Used Schauenburg Cyclone for sale (236)

Condition: good (used), Year of construction: 2018, Voltage in Volt: 400 Frequency in Hz: 50 IP protection class: 55 Protection class: I Power consumption in kilowatts: 4 Air volume without hose in m³/h - l/min: 489 - 8150 Lajdpfx Asr E Uwuspdeg Maximum negative pressure in kPa-mbar: 30 - 300 Noise level in dB(A): 72 Tank volume in liters: 100 Main filter type: Polyester Star Filter Main filter area in cm²: 19500 HEPA H14 in cm²: - Inlet in mm: 70 Dimensions L x W x H in mm: 1130x600x1530 Weight in kg: 139 Optional Longopac system: - 5-pole three-phase plug: Included Plug with phase inverter: Included Filter shaker (manual): Included Accessory container: Included Removable container: Included Chassis with brakes: Included Motor protection switch: Included Pressure gauge: Included Three-phase side channel blower: Included Hose and cable holder: Included Cyclone plate: Included Vacuum relief valve: Included

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, total width: 4,325 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool weight: 30,000 g, product length (max.): 8,150 mm, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. • Max. workpiece diameter: 1450 mm • Max. workpiece weight: 2000 kg • Travel (X/Y/Z): 1400 x 1050 x 1200 mm • Pallet size: 800 x 800 mm Lajdpfezar Aiex Apdeg • Spindle motor power: 22/35 kW • Max. torque: 1732 N·m • B-axis: indexable by degree • Max. tool diameter: 130/320 mm • Max. tool length: 630 mm Additional equipment • Belt-type oil skimmer • Triple light tower • Pallet centering device • Shower coolant • Through-spindle coolant 70 bar, 7.5 kW, with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Dimensions Machine Depth 8150 mm Technical Specification Taper Size BT 50

Condition: used, Industrial Rotary Valve, Rotary Airlock Feeder, Used machine Manufacturer: Unknown / Industrial execution Type: 8-pocket rotary airlock Lsdpfezwfbxex Apdeag Condition: Used, robust industrial execution Overall dimensions: 1000 x 630 x 770 mm Technical and operating parameters: Inlet size: 510 x 510 mm Outlet size: 510 x 510 mm Number of pockets/cells: 8 pcs Pocket/cell dimension: 490 x 200 x 200 mm Pocket/cell capacity: 9.8 liters Design / Operation: Heavy-duty rotary airlock feeder unit equipped with a large chain drive sprocket. Designed for controlled feeding and pressure sealing of bulk materials. Suitable Application Areas: Dust collection and filtration: Installation below cyclones, dust collectors, and bag filters for continuous dust discharge while maintaining system air seal. Bulk material handling: Uniform feeding of powders, granules, wood chips, pellets, sawdust, or feed materials from silos and hoppers. Agricultural and chemical industry: Metered discharging of dry granular and powdered raw materials into processing or packaging lines.

Condition: good (used), 1-shaft granulator shredder - brand LANCELIN L600 - 22 kw - shredding chamber 650 x 700 - throughput up to 1 ton/hour - 5 mobile knives/2 fixed blades mounted in bevels (scissor effect) - solid rotor - 12mm grid (other diameters possible) - 1 set of knives in reserve - loading possibility - delivered with its belt or/and vacuum cleaner and outlet cyclone and a deferrer (permanent magnet) . very reliable, very solid, no brittleness, ... Ledpevitnuefx Apdoag very versatile and powerful, can shred cables for copper, purges, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, etc. possibility of pre-shredding to 50mm with a pre-shredder or rotary shredder. Also for sale. price for lot .

Condition: good (used), input voltage: 400 V, type of input current: three-phase, MRPX514 complete with control cxabinette, motor, cyclone, tools for bowl and vibration damping feet Lasdpfsucq Srsx Apdjg

Condition: ready for operation (used), * Brand: MS Lodpfx Apsy R Tlhodsag * Type: dewatering unit * Dim. dewatering screen: 1800 x 700 mm _ 1 deck. * Driving: 2 pieces vibration motors of each 1,6 kW * Incl.: cyclone, collection tank and pump.

