhaust pipe to the center of the vehicle, equipment package: Powertrain 2, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic switch-on for driving lights (light sensor), cab: cab entrance fixed, cab: interior package chrome, cab: tilting device hydraulic, cab: L ClassicSpace, 2.30 m, tunnel 170 mm, cab variant: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab variant: L, storage compartment outside right, b

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Pgsdpfx Apezunvaohor Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: new, FERVI Pressure Sandblaster with 2 Dust Collectors The FERVI 0605 pressure sandblaster with 2 dust collectors is equipped with a pressure tank for a greater abrasive effect, a double cyclone dust collector, a paper filter, a front opening, and a lighting fixture with 3 fluorescent lamps. Internal usable dimensions: 1180 x 850 x 890 h mm Maximum capacity: 150 kg Operating pressure: 6 ÷ 8 Bar Air consumption: 31 SCFM / 880 l/min Nozzle diameter: ø 6 - 7 mm Electric dust collector: 2 x 230 V 50 Hz 1.2 kW Pgodpji A Iuuofx Aphor Filtration capacity: 5 microns Equipped with lighting: Yes Overall dimensions: 1800 x 1515 x 2070 h mm Net weight: 245 kg Packaging dimensions: 1340 x 970 x 1090 h mm

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, underfeed firing system with a moving grate, output 550 kW, year of manufacture 2018, including feed screw with backfire protection, including infeed screw, including pneumatic cleaning, including flue gas recirculation, including multi-cyclone separator, including ash removal system, including control system for Schmid boilers, including electrostatic precipitator from Meisterfilter, including control system – electrostatic precipitator, including ash removal system for electrostatic precipitator, including flue gas fan. Dismantling must be carried out by the buyer. Not included: - Bunker discharge system Pgodpfxjvgcwmj Aphor - Chimney Information regarding the bunker discharge system: If you are interested in a moving floor or agitator discharge system, I can assist you.

Condition: new, Year of construction: 2025, power: 5 kW (6.80 HP), SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment. Pgjdpfx Apowc Rcnehjr The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve. The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package. This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling. The scope of delivery includes: SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar High-performance 1 1/4" water separator, permanently installed on the unit SAPI safety shut-off device Cyclone cleaner for abrasive preparation with lifting device Abrasive sieve (inserted sieve in the blast pot hopper) Filling hopper 500x500x380 mm 4-meter connecting hose from the filling hopper to the cyclone cleaner 3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container 10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. Psdpfx Apjwc Nrnohsgr To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, Basic TWO Blasting Container – A New Standard in Sandblasting Introducing the SAPI Basic TWO Blasting Container—a true milestone in the sandblasting industry, designed with dual-container space to maximize functionality and efficiency. With its spacious layout and innovative features, this advanced sandblasting solution is perfect for professionals who need more room for their work without compromising on quality and performance. The Ideal Solution for Maximum Efficiency For companies seeking a comprehensive, practical, and high-quality sandblasting solution, the SAPI Basic TWO Blasting Container is the perfect choice. With its exceptional features and thoughtful design, it raises productivity and quality to a new level in the sandblasting industry. More Than Just a Container – A Complete Professional Solution The SAPI Basic TWO Blasting Container offers the perfect balance of space, functionality, and cutting-edge technology. Thanks to its innovative design and premium features, it is not just a simple container—it’s a fully operational solution that takes sandblasting to the next level of efficiency, effectiveness, and safety. Whether for large-scale projects with demanding requirements or precise detail work, this system provides the space, tools, and technology needed to complete the job efficiently, safely, and professionally. Key Features ✔ Spacious Blasting Area & Technical Room – The dual-container design provides ample workspace for sandblasting while ensuring a separate technical room for optimized workflow and easy equipment access. ✔ Plug-and-Play Convenience – The SAPI Basic TWO Blasting Container is designed for ease of use, requiring minimal setup so you can start blasting immediately. ✔ Enhanced Air Quality – Equipped with the SAPI Air Filter, the container ensures a cleaner and healthier work environment by effectively controlling dust and airborne particles. ✔ Dual Cleaning Modes with 5kW Abrasive Vacuum Turbo Cleaner – Efficient handling of abrasive recovery and cleaning with two modes for maximum flexibility and control during operation. Pgodpfsupzt Uox Aphor ✔ Durable, Rubber-Coated Walls – The interior walls are lined with heavy-duty rubber, ensuring resistance to intensive sandblasting operations while extending the lifespan of the workspace. ✔ Bright & Well-Lit Work Areas – Three high-powered LED lights are strategically placed to provide optimal visibility, ensuring precision and safety during sandblasting. ✔ Robust Premium 200-Liter Sandblasting System with Cyclone Cleaning – The powerful 200-liter system enables efficient and continuous blasting, while the integrated cyclone cleaning system improves abrasive quality, reduces waste, and boosts productivity. Blasting Room Dimensions ✔ Depth: 4.40 m ✔ Total Width: 2.25 m ✔ Total Height: 2.65 m

