Used Support - Longitudinal - Transverse - for sale (15,207)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Rjdpfsi Ri I Nsx Anyscf Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: excellent (used), Year of construction: 2003, x-path 350 mm y-path 240 mm z-path 340 mm Control Siemens Type 810 D Total power requirement 15 kW Machine weight approx. 1.6 t Space requirement approx. m Universal CNC tool milling machine Type DMU 35 M - 810 D Working range: X-axis (longitudinal stroke of milling slide) 350 mm Y-axis (transverse stroke of milling slide) 240 mm Z-axis (vertical stroke of table slide) 340 mm C-axis - table rotation, manual 360 ° B-axis - table swivel, manual + 105 / -15 ° Rcjdpfxju Rdpij Anyef Table surface (rounded) 280 x 400 mm Table load approx. 100 kg Tool holder SK 40 Spindle speeds stfl. programmable 20 - 6,300 rpm Feed values / rapid traverse stls. 20 - 5,000 mm/min. Feed drive/power 1.6 Nm AC main drive approx. 10 kW Total drive approx. 15 kW - 400 V - 50 Hz Weight approx. 1,600 kg Accessories / special equipment: - SIEMENS path control type 810 D (Processor 840 D) for interpolation in 3 axes with electronic handwheel screen, swiveling control panel, SIEMENS SHOPMILL software (version 05.03.22) with additional DECKEL MAHO Programming area for quick and easy workshop programming. - Manual tool change with SK 40 holder, pneumatic tool clamping - Universal table, manually rotatable & tiltable via handwheels and digital position display position display on the control screen (rotary encoder), enables 5- side machining in one clamping operation - Complete enclosure of the machine with 2 sliding doors, unfortunately currently no coolant tank available as the machine was connected to a central system. was connected to a central system. operating instructions

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar Rcodpsu Id Ruefx Anyof total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: new, Year of construction: 2026, functionality: fully functional, Headstock lathe KRAFT FB-15/20/25/30, brand new · 1500-3000mm faceplate · CNC or conventional. BRAND NEW HEADSTOCK LATHE KRAFT FB SERIES – FOR LARGE FACEPLATE WORKPIECES, FLYING UP TO 2 T The KRAFT FB series economically processes large, flat workpieces such as brake discs, flanges, wheels, bearing rings, or drum components. Four sizes with turning diameters from 1,500 to 3,000 mm and workpiece weights up to 2 t (flying) cover single-piece production to medium-sized series. Available as a conventional or CNC version (Siemens, Fanuc, or Fagor), optionally with or without a tailstock, bed longitudinally or transversely. KEY FEATURES Robust construction - Machine bed made of MEHANITE cast iron in one piece, bed width 450 mm, heavily ribbed - Hardened bed guideways, stress-relieved annealing - Guarantees long-term, highly precise operation without warping High-precision main spindle – accuracy class G1 - Inductively hardened, spindle bore up to 230 mm (option) - Spindle head in a compact design, large surface cross-ribs Powerful drive - Spindle motor 22 kW (29 kW optional), up to 600 rpm, high torque - Stepless spindle speed as standard CNC-capable from the factory - X/Z servomotors from Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Flying workpiece machining – the headstock lathe advantage - Workpieces clamped directly on the spindle head, without a tailstock - Optimal for flat, disc-shaped components with a large diameter OPTIONS CNC Siemens/Fanuc/Fagor · constant cutting speed · PARAT tool holder · C-axis + driven tools/milling unit · tailstock · spindle bore Ø 230 mm · spindle motor 29 kW MACHINE DATA – FOUR SIZES KRAFT FB-15 - Turning diameter/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z-axis travel: 1,000 mm - X/Z servomotors: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Turning diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z-axis travel: 1,000 mm - X/Z servomotors: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Turning diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z-axis travel: 1,500 mm Rodpfec Txdhsx Anyecf - X/Z servomotors: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Turning diameter/faceplate: 3,000 mm - Spindle speed: 4–400 rpm - Z-axis travel: 1,500 mm - X/Z servomotors: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, dimensions: 3000 × 3200 × 3350 mm COMMON DATA FOR ALL SIZES Turning length 330 mm · max. workpiece length 450 mm · bed width 450 mm · flying workpiece weight max. 3,000 kg · cross slide width 250 mm · X-axis travel 330 mm · spindle bore 155 mm (230 opt.) · spindle nose A2-11 (A2-15 opt.) · spindle taper 7 MK · 4 spindle speed stages · spindle motor 22 kW (29 opt.) · rapid traverse X/Z 6/8 m/min · 4-position tool holder, tool shank 32 × 32 mm CUSTOMIZABLE TO YOUR REQUIREMENTS Send us your specific application – workpiece spectrum, accuracy, desired control – we will configure the FB series according to your needs. Attractive leasing and hire-purchase conditions available through our partners. On request, delivery including installation, commissioning and training of your operating personnel.

