Used Schultz Solenoid for sale (362)

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: EB5 DW -Price: per piece -Quantity: 1 available Lrsdpob A Nrhofx Aqvel -Weight: 3.6 kg

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM Lrjdpfx Aqsh U Rzgovol WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, screw diameter: 45 mm, controller manufacturer: ENGEL, controller model: CC300 microcomputer, This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Additional equipment Lrjdex Nr Tnopfx Aqvsl • Tool heating: 32 control circuits, max. heating output 60 kW • Vacuum compressed air circuits: With Venturi nozzle and pressure switch • Solenoid air valves: 2/2-way, R1/2 inch • Autoprotect injection monitoring: Self-learning system for mold protection • Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% Machine Benefits Qualitative Machine Benefits • High precision and sensitive mold protection • Advanced control system with a 21. 5" full hd touch screen and user authorization system Technical Machine Benefits • Platen stroke: 1800 mm • Max. Platen distance: 2650 mm • Mold installation height: min. 850 mm, max. 1740 mm • High operational reliability with stable platen guidance and precise platen parallelism • Energy-efficient with reduced energy consumption and intelligent servo-hydraulics (engel ecodrive) • Multi-circuit hydraulics enabling parallel movements (ejector, core pull, nozzle) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2023, overall weight: 1,200 kg, total width: 2,500 mm, total height: 2,200 mm, product length (max.): 2,300 mm, number of axes: 6, This 6 axes MEI robot arm was manufactured in 2023. This system was manufactured for a project in the automotive industry. It features a total installed power of 26 kW and operates at a maximum peak air flow of 62.5 liters/min. The machine is equipped with a main control cabinet and various pneumatic components from SMC. If you are looking to get high-quality automation capabilities, consider the MEI robot arm we have for sale. Contact us for further details. • Total installed power: 26 kW • Supply voltage: 400 V AC • Frequency: 50 Hz • Control voltage: 24 V DC • Working voltage: 24 V DC / 220 V AC • Operating pressure: 7 bar • Air consumption per cycle: 5.75 liters (NRA) • Maximum peak air flow: 62.5 liters/min (ANR) • Main control cabinet with PLC • Safety controller • Power supply units • Circuit breakers • Protection switches Lredpfxjyk Ut So Aqvsl • Industrial communication switch • Main pneumatic manufacturer: SMC • Cylinders: • SMC MGPM32TF-75Z • SMC MGPM32TF-175Z • SMC CD85N16-50-B • SMC LER50EJ-R5CL17 • SMC MXH16-30Z • SMC CDQMB16-30 • SMC MHS3-16D • Magnetic sensors: • SMC D-A93SAPC • SMC D-MP025C • Electronic pressure regulator: SMC ITV1050-ILF2 • Solenoid valves: • SMC JSY3200-5U • SMC JSY3100-5U • SMC JSY3100R-5U • Mechanical stops: red neoprene M8 (Ref. 507208-M) Additional equipment • Robot: 6-axis industrial articulated robot • Rotary table: TAKTOMAT RTF650-B-6-1SL90 • Gear ratio: 16 • Maximum inertia: 46 kgm²