Condition: used, functionality: fully functional, Original PROBAT 60 industrial roaster, manufactured in 1970, equipped with a wood-fired heating system. A robust, heavy-duty machine, renowned for its high durability and excellent roasting quality. Includes: - Cooler - Cyclone - Exhaust system The machine is currently disassembled and ready for transport. Pgsdszcl U Depfx Apher

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: F0i-F, total height: 3,120 mm, total width: 3,350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, product length (max.): 2,597 mm, number of axes: 3, This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information. Additional equipment • Spindle Cooler: Included • Preparation for 4th Axis: Pneumatic Clamping Line • Torque Monitoring: Tool Monitoring Systems Machine Benefits Technical Machine Benefits • Coolant pump medium pressure type 1: 19 bar, 1. 5 kw, 18 l/min • Cyclone filter: 25 um • Hinged belt conveyor: ejection left or right side • Oil separator: belt type Extra Information Podpfx Apjx D Sqtshegr Machine still under power Technical Specification Taper Size BT 40

Condition: used, Documentation Multievacuator Pgedpfxezg Nakj Apher Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Condition: like new (used), Year of construction: 2019, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 10804, overall weight: 3,800 kg, rotor diameter: 500 mm, number of blades: 5, total length: 2,100 mm, total height: 3,878 mm, total width: 2,283 mm, rotor width: 1,000 mm, power: 52.5 kW (71.38 HP), filling opening width: 1,200 mm, filling opening length: 1,200 mm, input voltage: 400 V, Includes 1 set of new knives, various screens, extraction fan, and cyclone filter. Pgsdpfxjyrc E Ej Apher

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Technological line of the Polish brand BRODPOL for sawing medium-sized logs with a length from 1,800 to 3,000 mm and a diameter from 120 to 480 mm Year of production: 2023 Technical condition: very good The line consists of the following machines and devices: 1. Log magazine/feed conveyor with inclined discharge, type PKS 2200/2912 Year of production: 2023 2. Driven prism-shaped accelerating table, length 5,000 mm, equipped with a pneumatic log discharge mechanism Year of production: 2023 3. Driven prism-shaped accelerating table, length 4,000 mm, equipped with a log turning mechanism Year of production: 2023 4. Chain-fed circular saw unit TT5/700/480 G Year of production: 2023 5. Receiving roller table with separating plates, “bag” type, length 7,000 mm Year of production: 2023 6. Centring table SC 8000, equipped with a mechanism for stopping one cant Year of production: 2023 7. Double-spindle multi-rip saw WP 220 Year of production: 2023 8. Central belt conveyor, length 38,000 mm, belt width 500 m Psdpoziqnusfx Aphegr Year of production: 2023 Additionally, the line includes a waste receiving system with an MDR metal detector and a MADREW RK 650x200 chipper from 2021, as well as a dust extraction installation with a JKF cyclone dedicated to this line. Assembly and start-up of the line are available for an additional fee

Year of construction: 2026, condition: new, CM 10. 750 KG / HOUR CAPACITY. CAPACITY IS GIVEN FOR 4 MM SIEVE. OUR LOCATION KONYA TURKEY BÜSAN SANAYİ. CRUSHER MOTOR: 37.5 KW. TOTAL WEIGHT 2.5 TONS. MAGNETIC DISCHARGE BELT, Pgodpfeu Dxngsx Aphor PLASTIC SPIRAL, DUST CYCLONE. COVERS APPROXIMATELY 20 M2 SPACE.

Condition: used, mileage: 6,90,000 km, power: 315 kW (428.28 HP), first registration: 09/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, * Mercedes Arocs 1843 SZM * First registration: 2016 * 690,000 km * Euro6 * 4 x 2 * Leaf spring - air suspension * Air conditioning * Navigation system * Automatic transmission * 3-stage engine brake * Tipping hydraulics * Aluminum rims * Wheelbase: 3.60 m * Unladen weight: 7,542 kg Pjdpfezi Ighox Aphogr ---- Special equipment: Audio-navigation system with Bluetooth connectivity, exterior mirror on the right with maneuvering position, battery 220 Ah, CB radio, compressed air tank made of aluminum, air horns (2) on the cab roof, hydraulic oil tank 200 L, aluminum, right side, interior filter for construction site vehicles, fuel tank: 290 L, aluminum, left side, light alloy rims 11.75x22.5 (ALCOA Dura-Flange polished, on the front axle), light alloy rims 9.00x22.5 (ALCOA Dura-Flange polished), air intake behind the cab, air filter: cyclone air filter, air compressor 2-cylinder, reinforced engine brake, reinforced engine compartment encapsulation, auxiliary drive MB 131-2c, configurable special module, frame lowering with airbag residual pressure control, reversing warning signal (acoustic, external), fuse box, seats in the cab: driver's seat, comfort suspension seat, sun visor, exterior, sun blind for side window, driver's door, voltage converter 24V / 12V 10 A, splash guard front, 12V socket in the co-driver's footwell, 24V / 25 A socket in the co-driver's footwell, underrun protection front, preparation / switch for lift axle on the semi-trailer / trailer, preparation for reversing camera, preparation for cooler box / refrigerator, additional thermal insulation, auxiliary heater (water). Additional equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, trailer socket 24V / 15-pin, work lights, Arocs, exhaust pipe to the center of the vehicle, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air unit medium, cab: width 2.30 m, cab: movable cab entry, cab: tilting mechanism hydraulic, cab: L ClassicSpace, cab floor with engine tunnel 170 mm, suspension: leaf spring / air suspension, suspension: front springs 7.5 t, 3 leaves, electric windows, windshield tinted, generator 100 A, transmission 12-speed - type: G 211-12, urea tank (AdBlue): 60 L, lifting roof manual (steel), rear axle bevel gear 440, information display 10.4 cm, interior filter: pollen filter, body / structure: semi-trailer tractor, body variant: standard, comfort bunk lower, mudguards 3-piece, steering power pump unregulated, air intake from the front, air dryer heated, engine 10.7 L - 315 kW R6 diesel (OM 470), wheelbase 3600 mm, ramp mirrors, waste heat recovery, disc brakes with partial protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: co-driver functional seat, stabilizer front axle, socket in the cab 24V, tachograph / EU control device, preparation for toll collection, front axle straight, permissible total weight 18.00 t

Condition: used, Year of construction: 2001, Wood chip heating system Binder RRK 640 - 850, output 850kW, year of manufacture 2001, underfeed combustion system, including feeding auger with backfire protection, including fuel transport auger, including cyclone separator for fly ash, including return line booster (boiler pump and mixing valve), including control system, system fully functional, dismantling must be carried out by the buyer, system is located on the ground floor, can be rolled out as a single unit, forklift available. Pedpfx Apovgcqyehjgr