Condition: new, SERRMAC TCS and TC Drilling and Milling Machine (Cross Table) New, “CE” certified 3-year warranty Automatic feed High-efficiency transmission and electronic variable speed drive via vector inverter. Coolant system for cutting tools Threading via inverter, complete with digital tachometer Threaded spindle axis for CM4 tool clamping Cross table: 800 x 255 mm Drilling capacity in R50 steel: ø 50 mm Tapping capacity in R50 steel: M 26 Spindle taper: CM4 Spindle stroke: 145 mm Rcodpfxjfh Si Uj Anyof Spindle shank diameter: 72 mm Automatic feed: 3 speeds: 0.05 – 0.1 – 0.2 rpm Automatic feed with electromagnetic clutch: 3 speeds: 0.05 – 0.1 – 0.2 mm/rev Prismatic column Cross table Inverter drive Spindle speed: 45 – 2150 rpm Motor power (380 V – 50 Hz): 3 kW “T” slot dimensions: 14 x 14 mm Cross table: longitudinal travel, manual axis X: 585 mm Cross table: transverse travel, manual axis Y: 240 mm Dimensions (h x w x d) with column: 1,986 x 1,340 x 1,280 mm Weight: 780 kg

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Rcodpfx Anofkg H Teyof Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank We offer you a used pallet racking beam from the manufacturer Vogelsang for sale. Technical data for the pallet racking beam: Manufacturer: Vogelsang Type: NS Included in the scope of delivery: 01x Pallet racking beam, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm Max. load per beam pair: 2,700 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting Our services at a glance: (Prices on request) Assembly, installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading) Rcsdpfx Ajfq Du Dsnyof

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min Rcsdpfxotv Iibj Anysf feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: refurbished (used), Year of construction: 2000, KEKEISEN Universal Bed Milling Machine UBF-R 2000/13, machine no. F42460; year 2000 well maintained, very good condition, mechanically overhauled 2023 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Transverse travel of the headstock (Y-axis) 1200 mm Vertical travel of the headstock (Z-axis) 1300 mm Rotary table size 1260 x 1260 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rsdpjrm Sigsfx Anyecf Rotary table load 4000 kg Spindle power 30 kW (100%ED), max. torque 1200 Nm Spindle speed 20 - 4000 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 12 m/min rapid traverse CNC control Heidenhain TNC 426M with electric handwheel HR 410 Drive systems make Siemens Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 270 litre collecting tank Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 50 kVA without installation elements (fixators), without assembly and commissioning Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: new, Year of construction: 2026, Large-scale welding robotic systems High-dynamic robotic, multi-axis automated welding system. KBWELD HDC is a console-type linear-drive system with a robust construction with precision guides. It achieves high speed and accuracy thanks to digital servo-controlled motors. KBWELD HDC6 has a wide range of applications - complex, ribbed beams with slopes, panels, boards, ribbed sections; For straight and circular seams, various building elements, machine housings and more. Number of axes (all in interpolation) - 6 Axis type - 3 linear and 3 rotary for torch Motor type - AC, servo synchronous motors Motion principle - Rack and pinion on linear axes, high precision cycloid reducers on rotary axes Longitudinal stroke (along the rail) - on request Transverse stroke - Y axis - 2000 - 4000 mm Vertical stroke - 1500 - 2500 mm Rotation range around Z-axis +/- 360 ° Range of torch tilting angle +/- 90 ° Linear axes speed range 0 – 30 000 mm/min Rotary axes speed range 0–120°/s Positioning accuracy +/-0.3 mm/m Repeatability +/-0.1 mm Supply voltage 3-phase, 380V +/-10%, 50Hz Nominal consumption 3.5 kW PROCESS MANAGEMENT • A library of settings that includes all parameters • Welding speed, power source parameters • Ability to change the welding mode during welding • Arc start delay • Delay of motion at the arc end for the crater filling time • Separate control of arc burning times and cold wire feed in TIG process • Weaving function with frequency and amplitude adjustment • Seam (part) search function with touch sensing with wire , gas nozzle or other sensor • Seam tracking through arc current and weaving motion ▲ WELDING EQUIPMENT OPTIONS: 450A KEMPPI A7 - PULSED MIG/MAG WELDING - Full welding parameters robot control Mains connection voltage 3~ 50/60 Hz 400 V, -15 …+20 % Supply current (maximum) 32 A Supply current (effective) 25 A Fuse (delayed) 35 A No-load voltage (peak) U0 = 80 V – 98 V Open circuit voltage (average) 85 V – 103 V Operating temperature rang -20…+40 °C Degree of protection IP23S Efficiency (100 % duty cycle) 87 % Power factor at max. current 0.88 OR ▲ TANDEM (TWIN-WIRE) WELDING MIG/MAG EQUIPMENT 2 x 450A KEMPPI A7 - Full robot control ▲ ROBOTIC PERIPHERALS OPTION: 1-axis Servo-positioners - payload on request from 500 to 6000kg 2-axis Servo-positioners - payload on request from 250 to 2000kg DESCRIPTION KBSPOS500 Payload 500 kg Number of axes 1 Type of motor AC, servo Max Torque 860 Nm Max Load inertia 100 kgm2 Max Speed 70°/sec Flange diameter 400 mm Rjdoh Imyaopfx Anyscf DESCRIPTION 2-axis Servo-positioner KBS2AxPos 500 Number of axes 2 Type of motor AC, servo Payload 500 kg Max Torque Axis 1 1700 Nm Max Load inertia Axis 1 400 kgm2 Max Speed Axis 1 30°/sec Max Torque Axis 2 860 Nm Max Load inertia Axis 1 100 kgm2 Max Speed Axis 1 70°/sec Flange diameter 400 mm ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 10 days