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan Laedpfx Ajy R S E Hspdeg Quantity: 1 piece available -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers Laodev Rpx Sjpfx Apdeg The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: new, Year of construction: 2024, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT440120 Main motor power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1200 mm Rotor diameter: 400 mm Number of knives: 70 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the type of waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, receiving conveyor with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines Laedpfx Ajq Sp Hdspdsg

Condition: new, Year of construction: 2025, functionality: fully functional, Cabinet Sandblasting Machine CORMAK 1200L is a premium industrial-grade surface treatment device designed for high-efficiency abrasive blasting operations. Its double-sided construction with two independent working stations allows two operators to work simultaneously, significantly increasing productivity and reducing downtime. The cabinet is designed for intensive use in workshops, regeneration facilities, shipyards, automotive, aerospace, and heavy industries. Main advantages of the machine Large 1200-liter working chamber – enables sandblasting of large metal components and structural elements. Double-sided operation – two pairs of gloves, two blasting guns, two control systems, and two cyclone extraction units allow two operators to work at the same time. Lajdpfx Apov Aad Aodsg Dust-free operation thanks to efficient extraction systems and sealed perimeter gaskets. Durable steel construction – designed for demanding industrial environments. Compatibility with various abrasives: corundum, glass beads, electrocorundum, crushed shells, and technical sand. 15 replaceable protective visor films – ensure long-lasting visibility during operation. Intuitive operation – foot pedals, ergonomically positioned connections, and pressure control systems. Construction and technology The CORMAK 1200L model is manufactured from high-quality steel and protected against corrosion. Two working stations located on opposite sides of the cabinet allow simultaneous blasting from both sides of the workpiece. Each station is equipped with an independent blasting gun, pressure regulator, foot pedal control, and cyclone dust extraction system. This solution ensures high productivity while maintaining safety standards and operator comfort. The spacious interior and wide access openings allow easy handling of large components. Precision and work efficiency The operating pressure range of 4–8 bar allows adjustment of blasting parameters according to the type of material and abrasive used. The dual nozzle system and independent workstations guarantee high productivity without compromising precision. Closed-loop operation combined with an efficient dust extraction system provides the operator with excellent visibility and a clean working environment. Applications The CORMAK 1200L cabinet sandblasting machine is a versatile industrial solution suitable for many applications, including: Sandblasting of wheels, frames, suspension components, and body parts. Metal blasting in manufacturing and repair facilities. Surface preparation before powder coating, galvanizing, or welding. Cleaning, smoothing, and restoration of industrial, wooden, and plastic components. Professional abrasive blasting applications requiring fast, precise, and clean surface treatment. Standard equipment 8 ceramic blasting nozzles 15 replaceable protective visor films 2 industrial blasting guns 2 pairs of protective gloves integrated into the cabinet 2 cyclone dust extraction systems 2 pressure regulators 2 foot control systems Technical specifications – CORMAK 1200L cabinet sandblasting machine Parameter Specification Internal cabinet dimensions 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x 1880 mm Operating pressure 4–8 bar Capacity 1200 L Abrasive materials Corundum, glass abrasive, sand Weight 196 kg Note: The machine is supplied in a self-assembly version.

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Ljdszg Nakopfx Apdoag Plan to provide a rotary valve. Available at extra cost.