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Lrjdpfx Ajwavqljqvel Hydraulics: Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Year of construction: 2025, condition: used, functionality: fully functional, machine/vehicle number: E22SJ25083247515, ATTENTION! DEMONSTRATION UNIT WITH REMAINING WARRANTY UNTIL 08/2027 ASK ABOUT YOUR TERMS AND CONDITIONS! The iCombiPro is the latest combi-steamer from RATIONAL. The iCombiPro 20-2/1 electric model with 20 GN 2/1 shelves or 40 GN 1/1 shelves is easy to operate, even for untrained staff, as it delivers outstanding food quality without the need for supervision. The ultra-fast intermediate and self-cleaning functions keep your unit sparkling clean. The RRP is €36,580 net. MAINTAIN LIQUIDITY – LEASING / HIRE PURCHASE POSSIBLE! ASK FOR AN INDIVIDUAL, NON-BINDING OFFER! Service: We are happy to refer you to a certified Rational service partner throughout Germany. Our equipment service for you: Manufacturer warranty until 08/2027 High-quality brand equipment at fair prices Professional and competent advice before and after the purchase Flexible choice of shipping or pickup Provision of user manuals, wiring diagrams & spare parts Trade-in of your combi-steamer from model year 2004 Complete range of accessories at attractive prices The iCombi Pro from Rational sets a new standard in intelligence, efficiency, and flexibility. TECHNICAL DATA: Lrjdpfx Aqjymmwzovel W x D x H: 1082 x 1052 (1117 including door handle) x 1807 (1872 including vent pipe) mm Power supply: V: 400 / Hz: 50-60 / kW:67.9 Weight: 263 kg Serial number E22SJ25083247515 FEATURES: Energy efficient: 60% lower energy consumption thanks to state-of-the-art thermal insulation Self-cleaning: The unit cleans itself fully automatically via an integrated program Operation possible without additional water softening system or extra descaling FURTHER INFORMATION: Temperature range: 30°C to 300°C Detects current cooking chamber conditions Recognizes the size, loading quantity, and product condition to determine browning Learns commonly used cooking routines and implements them Calculates the ideal cooking path for the desired result MyDisplay – individually configurable, user-specific control interface TFT color display and touchscreen User and operation manual accessible on the device display Core temperature probe with automatic error correction for incorrect insertion and positioning aid Glazed door compartment for energy savings LED interior lighting Includes energy consumption display Humidity control: precise humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps each Steam injection adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separator (no additional grease filter required) Cool-down function: rapid cooking chamber cooling Automatic adaptation to installation site (altitude, climate, etc.) Appliance door with ventilated triple glazing and swiveling inner pane Waste water fixed connection according to SVGW permitted Splash and jet water protection IP X 5 Separate solenoid valves for soft and hot water up to +30°C SHIPPING: Delivery or pickup by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: Ledpfx Aeu Tipkeqvjrl - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Lsdpfeuvi Sajx Aqvjrl Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Hydraulically shiftable gearbox for changing rotation direction Hydraulic reversing gearbox from lathe Year of manufacture approx. 1985 Change gearbox for quick reversal of rotational direction to right or left - electric hydraulic pump for hydraulic pressure generation (380 Volt, 0.25 kW) - 2 solenoid valves for switching from right-hand to left-hand rotation - fitted with pulleys Ø 230 and 200 mm - was operated with a 15 kW drive motor, enables rapid change of direction with high torque transmission - drive motor always runs to the right, gearbox is hydraulically shifted to right, left or set to neutral without activation Overall dimensions L x W x H: 480 x 520 x 430 mm Weight: 170 kg Good condition Lsdodz Sp Depfx Aqvorl

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) Lrsdpevc Axpofx Aqvol - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. Lsdpfx Aen E S T Ueqvjrl !!!! If you are looking for an electronic actuator programmer, ask me.

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 11 kW DCO-8L Overview Otinus DCO Dust Collector is a top level solution for industrial fume extraction systems. Powered by a SIEMENS-licensed motor, the duct collector creates the negative pressure to extract air contaminated with dust and harmful fumes from working area. The filtration process is carried out in a few stages. First, the air is directed to the inside of the unit through a spark arrestor, that slows down its flow and causes large particle to fall into the hopper. Small particles enter the filtration area with ultra-tightly adjacent cannister filters from well-known manufactures (H&V, Ahlstrom, TORAY). There, the air is cleaned and then transferred to other sections. The particles accumulated on filters are easily removed by a jet-pulse stream of compressed air controlled by solenoid valves with additional micro shaking of the filters. This solution greatly extends the life of filter cannisters and improves the cleanliness of the purified air. Particles that have fallen off the filters enter the hopper where they can be easily removed. Specifications - Well-known brand filters: H&V, Ahlstrom, TORAY - Filtration class F9 - Filtration accuracy: 99.99% - Airflow: 9000 m3/h - Tank pressure: 5000 Pa - Effective filtration area: 160 m2 - Motor: 11KW SIEMENS Lrsdovhcnzjpfx Aqvol - Hopper volume: 90 L - Machine weight: 1200 kg - Default spark arrestor width: 303 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 19,324 h, load capacity: 3,000 kg, lifting height: 3,110 mm, free lift: 1,600 mm, fuel type: diesel, mast type: duplex, construction height: 2,200 mm, power: 44 kW (59.82 HP), fork carriage width: 1,150 mm, empty load weight: 4,630 kg, total length: 2,700 mm, drive type: Diesel, construction width: 1,270 mm, Diesel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Transmission: Hydrostatic Speed class: 20 Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Solid rubber Front tires size: 27x10-12 Rear tires type: Solid rubber Rear tires size: 23x9-10 Description: Operating hours as read, viewing by appointment, transport available. For further questions, please call. 3rd valve, rear work lights, front work lights, roof cover, windscreen, half cab, solenoid valve, soot filter, full free lift, safety light, interior mirror, joystick, beacon, wiper, single pedal, LED, seat, Lredpfjywpwtsx Aqvel