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: Vogelsang Type: NS Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: cream white Crossbar type: K110 Box profile: 110 x 50 mm Clip: 4 HK (hooks) Clear width: 2,700 mm Max. load per crossbar pair: 2,700 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports Rcsdeibbd Hopfx Anyjf against unintentional lifting out.

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Meta (Thyssen) Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: orange INP profile: 120 x 58 mm Agraffe: 3 hooks Clear width: 2,700 mm Maximum load per pair of crossbeams: 3,000 kg, with evenly distributed load Rsdpfx Aneibmhfsyjcf 02x Safety pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting.

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection Rcedpfx Aneu Ix Rpoyjf - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: good (used), T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm Rjdpfxocbqqxj Anyecf -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg

Condition: new, Machine according to DIN 8605: Lathe with increased accuracy. Distance between centers: 700 mm Distance between centers: 170 mm Swinging diameter over bed: Ø 340 mm Swinging diameter over carriage: Ø 190 mm Bed width: 260 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Carriage length: 410 mm Carriage width: 150 mm Guide length of bed carriage: 380 mm Lathe tool shank cross-section: 20x20 mm Distance from lathe center to top slide: 34 mm Swiveling range of top slide (rest): 60/120° Main spindle: Spindle mount DIN 55029 (camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in the front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 RPM Speed control: Stepless Mechanical speed steps: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Rcjdpfx Ajdctnbjnysf Threads: 20 (28) metric threads (standard equipment): 0.4 - 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Arbor diameter: Ø 50 mm Internal taper of arbor: MK 3 Arbor travel: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Suspended: 50 kg Supported by tailstock: 150 kg Further standard equipment (standard accessories): Includes machine stand and integrated 3-axis digital display, German language, with color display 1 length stop 1 center, taper 1:22, DIN 7178 1 center MK3 1 chuck key 1 key part 1 grease gun 3 hexagon head screws M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 simple tool holder 1 key A13x17 DIN 837 1 open-end wrench SW 19 1 open-end wrench SW 22 1 hexagon screwdriver SW 5 1 hexagon screwdriver SW 6 1 hexagon screwdriver SW 8 3 shear pins 1 box wrench 1 operating manual incl. parts list 1 electrical documentation 1 test report Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Illustrations show special equipment / accessories, among other things!

