Used Schichtenfilter Schenk Niro 600X600 for sale (150)

Condition: new, sheet width 2035 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam Gkodpfjxaaahsx Ap Dsc is hidden in the side stand - Segmented upper cheek

Condition: new, sheet width 2540 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm Gsdpfxsxaaz Se Ap Dokc total power requirement 5,5 kW weight of the machine ca. 6275 kg dimensions of the machine ca. 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system Control system expansion optional Gkjdpfx Aed Spf Rjp Dsc External dimensions: Overall height 8,700 mm Overall width 3,500 mm Overall depth 1,580 mm 51 carriers, each with a payload of 350 kg in the clear internal dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Deposit table at 990 mm above floor level, with NiRo work surface, 315 mm deep Color: gray Motor power, drive: 1 x 3.8 kW / 400 Volt Subject to errors and technical changes Surfaces cleaned, signs of use and minor deformations possible Delivery & installation currently mainly in Germany, Austria, and other neighboring countries.

Condition: good (used), Technical data for the shelf panel: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x shelf panel, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 590 mm Overall height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight per piece: approx. 6.90 kg Note: Water-permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows for good air circulation, e.g. in deep-freeze warehouses. Light-permeable – ensures a bright working environment in the warehouse. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Gsdoyzpiqepfx Ap Dokc This item is offered for collection only. Any transportation or dispatch beyond collection is subject to additional costs, which can be requested from us separately depending on the delivery location and scope.

Condition: new, 6 St. 100 kg range L-W-H 705 x 736 x 1019 mm weight 126 kg Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% Gkedpow U U Rfjfx Ap Dsc - Usable dimensions inside: 600x600 mm - lockable

Condition: good (used), Technical data for the shelf panel: Racking system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x shelf panel, used Material color: Sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight per piece: approx. 8.12 kg Max. load per shelf panel: 75 kg, with evenly distributed load. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Gksdpfx Apeyzmn Ds Dsc General information about the item: This item is offered for collection only. Any additional transport or shipping of this item entails extra costs, which can be requested from us separately, depending on delivery location or scope.

Condition: like new (used), Year of construction: 2013, type of input current: three-phase, Brand: POLYPACK POLY JUNIOR 2080TL shrink wrap tunnel year of production: 2013 Automatic shrink wrapping machine with motorized conveyor. product dimensions max: 800x600x600mm product dimensions mini: 200x50x50 mm Power supply on the right Output approx. 7-10 cycles / minute Working height: 850 mm Energy: 30 KW / 380 V three-phase / Compressed air 5-7 bar Product sensor cell Motorized upper and lower coil unwinder Schneider display Schneider PLC Film reel: - 35-90 microns - maximum diameter 400 mm - maximum width 600 mm Tunnel size Ho 1500 x W 800 x Ma 600 mm stainless film welding width: 800 mm Stainless steel structure Gkedpjhv Sldjfx Ap Djc machine length:

Condition: used, Surveillance camera, video surveillance -Line camera lens optical industry 3 550 450 -Come: from a warehouse liquidation -is sold unchecked with no guarantee -Dimensions box: 80/185/H120 mm -Weight: 1.2 kg Gkjdpfxeb N E Hds Ap Dsc

Condition: used, height 1600 mm width 600 mm depth 750 mm thread M 20 There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Gkodpfxoy Swh Ao Ap Dec If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires Godpfx Aov Sw E Aop Dokc * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! Gjdpfxjx I A Hpj Ap Dokc The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Condition: new, Year of construction: 2024, TP Turret Punch Presses With the Durma TP series of punch presses, you can achieve top quality with a precise and fast turret, improved hydraulics, and 3 automatic indexing stations. Featuring a movable table, partial unloading container, automatic clamps, CAD/CAM software, and a control unit, Durma turret punch presses are easy to operate. Automation systems that increase both work safety and productivity also enhance user safety while reducing downtime. Punching force: 30 tons Working area: 3,000+R x 1,500 mm X-axis travel: 3,000+R mm (adjustable) Y-axis travel: 1,500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min Combined X+Y speed: 92 m/min Max. stroke rate (in 1 mm increments, 1 mm sheet thickness): 1,100 strokes/min Max. stroke rate (in 25 mm increments, 1 mm sheet thickness): 325 strokes/min Max. marking speed: 1,200 strokes/min Main cylinder stroke: 40 mm Max. punching stroke: 25 mm Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (NiRo): 3 mm Max. cutting capacity with indexing station (steel): 3 mm Max. cutting capacity with indexing station (NiRo): 1.5 mm Tool changer (27 stations without tools and holders): 11 x A-station fixed: 0.8-12.7 mm 11 x B-station fixed: 12.8 - 31.7 mm 2 x C-station fixed: 31.8 - 50.8 mm 1 x D-station fixed: 50.9 - 88.9 mm 3 x D-station indexing: 50.9 - 88.9 mm Positioning accuracy: +/- 0.1 mm Repeatability: +/- 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. sheet weight: 200 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D-station): 88.9 mm Motor power: 7.5 kW Main dimensions: Height: 2,310 mm Gedpfx Ajg Admfsp Djkc Width without light curtains: 6,300 mm Width with light curtains: 8,300 mm Length without light curtains: 6,650 mm Length with light curtains: 7,650 mm Weight: 19,500 kg

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for Multi-Layer Thickness Measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, designed for precise, non-contact measurement of multi-layer materials such as plastic films, composites, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industries. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate layer thickness measurement Measuring method: A-Scan / optical interference analysis Channel: 1 (CH1) Fields of application: Inline measurement in production lines or for laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (see image) Sensor multi-Thick-MS1-CH1 Connection cable (Subject to changes and errors in technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone. Gkodpfx Aeziiw Usp Dsc

Condition: good (used), Heating/cooling plate Dimensions: 1,600 x 600 x 50 mm Channels: 6 Table/base unit: 1,600 x 600 x 820 mm Application: suitable for filling with hot or cold water. Gedpfjlnfhzex Ap Dokc

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: D32L/8407, Offer Number: D32L/8407 Machinetype: spring coiling machine Make: SCHENKER Type: 20RU Constr. year: 1998 Godpfowzkr Hex Ap Dskc wire diameter: 0,5- 2 mm Location: In our warehouse

Condition: used, For basquets Ø 500 mm. Power 10 Kw Gksdpfx Apowcf Nps Djc

Condition: new, Multifunction ( printer/scan/fax ) Konica Minolta 1600F New in box with toner . 47 units available now ! Gkodpfogakyfjx Ap Djc Monochrome laser , 16 PPM Color scanner 600x600 ppp As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Please do not hesitate to contact us for further information.

Condition: excellent (used), wire diameter - max. 2 mm Gsdpfxeyrhmnj Ap Dskc

Condition: excellent (used), Description to follow! Godoyrhmujpfx Ap Dekc

Condition: excellent (used), Description to follow! Gkodpfoyrhmzsx Ap Djc

Year of construction: 1985, condition: ready for operation (used), Compression spring making machine. Most of the Schenker range of machines, as well as some Bamatec equipment is available with us. Gkjdpfx Apsf I Uums Doc

Condition: used, Year of construction: 2000, Year of manufacture: Nov 2000 NOG OEDE AANHANGWAGEN BANDEN 9 R 22.5 Godpfoxwc Snsx Ap Dokc

Condition: used, Year of construction: 2000, Year of manufacture: Nov 2000 Serial number: 9 R 22.5 Gkedpfx Apsxwkwfe Dsc USED TRAILER TIRES ON 8 HOLES RIM.

Condition: good (used), Computer cabinet, server cabinet, control cabinet, network server cabinet, computer enclosure -Manufacturer: apra net Gedpfx Aob Riacsp Dskc -double opening -Dimensions: 600/600/H600 mm -Weight: 54 kg

Condition: good (used), Included in the scope of delivery: 1x bracket for push-through lock, used Material color: Sendzimir galvanized Manufacturer: SLP Gedpfxeipuggo Ap Djkc Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/piece: 0.930 kg