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,676 h, load capacity: 3,500 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,450 mm, power: 45 kW (61.18 HP), fork carriage width: 1,150 mm, empty load weight: 5,050 kg, total length: 2,650 mm, drive type: Diesel, construction width: 1,240 mm, Diesel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Lsdpfx Aeywpwaeqvjrl Transmission: Hydrostatic Speed class: 20 Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 23x9-10 Description: Operating hours as read; inspection by appointment; transport available. For further questions, please call. On request: 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, partial cabin, solenoid valve, soot filter, full cabin, safety light, interior mirror, joystick, rotating beacon, wiper, LED, seat.

Condition: good (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm Lsdpfx Aqogh Dwvjverl -Weight: 7 kg

Condition: like new (used), Bosch solenoid coil 1824210059 Lrjdpfxelkchko Aqvsl - 2 pieces.

Condition: used, Year of construction: 2014, machine/vehicle number: F14/5T3MA1/A/01, controller manufacturer: Stäubli, controller model: CS8C, We are offering this used Stäubli RX160L industrial robot, year of manufacture 2014. - Series 160 - 6 axes - L-version arm length - 2 solenoid valves for compressed air - Painted in RAL 1028 textured paint - The safety fence around the robot and the steel frame + platform as shown in the photos are also included Ljdpfx Aqoyv Au Aevsrl If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 Lodjyhbp Uepfx Aqvorl -Solenoid valves: Type 573718 / 533342 5 pieces -Individual components: see photos -Price/Fee: complete -Dimensions: 150/140/H70 mm -Weight: 0.9 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 2,000 h, degree of automation: automatic, actuation type: electric, Horizontal Flow-Pack Packaging Machine – Complete Configuration • Complete horizontal Flow-Pack electronic packaging machine with rotary sealing jaws and top-mounted film reel holder, constructed with a painted steel frame (RAL 9007). • Cantilever construction: all mechanical transmissions located at the rear, fully separated from the product path. • Infeed conveyor belt, 2800 mm long, equipped with bridge and AISI 304 stainless steel side guides. • Pushers and pusher supports made from food-grade approved plastic material. • Hermetic longitudinal sealing system, achieved by three independent sets of rollers (Ø120 mm each): • First set: film pulling • Second set: sealing • Third set: guidance • Equipped with pre-heating system and cooling units. • Transversal sealing jaws, 300 mm wide, fitted with cutting knives. • Electronic torque limiter and low-pressure system on transversal sealing jaws. • Drive system with three Schneider Lexium 28 brushless motors: • One for infeed conveyor • One for longitudinal sealing rollers • One for transversal sealing jaws • Managed via 3 Schneider Lexium 28 digital inverters. • Automatic centering system for the film reel holder (600 mm opening), cantilever mounted on the upper section. Lredpfxsx Uy Udj Aqvol • Outfeed conveyor belt, 1 meter long, with separate motor and inverter control. • Safety guards made from impact-resistant plexiglass, equipped with safety micro-switches. • 7” color touchscreen with memory and recall functions for: • Machine speed • Bag length • Temperature setting • Jaw deceleration • Pusher position for progressive product discharge • Accessory activation • Program memory: up to 99 recipes • Adjustable forming box • Machine operation: left to right • Pneumatic components: FESTO • Manufactured in accordance with CE standards Technical Specifications • Power supply: 400 V, 3-phase, T+N • Packaging speed: • 80 pcs/min for products 220 mm (L) × 70 mm (W) × 70 mm (H) • 10 – 120 packs/min (depending on pack length) • Package dimensions: • Length: 80 – 600 mm • Width: 10 – 290 mm • Height: up to 110 mm • Machine dimensions (L × W × H): 3800 × 1000 × 1900 mm • Weight: 600 kg • Installed power: 3 kW • Voltage/frequency: 400 V / 50 Hz / 3-phase Optional Equipment / Additional Features • Printer interface and preview (signals and control via touch panel) for VIDEOJET 6330 • Belts on longitudinal sealing jaws for better product handling • Motorized film unwinding • Film mark photocell • Pre-installed for Modified Atmosphere Packaging (MAP) with gas pipe and solenoid valve • U-shaped slit sealing jaws • Automatic film reel centering

