Angular Clamping Device

1600X600x750

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes Itedpoxv Av Rjfx Adlsl X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: excellent (used), Year of construction: 2017, operating hours: 19,907 h, functionality: fully functional, machine/vehicle number: 25221, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC640, table load: 1,400 kg, rotary table diameter: 800 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 4,408 h, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 42, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2017, Heidenhain TNC640 - Machine run time: 19,907 hours, Spindle run time: 4,408 hours - HSK-A 63, 18,000 min-1 - SRT800 torque drive in the C-axis - Tandem drive in the A-axis - 42 tool positions - Internal cooling system (IKZ) 80 bar, Varioventil adjustable from 0-80 bar - Compressed air at spindle center - External blow-off system - Air curtain for scale protection - Chip flushing gun - Automatic cabin roof - Electronic handwheel - Heidenhain measuring probe - Signal light - BLUM tool breakage/measurement system - Dynamic Efficiency Itedpfxez A Tzhs Adlsl - Dynamic Precision - Hermle WDS - Kinematic-Opt - Adjustable control panel - HIMS - Event messenger In very good condition - low spindle hours. The machine has previously been connected to a central coolant system. The machine will be delivered with a new tank and band filter, as well as a pump that supplies the IKZ and external cooling system (AKZ) pump. Functionally very similar to the standard Hermle configuration. We guarantee flawless operation and will gladly commission the machine at your location.

Condition: used, Year of construction: 2014, x-axis 1.200 mm Itodpjzbc Hhofx Adlol y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, Fanuc Oi-TD control 3-jaw chuck diameter 250mm 12-fold revolver tail stock chip conveyor The machine has only 4051 switch-on hours Technische Daten: / technical details Schwingdurchmesser / rotary diameter 650 mm Drehdurchmesser / turning diameter 400 mm Drehlänge / turning length 650 mm X-Weg / X-travel 230 mm Z-Weg / Z-travel 650 mm max. Drehzahl / max. spindle speed 4500 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kW Gewicht ca. / weight ca. 5400 kg Iodpfevi Haqjx Adletl Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Iedpeuz If Nsfx Adletl Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Used, untested robot. No technical documentation available. Not tested. Itedpfogu U Itjx Adlel

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Isdpfxjzg N Dij Adljtl Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, - FANUC i Series TD - Max. turning diameter: 420 mm - Max. swing dia over bed 670–850 mm - Max. turning length 3190 mm - Spindle speed: 2800 RPM - Spindle motor power: 22–25 kW - Spindle bore / Chuck size: 102–132 mm / 12 inches - X-axis travel: 293 mm - Y-axis travel: ±65 mm - Z axis travel: 3190 mm - Live tool speed: 5000 rpm - Number of tool stations on the turret: 12 - Machine weight: approx. 13000 kg Accessories, features - Coolant unit - Chip conveyor - Tailstock - Hydraulic steady rest - C axis Itedpfx Aezw N H Ejdlsl - Y axis - Live tool turret - Towel lamp - Transformer - Integrated hydraulics - 3 jaws hydraulic chuck - Tool eye (tool presetter) - Tool holders (live holders too) - Documentation The machine was owned by a sheet metal production company and the machine was barelly used. Very good condition. Under power in our showroom.

Condition: used, Year of construction: 1998, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg with Turbo Separator, loading unit, latest-generation balancing and dressing unit and various accessories * Isdpszgw I Nsfx Adlotl

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 Isdpfx Ajzdf Hvedljtl With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit