Used Schauenburg Cyclone for sale (248)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 12,600 kg, maximum load weight: 13,400 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, short cab, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, fog lights, leaf/air suspension, trailer coupling with air and light connections, aluminum tank, side aluminum underrun protection, hydraulic cross lock, roof hatch, green environmental badge. Wheelbase: 3,600 mm. Body: used 20t roll-off system Hyva T20-53-S for containers up to 6.2m, 9t front axle, Hydraulic Auxiliary Drive (HAD), rear axle with 233 ring gear & planetary gears, 13.4t, pipe burst protection for brake system, electronic braking system with ABS and ASR, switchable ABS, disc brakes with partial protection front and rear, electronic parking brake, condensate monitoring for air system, front axle stabilizer, massage function for driver’s seat, residual heat utilization, construction site filter, PSM 2nd generation, ClassicSpace, MirrorCam, central locking system, light and rain sensor, offroad driving program, Mercedes PowerShift 3, classic cockpit, pre-installed for toll collection, tank guard plate, daytime running lights, high-performance engine brake, cyclone pre-filter for coarse dust, gearbox oil cooling, ESP, lane keeping assist, attention assist, turn assist, Active Brake Assist 5, tire pressure monitoring, PTO MB 131-2c pump, engine PTO rear with 100mm flange 650NM. Iijdpfxjvi Rybs Acrjc New vehicle from stock with day registration on 23.06.2022! Installation of roll-off system for an additional €7,000! On request, also available with a new roll-off system for €12,000 surcharge! Delivery approx. 14 days after order! ACCESSORY INFORMATION WITHOUT GUARANTEE. Changes, prior sale, and errors excepted!

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 13,865 kg, maximum load weight: 12,135 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, company installation, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off, vertical exhaust, differential lock, fog lights, rotating beacon, leaf suspension, air-light-hydraulic trailer coupling, aluminum tank, underrun protection, swinging tailgates, roof hatch, green environmental badge Iedpfx Ajyvr Nvjcroic Wheelbase: 3600 mm Body: Meiller 3-way tipper body 9t front axle, rear axle crown wheel 300 planetary 13.4t, stabilizer on front axle, reinforced stabilizer on 2nd rear axle, drum brakes on front and rear axles, electronic braking system with ABS and ASR, ABS switchable, condensate monitoring for compressed air system, electronic parking brake, off-road driving program, Mercedes PowerShift 3, transmission oil cooling, ClassicSpace, comfort central locking system, rain sensor, pre-installation for toll collection, construction site filter, cyclone pre-filter for coarse dust, residual heat utilization, additional hot water heater, PSM 2nd generation, tank guard plate, tank capacity: 290l, LED daytime running lights, high performance engine brake, guard plate under bumper, seat belt monitoring, reverse warning system, 6mm thick tipping bed floor, Meiller 7-piston pump type 275, Mercedes 131-2c PTO pump. Spare wheel available at extra cost! Day registration: 25.06.2025 ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 9,595 kg, maximum load weight: 16,405 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Kz. Haus, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, fog lights, leaf air suspension, tow bar air + light, aluminum tank, side. Aluminum underbody protection, roof hatch, green environmental badge Wheelbase: 3600 mm 9t front axle, Hydraulic Auxiliary Drive (HAD), rear axle crown gear 233 planets 13.4t, pipe rupture protection for brake system, electronic braking system with ABS and ASR, ABS can be switched off, disc brakes with partial protection on front and rear axle, electronic parking brake, condensate monitoring for compressed air system, front axle stabilizer, massage function for driver's seat, residual heat utilization, construction site filter, PSM 2nd generation, ClassicSpace, MirrorCam, comfort locking system, light and rain sensor, off-road driving program, Mercedes PowerShift 3, Classic Cockpit, preparation for toll collection, protective plate for tank, daytime running lights, high-performance engine brake, cyclone pre-filter for coarse dust, transmission oil cooling, ESP, lane keeping assistant, attention assistant, turning assistant, Active Brake Assist 5, tire pressure monitoring, auxiliary drive MB 131-2c Pump, engine output rear b flange 100mm 650NM. Frame length approx. 5700mm! New vehicle from stock with daily registration on June 23rd, 2022! ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! Iijdpfx Aevi Rx Rocrec - .