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels Ljdjyrxwwopfx Apdsag --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: W20-0648-01, functionality: fully functional, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dustmaster 1200 The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding , cutting / routing, ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Lsdpfxovccc Ie Apdjag Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan, which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy-duty polyester needle felt (PNF) with Teflon coating, envelope-type filter design ƒ High efficiency, M class. Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Disposable bags can be used to line the container For the Romanian companies, there is the possibility of financing leasing in instalments with a minimum of 40-50% down payment. Price 4.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: Laodoum Uflspfx Apdsg - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: used, mileage: 94,112 km, power: 375 kW (509.86 HP), first registration: 07/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,400 mm, loading space height: 800 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Special equipment: Dautel steel 3-way tipper type DK3 * Foldable underrun protection * Trailer hydraulics * Automatic air conditioning Ledpfxsv A A E Nj Apdsag * Auxiliary heating * Cool box * Navigation system * Reinforced clutch (two-disk clutch) * Tires Continental M+S 385/65R22.5 * Front axle 9/9 mm * Tires rear axle 315/80R22.5 * Rear axle 1 11/11 and 11/11 mm * Rear axle 2 11/11 and 11/11 mm * CB radio * Storage above windscreen with cover, * Storage net on rear wall, * Front axle 8.0 t, * Trailer brake 2-line, * Audio system: Digital radio DAB / DAB+, * Step with handrail on roof, * Battery 220 Ah (AGM), * Air horn, * Electric. Pre-installation in the driver's cab 24V / 100 A, * Driver's cab: steel suspension, comfort, * Suspension: rear springs 2x13.0 t, * Suspension: front springs 8.0 t, 3 leaves, * Remote online remote query function, * Speed limiter system, * 12-speed gearbox - type: G 330-12, * Power Shift gearshift * LED rear lights, * Rear axle crown gear 300, * Automatic climate control, cool box / refrigerator, * Steering wheel with multifunction (leather), * Air intake behind the driver's cab, * Air filter: cyclone air filter, * Mercedes star, illuminated, * Rear engine output, * ISO pump, * Reinforced engine brake, * Reinforced engine compartment encapsulation, * Navigation system, * Parametrizable special module, * Frame overhang 800 mm, * Smoker's package, * Rain sensor, * Acoustic reversing alarm (external warning signal), * Rear window, * Fleet management system interface, * Headlight protective grille, * Circuit breaker, * Seat cover/upholstery: Passenger seat velour, * Seat cover/upholstery: Driver's seat fabric Dinamica, * Armrests on both sides of passenger seat, * Driver's seat air-conditioned suspension seat, * Driver's seat backrest foldable, * Sun visor outside, * Sun blind side window, driver's door, * Rear axle stabilizer, * Steel rims 11.75x22.5 (on front axle), * 12V/15 A socket in passenger footwell, * Additional 24V socket in passenger footwell, * Work light on top of rear wall, * Straight front axle, * Increased ground clearance, * Additional thermal insulation, * Additional heating (water), * Two-disk clutch Other equipment: * EURO 6 emissions standard, * ABS can be switched off, * Axle configuration: 6x4, * Heated approach/front mirror, * Trailer socket 24V / 15-pin, * Arocs 5 series, * Exhaust to the right, * Batteries arranged next to each other, * Multimedia cockpit, * Compressed air connection in the driver's cab, * Steel compressed air tank, * Compressed air unit with condensate monitoring, * Automatic switch-on for driving lights (light sensor), * Driver's cab: movable driver's cab entrance, * Driver's cab: hydraulic tilting device, * Driver's cab: M ClassicSpace, 2.30 m, tunnel 170 mm, * Suspension: leaf / leaf, * Electric windows, * Tinted windscreen, * (AdBlue): 60 ltr., * Manual lifting roof (steel), * Body/structure: Chassis for tipper, * Comfort locking system, * Fuel tank: 290 ltr. steel, left, * Power steering pump unregulated, * Steering oil cooling, * Air compressor 2-cyl., * Air dryer heated, * Engine 12.8 ltr. - 375 kW R6 diesel (OM 471), engine variant OM 471, * Auxiliary drive MB 131-2c, * Type of use: local transport, * Wheelbase variant 3600 mm, * Ramp mirror, * Residual heat utilization, * Disc brakes with full protection, * Disc brakes front and rear axle, * Protective plate under front bumper, * Side marker lights LED flashing, * Seats in the driver's cab: passenger function seat, * Stabilizer