Condition: excellent (used), functionality: fully functional, Möhringer log and cant feeder, for singling and allocating round timber and cants to the carriage. Optimal separation even for different diameters. Complete with hydraulic unit and solenoid valves. Little use, from a small joinery workshop. Dismantled and loaded free on truck. Lrsdpfxeyfv A Rs Aqvjl

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, operating pressure: 280 bar, type of input current: AC, tank capacity: 360 l, input voltage: 400 V, space requirement height: 1,600 mm, space requirement length: 1,400 mm, space requirement width: 1,400 mm, pump capacity: 68 l/min, rotational speed (max.): 1,480 rpm, power: 11 kW (14.96 HP), Hydraulic Power Unit Manufacturer: Rexroth Mecman AB Model: A10V 0 45 DFR /31R-PSC62K01 Year of manufacture: 1998 Condition: very good (used) Functionality: fully operational Pump Manufacturer: Rexroth Pump Type: A10V 0 45 DFR /31R-PSC62K01 Max Pump Speed: 2600 rpm Pressure Regulator: with hydraulic flow control X-T open Direction of rotation: right (viewed from drive shaft) Lrjdpox Szxlofx Aqvol Flow Rate: 2 x 68 liters/min at 1450 rpm Operating Pressure: max. 280 bar Oil: ISO VG 46 Drive Power: 2 x 11 kW Electric Motor Speed: 1450 rpm Input Voltage/Frequency: 400 V / 50 Hz Tank Capacity: 360 liters Accumulator Capacity: 32 liters The unit is equipped with the following components: • 32-liter accumulator • Double filter unit with pump • Digital pressure transmitter • Dryer • Solenoid valves • Oil/water heat exchanger • Drip tray • Terminal box Dimensions (L/W/H): 1,400 mm / 1,400 mm / 1,600 mm Weight: 850 kg Variable displacement axial piston pump for hydrostatic drives in open circuit. The flow rate is proportional to the drive speed and the displacement volume is adjustable. The swash plate allows infinitely variable adjustment of flow rate. 2 leakage oil connections Good suction characteristics Low noise level Long service life Favorable power-to-weight ratio Comprehensive regulator options Short response time The through-drive is designed for mounting gear pumps or axial piston pumps of the same nominal size, i.e. 100% through-drive capability.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 66700 € 1260.63 € 150 to 500 mm 1.550 x 2.000 mm 800 mm 20 mm/s 3 mm/s 2350 mm 2000 mm 2500 mm 4100 kg horizontal verschiebbar 1550 mm 1000 mm 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH Lodpowirpiefx Aqvsrl OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Ljdoyhxppepfx Aqvsrl Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Condition: used, Year of construction: 2018, Overview  This brewhouse was manufactured in 2018 by Slovenian company SKRLJ d.o.o. The BH-3 brewhouse has a batch capacity of 20 hL and is designed as a semi-automatic system with steam heating. It includes all main process vessels and a wide range of accessories, making it suitable for medium-sized breweries. The system is currently available. Technical data Capacity: 20 hL per batch Hot water tank: 4,586 L, steam heating jacket Cold water tank: 4,400 L, glycol cooling jacket Heating: Steam Control: Semi-automatic with PLC Scope of Delivery  Brewhouse | SKRLJ d.o.o. | BH-3 | 2018 | 20 hL, semi-automatic, steam-heated Hot water tank | SKRLJ d.o.o. | – | 2018 | 4,586 L, steam heating jacket Cold water tank | SKRLJ d.o.o. | – | 2018 | 4,400 L, glycol cooling jacket Grist bin | SKRLJ d.o.o. | – | 2018 | 500 kg capacity 2-stage heat exchanger | SKRLJ d.o.o. | – | 2018 | Stainless steel Accessories: wort aeration system, spent grain remover, grist hydrator, CIP sprayballs, temperature probes, steam jacket solenoids, 2 sanitary centrifugal pumps, electronic flow meter, manual cold/hot water mixer with thermometer, PLC for pump/recipe/temperature control   Ljdpfx Aqexcng Ievsrl

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additional service by client’s technicians Scope of Delivery  Stretch blow-moulder SIDEL SBO 6 Series 2 Preforms tipper Preforms hopper & feeder Preforms infeed rail Caterpillar oven & blowing wheel Ledsyb Tbpspfx Aqvjrl