Condition: new, power: 310 kW (421.48 HP), fuel type: diesel, empty load weight: 8,636 kg, maximum load weight: 17,364 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Metal housing, 1x comfort seat, 1x bunk, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), differential lock, fog lights, beacon, leaf/air suspension, trailer coupling (air + electrics), aluminum fuel tank, 2nd axle liftable, 2nd axle steering/forerunner, underrun protection, roof hatch, green environmental sticker. Iodpfx Acex Ury Sorjic Wheelbase: 3,150 mm. 8t front axle, 13t hypoid rear axle (crown gear 485), 7.5t steered/liftable/relievable leading axle, electronic braking system with ABS and ASR, disc brakes with partial protection on front and rear axles, electronic parking brake, additional parking brake on front axle, condensate monitoring for compressed air system, front axle stabilizer, aluminum front underrun guard, smoker package, seat belt monitoring, lower bunk, residual heat usage, auxiliary hot water heater, additional thermal insulation, PSM 2nd generation, hill-start assist, ClassicSpace, central locking system, light sensor, rain sensor, Mercedes PowerShift 3, PowerShift Advanced, driving program economy/power, navigation system, axle load monitoring, Multimedia Cockpit Interactive, Remote Online, Remote Connect, pre-installation for toll system, LED daytime running lights, High Performance Engine Brake, cyclone pre-filter for coarse dust, gearbox oil cooling, ESP, lane keeping assistant, attention assistant, traffic sign assist, Active Brake Assist 5, auxiliary drive MB 131-2c pump. Frame length approx. 5,400 mm! Frame height approx. 1,140 mm! New vehicle from stock with day registration on 16.12.2025! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors.

Condition: new, power: 310 kW (421.48 HP), fuel type: diesel, empty load weight: 12,500 kg, maximum load weight: 13,500 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel cab, 1x comfort seat, 1x bunk, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, rotating beacon, leaf-air suspension, trailer coupling (pneumatic and electrical), aluminum fuel tank, 2nd axle liftable, 2nd axle steered (leading/liftable), underride guard, roof hatch, green emission badge. Wheelbase: 3150 mm Body: Telescopic skip loader system Hyva NG2018TAXL 8 t Isdpfx Aex Urziecreic Front axle, rear axle with 485 hypoid crown wheel, 13 t rear axle, 7.5 t steered, liftable and load-relieved leading axle, electronic brake system with ABS and ASR, disc brakes with partial protection front and rear, electronic parking brake, additional parking brake on front axle, condensate monitoring for compressed air system, front axle stabilizer, aluminum front underrun protection, smoker package, seat belt monitoring, lower bunk, residual heat utilization, auxiliary hot water heater, additional thermal insulation, PSM 2nd generation, hill start assist, ClassicSpace, central locking system, light sensor, rain sensor, Mercedes PowerShift 3, PowerShift Advanced, driving program economy/power, navigation system, axle load measuring device, Multimedia Cockpit Interactive, Remote Online, Remote Connect, pre-installation for toll collection, LED daytime running lights, high performance engine brake, cyclonic pre-filter for coarse dust, transmission oil cooling, ESP, lane keep assist, attention assist, traffic sign recognition, Active Brake Assist 5, MB 131-2c PTO pump. Optional installation available for an additional €5,900 net! Optional delivery with a different skip loader system available for an extra charge! New vehicle from stock with day registration on 16.12.2025! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale, and errors!

Condition: used, maximum load weight: 24,830 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 01/2007, loading space volume: 51 m³, Equipment: ABS, approx. 51,000 liters Heitling silo trailer for animal feed / 7 chambers / forced steering / aluminum rims ----* Manufacturer: Heitling * First registered: 01/2007 * Total weight: 32,000 kg * Empty weight according to vehicle registration document: 7,170 kg * Payload: 24,830 kg * Volume: 51m³ in 7 chambers (6.3m³/6.3m³/8.6m³/5.8m³/(5.8m³/8.6m³/9.6m³) * Axles: 2 x SAF / 2nd axle forced steering * Tires: 425/65 R 22.5 aluminum rims * Suspension: air suspension with lifting and lowering * EBS * Pressure tank 2 bar * 7 chambers * 7 Sliding lid * 7 udders * 6 floor emptying flaps NW200 with external control on the right * Discharge line NW80 to the rear * Solimar loosening Iisdoq I H N Hepfx Acroc * Access with walkway at the rear left * Central lubrication * Control box at the rear * Hose box left and right * LED work lights * LED reversing lights * Rotating beacon at the rear * Tool box on the left * Cyclone * Full load supports * Single fender German vehicle!! German papers!!

Condition: used, mileage: 18,709 km, power: 330 kW (448.67 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: beige, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, navigation system, soot filter, As new / original mileage / ready for immediate use Iiodpfxsy Eakas Acroc Body: - Body type: Hooklift, - Model: Hyva 26-51-S, - Hydraulic locking - Mechanical underride guard - Oil connections at the rear - Mesh box Equipment: - Cab: M ClassicSpace, 2.30 m, 320 mm tunnel - Air conditioning - Driver’s seat: Comfort suspension seat - Raised engine tunnel storage - Tinted windscreen with sun band - Rear window - Cab: steel-sprung, comfort - 50mm trailer coupling with dual-line trailer brake - Front axle load: 8.0 t - Suspension: 8.0 t front springs, 3-leaf - Suspension: 2x10 t rear springs, heavy-duty - 12-speed gearbox – Type: G 330-12 - Rear axle, 300 mm crown wheel - Cabin filter for construction vehicles - Enhanced cooling for hot climates - Cyclone air filter - Rear engine PTO - 290-liter tank with protection plate - Twin-plate clutch - Manual steel sunroof Technology: - Navigation system - Multifunction steering wheel - Audio system: Digital radio DAB / DAB+ - Interactive multimedia cockpit - Rotating beacons - Pre-installation for 4 surround cameras (display on onboard monitor) - Rain sensor - Circuit breaker - Heated front/approach mirrors - Automatic headlight activation (light sensor) - Electric windows Safety/Environment: - Enhanced engine brake - Selectable all-wheel drive - Front axle differential lock - Emissions standard EURO 6 Other: - German first delivery - 1 previous owner - Wheelbase variant: 3900 mm - Axle configuration: 6x6 - Model: Arocs 5, A - Suspension: leaf / leaf - Engine: 12.8 liter – 330 kW inline 6-cylinder diesel (OM 471) - PTO MB 131-2c - Permissible gross weight: 26.00 t - COC paper available - Max. train weight: 66 t - As-new condition - NO LS control Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approx. 200 vehicles available across vans, commercial vehicles, and construction machinery. We offer ongoing attractive financing options at special low rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction machine is welcome. If a new technical inspection (TÜV) is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners for an additional charge. The information provided in adverts, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Listed features are to be checked separately if necessary. Subject to error and prior sale.

Condition: used, Year of construction: 1982, grinding diameter:250 mm grinding length:650 mm centre height:125 mm internal grinding spindle rev.-stepless:9500-50000 U/min workpiece speeds -stepless:50-10000 mm/min grinding head swivelling:90 Grad max. dia. of grinding wheel:400 mm spindle bore:30 mm grinding length - plunge feed:80 (100) mm max. grinding depth by internal grinding:ca. 170 mm max. bore diameter to be ground:90 mm feed speeds:240 mm/min max. workpiece weight:80 kg required cooling water:36 l/min centre distance:650 mm Ijdpfx Acocxxubjrsic distance of workpiece spindle-taper cone:960 mm drive capacity - spindle motor:6,25 kW connected load:ca. 10 kW total power requirement:8,5 kW weight of the machine ca.:3,4 t dimensions of the machine ca.:3,9 x 2,5 x 1,85 m with Studer control, electric/hydraulic drive, variable speed, tailstock with fine adjustment and hydraulic back feed, work piece headstock with increased precision, table air , hydraulic removable dressing device, radius-dressing device, Hydro-Cyclone filter, automatic grinding wheel-balancing device, automatic dressing cycle with speed compensation

Condition: used, AZO GmbH E360 A2 AL screening machine, centrifugal screen Equipped with a dosing gate and cyclone Material: Aluminium/Steel Optional: available with various spare parts Excluding electrical control 2 units in stock See our other listings Ijdpfx Aszc N A Eecreic VMA Wekerom