Condition: used, mileage: 94,112 km, power: 375 kW (509.86 HP), first registration: 07/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,400 mm, loading space height: 800 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Special equipment: Dautel steel 3-way tipper type DK3 * Foldable underrun protection * Trailer hydraulics * Automatic air conditioning * Auxiliary heating * Cool box * Navigation system * Reinforced clutch (two-disk clutch) * Tires Continental M+S 385/65R22.5 * Front axle 9/9 mm * Tires rear axle 315/80R22.5 * Rear axle 1 11/11 and 11/11 mm * Rear axle 2 11/11 and 11/11 mm * CB radio * Storage above windscreen with cover, * Storage net on rear wall, * Front axle 8.0 t, * Trailer brake 2-line, * Audio system: Digital radio DAB / DAB+, * Step with handrail on roof, Lodpov A A Haofx Apdsag * Battery 220 Ah (AGM), * Air horn, * Electric. Pre-installation in the driver's cab 24V / 100 A, * Driver's cab: steel suspension, comfort, * Suspension: rear springs 2x13.0 t, * Suspension: front springs 8.0 t, 3 leaves, * Remote online remote query function, * Speed limiter system, * 12-speed gearbox - type: G 330-12, * Power Shift gearshift * LED rear lights, * Rear axle crown gear 300, * Automatic climate control, cool box / refrigerator, * Steering wheel with multifunction (leather), * Air intake behind the driver's cab, * Air filter: cyclone air filter, * Mercedes star, illuminated, * Rear engine output, * ISO pump, * Reinforced engine brake, * Reinforced engine compartment encapsulation, * Navigation system, * Parametrizable special module, * Frame overhang 800 mm, * Smoker's package, * Rain sensor, * Acoustic reversing alarm (external warning signal), * Rear window, * Fleet management system interface, * Headlight protective grille, * Circuit breaker, * Seat cover/upholstery: Passenger seat velour, * Seat cover/upholstery: Driver's seat fabric Dinamica, * Armrests on both sides of passenger seat, * Driver's seat air-conditioned suspension seat, * Driver's seat backrest foldable, * Sun visor outside, * Sun blind side window, driver's door, * Rear axle stabilizer, * Steel rims 11.75x22.5 (on front axle), * 12V/15 A socket in passenger footwell, * Additional 24V socket in passenger footwell, * Work light on top of rear wall, * Straight front axle, * Increased ground clearance, * Additional thermal insulation, * Additional heating (water), * Two-disk clutch Other equipment: * EURO 6 emissions standard, * ABS can be switched off, * Axle configuration: 6x4, * Heated approach/front mirror, * Trailer socket 24V / 15-pin, * Arocs 5 series, * Exhaust to the right, * Batteries arranged next to each other, * Multimedia cockpit, * Compressed air connection in the driver's cab, * Steel compressed air tank, * Compressed air unit with condensate monitoring, * Automatic switch-on for driving lights (light sensor), * Driver's cab: movable driver's cab entrance, * Driver's cab: hydraulic tilting device, * Driver's cab: M ClassicSpace, 2.30 m, tunnel 170 mm, * Suspension: leaf / leaf, * Electric windows, * Tinted windscreen, * (AdBlue): 60 ltr., * Manual lifting roof (steel), * Body/structure: Chassis for tipper, * Comfort locking system, * Fuel tank: 290 ltr. steel, left, * Power steering pump unregulated, * Steering oil cooling, * Air compressor 2-cyl., * Air dryer heated, * Engine 12.8 ltr. - 375 kW R6 diesel (OM 471), engine variant OM 471, * Auxiliary drive MB 131-2c, * Type of use: local transport, * Wheelbase variant 3600 mm, * Ramp mirror, * Residual heat utilization, * Disc brakes with full protection, * Disc brakes front and rear axle, * Protective plate under front bumper, * Side marker lights LED flashing, * Seats in the driver's cab: passenger function seat, * Stabilizer

Condition: new, functionality: fully functional, Year of construction: 2026, KDP1000 Cabinet Sandblasting Machine The KDP1000 cabinet sandblasting machine is an advanced device designed for intensive operation in industrial environments such as the automotive industry, shipbuilding, aerospace, and professional service facilities. With an impressive 1000-liter tank capacity and an 850-liter working area, the machine allows processing of large components – from wheels and rims to housings and heavy structural elements. High-quality construction and reliable operation make the KDP1000 a professional metal sandblaster designed for the most demanding users. Main Advantages of the Machine Large 1000-liter working capacity – enables processing of large-size components. Dust-free operation thanks to sealed perimeter gaskets – protects the working environment and operator health. Closed-loop blasting system – reduces dust emissions in the workplace. Efficient DC15 cyclone dust extraction system included as standard – effectively removes abrasive particles. Compatibility with various abrasives – including corundum, glass beads, quartz sand, and emery. Easy abrasive replacement – thanks to the built-in drain located at the bottom of the tank. Complete equipment set – includes gloves, a manual blasting gun, fixed blasting gun, and blow-off gun. Construction and Technology The KDP1000 sandblasting cabinet has been designed for intensive industrial use. Its robust steel construction with powder coating ensures resistance to abrasion and environmental factors. The housing is easy to maintain, while the sealed working system minimizes dust and increases operating safety. The hose blasting system located at the bottom of the tank provides stable abrasive flow. The large working area and convenient access to the cabinet interior allow efficient handling of components and maximum utilization of the available workspace. Precision and Work Efficiency The operating pressure range of 4–8 BAR allows the blasting intensity to be adjusted according to the type and condition of the surface being treated. Thanks to the 230 V power supply and reliable pneumatic system, the KDP1000 cabinet sandblaster ensures highly repeatable surface treatment results. Built-in lighting and a wide viewing window provide full control over the cleaning process, even when working on hard-to-reach areas of components. Standard Equipment 2 integrated rubber protective gloves Manual sandblasting gun Fixed blasting gun installed inside the cabinet Blow-off gun 7 ceramic nozzles Lodpfx Ajx Dkx Nspdjag DC15 cyclone dust extraction system Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Specification Operating pressure 4–8 BAR Tank capacity 1000 L Compatible abrasives Corundum, glass abrasive, sand Working area capacity 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabinet dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm Note: The KDP1000 sandblasting machine is supplied as a self-assembly version.

Condition: new, fuel type: diesel, tire condition: 100 %, axle configuration: 8x4, fuel: diesel, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, additional headlights, airbag, blind spot assist, central locking, compressor, cooling unit, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, retarder, soot filter, spoiler, start-stop system, tachograph, tail-lift, tire pressure monitoring, traction control, New vehicle, unregistered, IMMEDIATE DELIVERY, equipped with 20 m³ CO.MEC rear tipper, short cab, 8x4 chassis Configuration details below: • Worksite vehicle • Universal tipping body preparation – Plug&Play gearbox PTO with HW connection • External sun visor • Flexible cab step • Two LED work lights on rear cab wall • Two emergency beacons • No front visibility mirror • DAF Corner View system • Bumper colour: Crystal White • Door panels in soft fabric • Driver seat: Luxury Air • Driver seat with armrest • Speed limiter set at 80 km/h • Antennas: radio, 2x mobile phone, GNSS. Extra: CB radio • Main battery disconnect switch on chassis • Front axle: 2 x 9.00 t, parabolic, 187N • First front axle, 9000 kg, pneumatic load index 160 • Second front axle: 187N • Front axles: 13R22.5 tyres • Rear drive axles: 13R22.5 tyres • Spare wheel: 13R22.5 • F1, 13R22.5 GO OMTS 156/150 K Steering CBA • R1, 13R22.5 GO ODHD 156/150 K Traction DBB • SP, 13R22.5 GO OMTS 156/150 K Steering CBA • MX-13 engine, 390 kW/530 hp • Eco Performance • Urge-to-move function • Off-road applications with Rock-free function • Axle ratio 3.76 • MX engine brake and integrated ZF retarder • Electro-pneumatic parking brake control • Wheelbase 5.05 m / rear overhang 1.50 m • Chassis rail 310/8.5 mm, full-length reinforcement • Fuel tank: 330 L, aluminium, LH side, height 620 mm • Rear work light pre-wiring • Rear LED lights • Cross member D200-Dc130-V75 • Wired bodybuilder signals and warnings • Plug & Play application connector • Prep for air controls for tipper body • Flexible application connector • First gearbox PTO NH/4c-R-27/30 • MTC max 80,000 kg related to towing bar/coupling • Raised cyclone air intake • Dust exclusion shield • Lifting jack - Rounded body in HARDOX 500 abrasion-resistant steel - Floor thickness: 7 mm, sides: 5 mm — 20m³ - Rear tailgate with hydraulic 'gullwing' and tipping opening - Rear tailgate opening via hydraulic catches - Rear chute for unloading into paver - CRAMARO electric tarpaulin kit with 500 mm bows, remote control - Underslung body vibrator with remote control - Half-moon folding flap on rear side - Retractable pneumatic underrun beam at the rear Laodpoyi A A Ssfx Apdjg Leasing and/or financing available at the best market rates. Option for official DAF maintenance contract and extended warranty. Private negotiation, wide availability of chassis units, 3-axle 6x2 and 4-axle 8x4, immediately available in various colours, setups, and engine types. Description may contain inaccuracies and is subject to verification on site. This sheet is not contractually binding. For more information, please call the numbers listed, also available via WhatsApp Direct. Mr. Paolo Antonio Gorgoni Photo report conducted at our premises—photos are real and show the current vehicle condition. Please note the system automatically inserts features and options, so discrepancies may be present. For maximum accuracy, always verify specifications directly with us.