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Rjdpfxo Nh Hxs Anyocf Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,230 kg, maximum load weight: 14,770 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 870 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, *Wechel Central-Axle Trailer Chassis Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locks height-adjustable by approx. 120 mm for parking height 1070 mm, lifting height then approx. 1150 mm, and driving height then approx. 990 mm; foldable with center supports. Includes guide rollers that can be inserted into center supports (locking mechanism from the Vario chassis at the rear) 4 container locks with sturdy arms on a 20" base for swap bodies 7.15 / 7.45 and 7.82 1 pair of front transmission support legs, with straight lower section and single-sided operation on the right rear Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection Half-shell fenders 1 spare wheel holder for 1 electric bike, with wheel mounting kit 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock. (Lock not included) *Towing equipment for central-axle trailer Towing beam with certified 50 mm tow eye, freight transport version (not suitable for trucks with tail lifts; detailed verification may still be required when placing an order) Towing beam lower coupler, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension SAF drum brake axles “Laser-aligned axles/chassis” Reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the motor vehicle, connection at FR-right EBS, Electronic Brake System with EBS connector at the front, with connecting cable, connection at FR-right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability System *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at the rear right 2 additional LED work lights at the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light Rodjzd Uyqopfx Anyecf *Operating Instructions The specified total weight is technically possible; however, depending on the cargo, the total weight may not be reached while complying with the permissible axle, support, and fifth-wheel loads. (Poor handling and tracking may result from improper load distribution) *Country of Registration/License Plates Germany With DEKRA approval and certification (in accordance with §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: good (used), Code: 0403 Brand: SICAR Model: BRAVA 350/3 - CE Standard 3-works combined machine (Surface planer /Thickness planer /Mortiser) for wood, joinery, furniture, joinery fittings, plastics and various – CE Standard Technical specifications: Working width 350 mm Work surface length 1600 mm Tilting of fenknives Knives dimensions 350 x 20 x 3 mm Thickness planer table dimensions 350 x 660 mm Max working height 220 mm Min working height 7 mm Feed speed 7 mt/min Router: Table dimensions 250 x 500 mm Longitudinal stroke 200 mm Transversal stroke 100 mm Vertical stroke 90 mm Chuck 16 mm Chuck rotation speed 5700 rpm Workpiece clamping presser Three-phase motor 2,2 Kw Overall dimensions mm 1700 x 950 x 1000 h Redpfxezcfwxe Anyecf Weight kg 340

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Redpfx Anoy R U Absyocf Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500

Condition: used, mileage: 3,21,661 km, power: 315 kW (428.28 HP), first registration: 02/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, * ABS * ASR (traction control) * Radio * Cruise control * Hill-start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Roof hatch * Driver comfort seat * Seat heating * Trailer coupling * On-board computer * Central locking * Rear window * Amber beacon * Sun visor * Longitudinal and transverse differential locks * AP axles * Air horns * 2-line air connection * Off-road driving program * Hydraulic connection for trailer Rodpfx Aoy Dwlxjnyocf * 12-speed * Suspension: leaf/air * Payload: 12,260 kg * Continuous brake: High Performance Engine Brake ----Special body: Crane: Atlas 126.3 E, folding, radio remote control, triple hydraulic extension, fully hydraulic stabilizers, 6th and 7th control circuit for slewing and grab operation. Load chart (read values): Lifts 5.6t at 2m, 3.13t at 3.8m, 2.11t at 5.5m, 1.6t at 7.2m, 1.28t at 8.9m. ----Body: VDL hook-lift S-14T-5000 for 4.5–5.5 m container length, 14,000 kg lifting capacity, push arm, extendable underride guard at rear, internal controls. ----Tinted windscreen Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see legal notice/imprint) form the basis of all contracts of sale, invoices, pro forma invoices, orders, and sales discussions.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, feed length X-axis: 2,500 mm, feed length Y-axis: 1,400 mm, feed length Z-axis: 1,500 mm, spindle speed (max.): 4,000 rpm, table load: 5,000 kg, CNC: SELCA 4045PD AXES TRAVELS X-axis longitudinal travel: mm 2500 Y-axis transverse travel: mm 1400 Z-axis vertical travel: mm 1500 TABLE Table size: mm 1200X1200 Load capacity: kg 5000 Number of divisions: 360.000 T-slots: No. 7 – pitch mm 127 Table axis motor power: kw 6 KOSMO 5 AUTOMATIC BI-ROTARY HEAD Continuous power: kW 28 KOSMO head spindle speed: giri/min 4.000 Plane positioning with HIRTH serration Rear plane rotation: 2,5° Front plane rotation: 3° Tool taper: DIN 69871-A50 Drawbar: DIN 69872-28 (50) PALLET CHANGER: DCN 100 CP MACHINE COMPLETE WITH • Electronic handwheel • Electronic thermal expansion compensation device for the head • High-pressure through-spindle coolnat • Chip conveyor: Double front and rear chip conveyor • Sidesalpa tool machine – 40 positions • Full enclosure Rcsdpfx Ajzg Hqyjnyjf • Instruction manuals • CE declaration of conformity

