Used Shears For Punching Strips for sale (8,180)

Condition: used, Year of construction: 2013, control type: CNC control, controller manufacturer: ELGA, working width: 3,100 mm, sheet thickness (max.): 6 mm, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 210 bar, pressure (max.): 210 bar, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, We offer this used UZMA HSB 3006 guillotine shear, year of construction 2013. Type: HSB 3006 Year of Manufacture: 2013 Hodpfx Acozt Hguehenr Series Number: 1308144 Maximum Cutting Length: 3100 mm Maximum Cutting Thickness: 6 mm Maximum Hydraulic Pressure: 210 Bar Approximate Weight: 6000 kg Main Motor Power: 10 kW Voltage: 400 Volt Number of Phases: 3Ph + N + GND Frequency: 50 Hz Overall Full Load Current: 25 A Minimum Light Beam Distance from Blades: 1860 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2020, As good as new plate shear from Ermaksan. Type CNC HGS 3100 6 Hnjdpfxozunrhs Achjr Cybelec CybTouch 8 control system Safety guard Rear support table

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Hnodpfx Ajv Tp D Hjchor Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), Year of construction: 2007, Gebruikte pons knipmachine van Peddinghaus Hnsdszul Adspfx Achsr Type Peddimaster 110/170 Capaciteit ponsen 110ton Capaciteit knippen 170ton Inclusief zij aanslag en diverse gereedschappen

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Hnsdpfx Aezulx Ejcher Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Hnodpfx Acjzty E Dehjr Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Motor power: 5,5 KW Weight: approx. 3300 kg Hnjdpfx Ajztw Hxjcher

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler Hnsdpfx Acoydk Acohjr  Double-edged blades  Foot switch  Documentation

Condition: new, Year of construction: 2026, Alligator shear brand new Hnedpfx Acshq Nlgehjr AVAILABLE NOW, ex work IUT Beyeler AG, DE-06188 Landsberg Financing and rental possible. We are looking for used alligator shears! The McIntyre 407 Alligator shear is a non ferrous shear which is both affordable and efficient. It has a 407mm 16″ blade length and enough power and speed to handle a wide variety of cutting tasks. This versatile alligator shear was built originally for scrapyard use so is robust enough to withstand difficult working environments. It is now our most popular shear with thousands in daily use worldwide. The McIntyre 407 non ferrous scrap shear can handle: Automotive scrap Whole gear boxes Cylinder heads and blocks Oversized gate valves And of course all the usual non ferrous metal cutting tasks. It can also handle ferrous metals if needed.

Condition: new, Year of construction: 2026, TITAN DOUBLE Trade Industrial Company AB is a Polish manufacturer of modern professional equipment trusted by professionals in over 55 countries worldwide. Industrial printer TITAN DOUBLE is designed for inkjet large format contactless full-color CMYK printing. OUR ADVANTAGES = YOUR BENEFITS: TITAN DOUBLE The new printing machine from TICAB PRINT has two print heads. Now, you can print in a single pass on large items. Your benefits: • Enhanced workflows. • Wider range or samples to print on. • More comfort during printing. We are official partners of the Hewlett Packard Company. You can get the TITAN DOUBLE printing machines at the manufacturer’s price. Online education and full technical support is provided. KEY FEATURES of TITAN DOUBLE: 1) Average printing speed is 50 units per minute. 2) The opportunity to print from 1 copy without increased cost per piece. 3) No preparations or cliches are needed. 4) Low cost per copy is from 0.01 euro/unit (you will see an accurate amount on the monitor during printing). 5) Printing on different materials: paper, carton (assembled and disassembled boxes), textile, wood, and plywood. 6) Branded software from TICAB PRINT (included in the printer's price). 7) Printer's components and accessories of our own design and production. TITAN DOUBLE is an innovative printing system. It allows you to feed huge items beneath the printer head. Printer heads can be adjusted up to 10 cm above the conveyor belt. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches. and water after the image dries. Technical Characteristics of the Printer head: Print area width - up to 59.4cm (23.4 in) Print area length - from 2.54 cm (1 inch) to 91.44 cm (36 inch) Workpiece movement speed - up to 45.72 cm (18 in) per second Printing speed - up to 50 arc\ min A4, up to 16 arc\ min A3 Print resolution - 1200x1200dpi Colors - CMYK (Cyan, Magenta, Yellow, Black) Ink type - water-based pigment ink Information connection - Ethernet 10/100/1000 Base-T network port Operating system - Windows (recommended Windows10) Hewlett Packard HP driver TICAB software: The current status of the printer is being monitored. Number of prints is calculated - the total and the current task. The calculation of the value of ink consumption. Monitoring the current level of ink in the cartridges. Starting the printer nozzle maintenance and cleaning functions. Starting the procedures for replacing the cleaning mechanism. Calibrate the printer nozzles for linearity and color uniformity. Start the procedure for high-speed printing of a large number of copies. Hnjdpfsvt Uvzox Achsr