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ 1) Bale Shredder MHB: Special price starting from €22,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency converter (FU) – this regulates the speed of the shredding floor. The bales are placed on the shredding floor, and the feed of the shredder is activated. The tines of the shredder tear the straw from the bale and fling it into the hopper. Ideally, the combination of bale shredder and straw shredder is recommended here. Technical data, bale shredder: Performance: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill, kW, number of straw mill). Without a straw mill, the bale shredder can even process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (l x w x h) Shredder motor: 5.5 kW, 380 volts Shredding floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (l x w x h) Weight: 400 kg 2) Straw Shredder MHZ 600 - 11/15 kW; immediately available Special price starting from €6,995 net Surcharge for the even larger straw shredder (18.5 kW) + €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380-volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm aperture With star-delta switch, overload protection, and 8 m power cable, ready for connection Discharge nozzle: 160 mm Discharge distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (l x w x h) Weight: approx. 240 kg --- Options available at an additional cost: Infeed auger + €970 net Cyclone (mounting on site by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial dust extraction system (demonstration model) + starting from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: starting from €1,620 net Special shredder extension, 3 m *other sizes will be calculated + €9,750 net Briquette press MPP 180 S; little used demonstration model 70 mm briquettes - up to a maximum of 100 kg/h Starting from €39,700 net * larger machines on request --- Description: The muetek bale shredder was developed for shredding round and rectangular bales of hay and straw. The shredder flanged onto the bale shredder shreds straw from all types of cereals, hay, corn, and miscanthus. The muetek machines in the MHZ/MHB series are characterized by their robust construction and solid design. muetek bale shredders in the MHB series are equipped with a chain conveyor, onto which the straw bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredding rotor; the feed speed is adjustable. The shredding rotor is equipped with several tines that tear open the straw bale. The straw separated from the bale is discharged. --- In principle, the machines work for dry raw materials: - Straw - Hay --- Iisdpeb Nulhofx Acroc Shredding hemp only works with a special shredder Surcharge approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the raw material: Moisture content maximum 12%

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net Iisdpfx Acoff Sbijroc *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Ijdpfxjd N Dn Do Acreic Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: ready for operation (used), Year of construction: 2007, total width: 1,800 mm, total height: 2,110 mm, overall weight: 1,500 kg, product length (max.): 1,710 mm, Deburring machine manufactured in 2007. This Fladder AUT-1000 VAC features a voltage of 3 x 400V and operates at a frequency of 50 Hz with a current of 50 A. If you are looking to get high-quality deburring capabilities, consider the Fladder AUT-1000 VAC machine we have for sale. Contact us for further details. • Voltage: 3 x 400V • Frequency: 50 Hz • Current: 50 A • Working height: 850 mm • Vacuum table width: 1000 mm • Max. workpiece height: 100 mm • Max. workpiece width: 1000 mm • Feed speed: 0.3 – 4 m/min • Standard feed speed: 0.3 – 3.6 m/min • Extraction capacity: 2500 m³/h • Extraction connection: 1x Ø200 mm • Number of spindles: 6 • Spindle length: 350 mm • Number of abrasive flaps: 168 • Main motor power: 7.5 kW • Rotation motor power: 0.37 kW • Oscillation motor power: 0.55 kW • Feed motor power: 1.5 kW • Vacuum turbine motor power: 7.5 kW • Fuse max.: 63 A • Fuse min.: 50 A • Air pressure: 1/4", 6 atm • Through-feed deburring machine for flat sheet metal parts • Deburring of edges and cut-outs • External vacuum turbine included • Special paint: RAL 7035 • Frequency converter: VLT 2807 for external infeed conveyor • External conveyor max. power: 0.75 kW • Motor-driven conveyor included • Conveyor dimensions: L = 1000 mm, W = 1010 mm • Roller conveyor at workpiece outlet • Roller conveyor dimensions: L = 1500 mm, W = 1000 mm Iijdpoy Tmbhsfx Acrec • 6 abrasive cylinders • Abrasive cylinder length: 350 mm • The extraction cyclone is present, but it is rusted. It was still used like that

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 4,000 kg, lifting height: 4,500 mm, free lift: 110 mm, fuel type: diesel, mast type: duplex, construction height: 2,990 mm, empty load weight: 6,220 kg, drive type: Diesel, construction width: 1,350 mm, Diesel forklift Load center: 500 mm Mast type: Duplex Technical condition: New Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% 3rd valve, 4th valve, rear work light, front work light, roof cover, soot filter, CE certificate Image may be for illustrative purposes only Forks: 1200 mm Height of overhead guard (raised): 2,285 mm Hydrodynamic transmission SAS Toyota ORS seat, artificial leather incl. orange seat belt & seat belt monitoring Mini-lever controls LED combination front light Blue rear warning light LED reversing light with switch (3 levels: On, Off, and Reverse) Fan guard Horizontally and vertically adjustable armrest Operator’s manual Iodjvim A Sopfx Acreic Fork carriage: 1,170 mm Adjustable steering column Fully hydraulic power steering Cyclone air filter with intake in overhead guard frame Multifunctional display II incl. self-diagnosis system