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Ledezlh Dfspfx Apdsag Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pieces Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, power: 56 kW (76.14 HP), Country of origin: China - Japan Standards Displacement: 5,204cc Dimension: 3,170 x 1,450 x 2,450 Brakes: Service: Hydraulic , Parking: Hand gross weight: 7,240 Gearbox type: Power Shift Lights-Front Combination Lights & Rear Combination Lights Mirror-Rear View Mirror (Right & Left Sides) Toyota - Side shift fork hang on Yellow strobe light Front combination lights Tilt cylinder hole boots High load backrest (flat steel type) Orange Seat belt Back up buzzer Rear pillar assit grip Rear view mirror right & left sides Lajdey Tylajpfx Apdeg UNIT INDICATION mm/kg Long Forks - 1520mm Led rear working light (selective lightning condition) Rear combination lamp less System of active stability (SAS) Cyclone air cleaner (dual elements) Pre-cleaner Anti-restart ignition key switch Floor mat Cooling fan guard WIDE VISIBLE MAST (V) - 4500 MM OR WIDE VISIBLE MAST (FSV) - 3700 mm Operator Presence Sensing System (OPS) Neutral Safety Switch Rated Capacity: 5000 kg - 8FD50N) Load Centre: 600 mm Steering : Power Steering Free Lift : 830 (With Load Backrest) Mast Type: 3 Stage Full Free Lift Mast Mast Lowered Height: 2200mm Mast Extended Height: 5135 mm (With Load Backrest) Overhead Guard Height: 2200 mm Carriage Type: Side Shift Carriage Lever: 3 Lever Fork Length: 1520 mm Tyres: Solid = More information = Number of cylinders: 6 Fuel tank: 120 litres

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT440120 Lajdpfx Aoq Sp Haspdjg Main motor power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1200 mm Rotor diameter: 400 mm Number of knives: 70 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the type of waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, receiving conveyor with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, metal cab, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control system (ASR), constant throttle, auxiliary drive, raised exhaust, differential lock, fog lights, rotating beacon, leaf spring suspension, on-board computer left, trailer coupling air-light-hydraulic, aluminum tank, underbody protection, roof hatch, green environmental badge. Wheelbase: 3600 mm, Body: Meiller 3-way tipper body approx. 9m³, on-board computer 9t front axle, rear axle planetary gear 300, 13.4t, stabilizer on front axle, reinforced stabilizer on 2nd rear axle, drum brakes on front and rear axles, electronic braking system with ABS and ASR, ABS can be switched off, condensate monitoring for compressed air system, parking brake electronic, off-road driving program, Mercedes PowerShift 3, transmission oil cooler, ClassicSpace, comfort locking system, rain sensor, preparation for toll collection, construction site filter, cyclone pre-filter for coarse dust, waste heat recovery, hot water auxiliary heater, PSM 2nd generation, protective plate for tank, tank capacity: 290l, LED daytime running lights, high-performance engine brake, protective plate under bumper, seat belt monitoring, reversing warning, auxiliary drive MB 131-2c pump. Laodjzl Tg Ejpfx Apdog Spare wheel available at extra cost! Day registration June 25, 2025. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Blasting principle: Injector principle (suction blasting) Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Viewing window: Safety glass with replaceable protective film Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Compact design – ideal for workshops and laboratories Ledpfxjv Syvqe Apdeag Quiet operation thanks to sound insulation Easy to maintain and durable

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Lodpfx Ajvmxvfepdjag Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 10,000 kg, maximum load weight: 16,000 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, trailer coupling, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, raised exhaust, differential lock, fog lights, rotating beacon, leaf spring suspension, air/light/hydraulic trailer coupling, aluminum tank, underbody protection, swing flaps, sunroof, green environmental badge. Wheelbase: 3600 mm, 9-ton front axle, rear axle with planetary gear 300, 13.4 tons, stabilizer on front axle, reinforced stabilizer on 2nd rear axle, drum brakes on front and rear axles, electronic braking system with ABS and ASR, ABS can be deactivated, condensate monitoring for compressed air system, parking brake electronic, off-road driving program, Mercedes PowerShift 3, transmission oil cooler, ClassicSpace, comfort locking system, rain sensor, pre-wiring for toll collection, construction site filter, cyclone pre-filter for coarse dust, waste heat recovery, hot water auxiliary heater, PSM 2nd generation, protection plate for tank, tank capacity: 290 l, LED daytime running lights, high-performance engine brake, protection plate under bumper, seat belt monitoring, reversing warning, auxiliary drive MB 131-2c pump. Spare wheel available at an extra charge! Frame length approx. 5050 mm! Frame height approx. 1230 mm! Registered on June 25, 2025. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Ledpfx Aoyvr Nvspdsag