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in)  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch) Hsdpfx Aceu Ibhwjhenr  Workpiece movement speed: up to 45.72 cm (18 in) per second  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each)  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port  Operating system: Windows (recommended Windows10)  Hewlett Packard HP driver  Trusted by professionals in 55 countries worldwide!

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm Hnodpfx Aceibitmohjr -Round steel: up to approx. 20 mm -Rectangular profile: up to approx. 19x19 mm -Lever arm: with rack and pinion transmission -Overall dimensions: 455/170/H1540 mm -Transport dimensions: 1230/170/H440 mm -Weight: 49 kg

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Hnodpfx Ast Tqkdochsr Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm Hodjww Nccjpfx Achsnr quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1997, sheet width 0610 mm Hedoxu Nrpspfx Achenr plate thickness 1,5 mm distance between columns 650 mm front stop - adjustable 0- 300 mm angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm Hnjdeydqn Sjpfx Acher notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm table height over floor 1015 mm Number of downholders 8 St. Hodpjt Tqnvsfx Achonr cutting angle 0,5 - 2,5 ° total power requirement 12 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device.

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Hjdpfx Asy I Nugschsnr Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, We sell directly. Make-Ready Table for Bobst 106 E/ER We offer a professional table for the pre-preparation and alignment of die-cutting tools, as well as a cleaning section located outside the die-cutting machine. This device reduces the machine setup time (make-ready) of the Bobst machine by up to 30-40%. Technical data and specifications: Compatibility: BOBST 106 E /ER (SP / Novacut / Visioncut / SPeria series) Working format: Max. sheet format 1060 x 760 mm. Basing system: Fully compatible with the Centerline II system (fast and precise tool centering) Construction: Stable, steel frame with an ergonomic work surface and shelves for accessories/frames Included equipment: Basing strips and millimeter scales Clamping system Additional elements - additional frames (without the tools visible in the pictures, i.e., pins and telescopes) Technical condition: Condition: Excellent, 100% technically sound, locking mechanisms operate smoothly. Location of the device: Dąbrówka / Poznań, Poland Logistics and delivery Delivery terms: EXW (self-collection by the Buyer) / Possibility of arranging transport at the Buyer's expense. Hedpfxszuwazj Achenr Availability: Immediate (the table is secured and ready for loading).

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of manufacture: 2006 Condition: used Operating hours NC hours: 70,305 h Beam-on hours: 17,217 h Control: Siemens Sinumerik 840 D Punching force: 220 kN Laser power: 2700 W Working area, laser operation approx.: 2585 x 1280 mm Working area, punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support table, brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate drive with integrated linear magazine, 21 positions for tools and clamping elements 1 clamping element Maintenance-free three-phase servo motors Part eject chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF Laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick-change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Punching head: Hydraulic mono-tool holder, 360° rotation Programmable stripper Tool spray lubrication Hnjdpfoxwmuajx Achsr Punch slug extraction Control: Sinumerik 840D 10.4″ TFT color display Teleservice Automatic shutdown 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Rapid shutdown, hydraulics Compact dust extraction system Options: Automatic shutdown Threading former Softpunch Adaptive stroke calibration Follow-up cylinder Individually opening clamps Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (parallel loading and unloading) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreader magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser hours: 27,000 h, including Sheetmaster, Gripmaster, and Toolmaster Hodpfx Ajzr Ha Ejchsnr Year of manufacture: 2007

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Hnedpfxjwpd Tye Acher For further information you can of course also contact us personally.

Condition: excellent (used), functionality: fully functional, overall weight: 8,000 kg, Equipment: documentation/manual, emergency stop, The machine is in working order. Hsdpfxezrxdio Achonr

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm Hodozryy Sopfx Achenr

Condition: used, Set of 5 x 2 knives, as good as new Hodpszrymlsfx Achsnr Technical data: - Length: 100 mm - Width: 30 mm - Thickness: 3.5 mm