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Iedpfx Acsixt H Nereic Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Crushing/chipping machine Vecoplan VHZ 1300, hammer mill CPM, fan and cyclone filter JFK. Machine in good condition, only operated for approximately 500 hours. The line is complete with all conveyors. Iiedpfx Aeympx Uscrec

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 250 mm, rotor width: 450 mm, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start-up and end-piece sections In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with full sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, or 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside of the machine to reduce downtime during maintenance. The strongly tangential, curved rear wall of the cutting chamber combined with the aggressive, open rotor design guarantees reliable material intake and minimizes the risk of blockages. The compact granulators are designed for use in blow molding operations. They are suitable for recycling large-volume parts such as bottles, canisters, and crates. Thanks to the low feed height, the machines can easily be fed by hand or via a small conveyor belt. Low noise emissions and minimal footprint make this granulator the perfect solution for inline size reduction. 98T8Mrx Optional rear wall with elevated stator knife M version: The feed method featuring an elevated stator knife is more suitable for thicker-walled and more compact parts, such as injection-molded components, profiles, and sheets. The cutting geometry and reduced rotor aggressiveness deliver high-quality regrind, regardless of the material type or form, such as injection-molded parts, profiles, or plates. Control system and switch cabinet: The integrated control system and operator console not only comply with all current safety regulations, but can also be customized to address specific requirements. In addition, peripheral devices such as infeed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can start or stop the system automatically based on the operating status of upstream machinery. Standard configuration with blower, power consumption 0.37 kW, and 400-type cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Isdpfxjt Aagaj Acroic Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Approx. weight (kg): 700 Feed opening (mm): 380 x 450 Feed opening option, M Version (mm): 295 x 450

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Iijdpfxezaqlij Acroc Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) Ijdpfsyrr Rqox Acroic - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, year of last overhaul: 2024, complete briquetting line (RUF press already sold), price: x 1000 eur: dryer 35 crusher / knife mill - 7 wood waste boiler 5 feeder auger 6m 6 m 3,8 belt conveyor 2 pcs 2 Stk. 2,7 sorter with hopper 4,5 screw conveyor 6 pcs 6 Stk. 6,4 exhaust fan with cyclone 1 hopper with drive 2pcs 2 Stk. 6 wrapping machine 3,5 wet sawdust tank 1 fuel tank 1 Iisdpjxu Ryuofx Acrjc

Condition: ready for operation (used), Year of construction: 1999, operating hours: 123 h, power: 550 kW (747.79 HP), nominal heat output: 550 kW (747.79 HP), Manufacturer: MAWERA Type: WR550 Year of construction: 1999 Rated thermal output: 550 kW Fuel: Wood chips, sawdust, residual wood, bark, biomass Combustion system: Traveling grate furnace / moving grate Condition: used, functional Description: The MAWERA WR550 is a fully automatic biomass heating system for continuous industrial operation. The system was specifically designed for the economical combustion of wood chips and wood-based fuels with varying moisture content. The robust traveling grate system ensures even fuel feed and stable, efficient combustion. Thanks to its solid steel construction and industrial design, the system is particularly suitable for sawmills, wood processing companies, district heating plants, and industrial heating systems. Technical equipment: • Fully automatic fuel feed • Moving traveling grate for different fuel qualities • Automatic ash removal • Hydraulic or mechanical grate drive • Fire-resistant lining of the combustion chamber • Control via control cabinet Application areas: • Sawmills • Wood industry • Agricultural operations • Commercial and industrial halls • District heating • Drying plants Accessories: • Discharge systems, hydraulic, with push rods SST! Complete system Iiodpfey U Ru Uox Acrec • Cyclone separator • Conveyor screws • Hydraulic unit • Flue gas fan Inspection possible by appointment while still in operation. Subject to technical changes and prior sale.

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Quantity: 1 piece available -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg Isdpfxjy R S E Hj Acroic

Condition: ready for operation (used), Year of construction: 1999, operating hours: 1,24,009 h, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz Isdpfx Asy R Uvuscrjic • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Iedpov Rpx Sefx Acroic Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Iiodpfsflq Spjx Acroc Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.