Guillotine shear

CIDAN HSM-F 15/3.0

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Rcsdpfowpku Djx Ap Eof Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Thickness of tenon 30 mm total power requirement 0,75 kW Rsdst U R H Uspfx Ap Escf Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run)

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 0304/5599, functionality: fully functional, controller manufacturer: Delem, controller model: DA-65, working width: 3,000 mm, bending force (max.): 105 t, control type: CNC control, degree of automation: automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, european tool clamping system, Crowning: Reflex - ACSG1 Rcjdpfxexv Eafs Ap Ejf Priključna moč: 11 kW Tools: Possible with agreement. NEW UPPER TOOL HOLDERS. Last service: 05/2025.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Erlo SEAR 25-RS drill, gear drill with automatic feeds, includes threading system, spindle speeds 64-3060 rpm, with chuck and protection, machine in very good condition, year 2006 Rcedpfxsv Rnhxs Ap Eof

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, controller manufacturer: Cybelec, controller model: Cybtouch 12, working width: 6,000 mm, bending force (max.): 300 t, control type: CNC control, number of axes: 4, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Used 6metre x 300ton Adira Cnc Press Brake - Hydraulic Pressbrake 300 Ton 6000mm bending Length Back gauge: X and Z Axis Upgraded touch screen control Cyblec CybTouch 12 Control System Year of Manufacture - 2005 Rodpfewu Ua Usx Ap Escf Good service history including rebuilt ram cylinders, rebuilt crowning and upgraded control system Euro tool clamping

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, Rcsdpfx Aoxlcp Nep Eef recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: good (used), Rolling width: 2050mm Rcjdpfx Aswtpgtsp Eef Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: used, Year of construction: 2008, machine/vehicle number: 32063, functionality: fully functional, operating hours: 28,800 h, power: 42 kW (57.10 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, table length: 6,100 mm, total length: 8,000 mm, total width: 3,200 mm, total height: 3,800 mm, overall weight: 35,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, For sale is a powerful and reliable CNC press brake, type LVD PPEB 320/61, ideal for precise bending operations in sheet metal processing. Rjdszhtlgepfx Ap Eocf Manufacturer: LVD Model: PPEB 320/61 Control: CNC Design: robust, industrial design Suitable for: heavy-duty and large-format bending operations Technical data: CNC-controlled back gauges Hydraulic upper and lower tool clamping system Safety features in accordance with industrial standards 5 axes Press force: 320 t Bending length: 6,100 mm Frame width: approx. 5,050 mm Stroke: approx. 250 mm Installation height (table–ram): approx. 500 – 570 mm Condition: The machine is in used, operational condition. Regular maintenance has been performed. Inspection under power is possible by arrangement. Application areas: Steel and metal construction Mechanical engineering Series and single-part production Manufacturing of large-format sheet metal parts Advantages: High press force for demanding applications Large working length for a wide range of applications Proven LVD quality and reliability Precise CNC control for reproducible results Accessories: WITHOUT prism and blades Terms of sale: Price applies ex foundation Dismantling, removal, loading, and transport are the responsibility of the buyer Inspection possible by arrangement Delivery according to EXW (ex works)

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s Rjdpfxjx S H Uxs Ap Ejcf - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 34 mm, total length: 230 mm, total width: 2,400 mm, saw band length: 4,700 mm, saw band width: 1 mm, Selling a MEBAMAT 330 12,500 operating hours The machine has cut 99% of plastic. You can find the machine's technical specifications at MEBA. Redswhix Eepfx Ap Ejcf