Condition: new, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space volume: 22 m³, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, tail-lift, Welcome to carmax24! Today you have the opportunity to purchase one of our carefully selected and inspected vehicles. Independently assessed and high-quality vehicles have ensured a high level of customer satisfaction since 2008. That is our daily approach, as you as a customer are always our top priority at carmax24. Specification | Renault Master L3 Engine & Drivetrain * Blue dCi 170 HP (125 kW), Euro VIe * 6-speed manual transmission * Front-wheel drive (FWD) * Diesel, AdBlue Exterior * Color: Mineral White * 16'' steel wheels with hubcaps * LED daytime running lights and dipped beam * Partially painted front bumper * Extended exterior mirror arms * Electrically adjustable & heated exterior mirrors * Single rear wheels Interior & Comfort * CORE fabric upholstery * Manual air conditioning * Suspended driver’s seat * Double passenger bench – “Mobile Office” * Multifunction steering wheel, adjustable for height & reach * Electric front windows * Central locking * 12V power socket * 3.5'' TFT driver display Multimedia * OpenR Link multimedia system with 10'' touchscreen * Wireless smartphone mirroring * Inductive smartphone charging station Safety & Assistance * ABS, ESP, ASR * Emergency brake assist * Lane departure warning system * Traffic sign recognition * Fatigue alert * Cruise control with speed limiter * Tire pressure monitoring * Rain & light sensor * Rear parking sensors * Driver airbag * Wide-view interior mirror Cargo Area & Body * Steel bulkhead with window * Conversion package (body preparation): * Extended wiring (+65 cm) * eCall antenna integrated in the exterior mirror * Connector in B-pillar * Towbar pre-installation * Full-size spare wheel * Steel sump guard Body – Platform body with tarpaulin (9 pallets) * Platform/tarpaulin body on Renault Master L3 FWD * Designed for 9 Euro pallets * Suitable for transport, logistics, and trade businesses Construction & Materials * Aluminium sideboards, height 400 mm, symmetrically split * Vertical cassette locks * Floor made from non-slip phenolic plywood, 15 mm * Waterproof, film-coated underside * Sealed with silicone * Subframe and longitudinal beams made from aluminium profiles (System 70/90) * Foldable entry step at rear tailboard * Cab rear wall protection made from three-part aluminium profiles Tarpaulin & Frame * Aluminium stanchions, upper frame, and tarpaulin support bows * Customs-compliant tarpaulin, silver color (RAL 9006) * Tarpaulin weight: 670 g/m², manufacturer SIOEN * Semi-transparent tarpaulin roof for improved lighting Load Securing & Protection * 10 steel lashing rings mounted in the surrounding profile * Plastic wheel arches with mud flaps * Wooden interior slats, 3 rows in height Additional Body Features * Side underrun/forklift protection beams, foldable * Quick-release center stanchions * Toolbox approx. 45L * Water tank with faucet and soap dispenser * Extended rear light bar (steel, galvanized, painted) * Adjustable internal height (CARPOL system, lift approx. 30 cm) * BAR tail lift, covered by tarpaulin * LED interior lighting in cargo area * Additional vehicle battery * Tachograph * Reversing camera Redpfx Aozhq Tujnyscf Body Dimensions (Internal) * Length: 4,500 mm * Width: 2,200 mm * Height: 2,300 mm Body Dimensions (External) * Length: 4,550 mm * Width: 2,270 mm * Height: 2,360 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Working area of the table: 500 x 300 mm Max. distance between table and spindle: 450 mm Longitudinal feed rate: 1 - 20 m/min Rjdpfx Ajzgr Spenyecf Transverse feed rate: continuous: 0.2 - 2.0 m/min Stroke rate: 0.5 - 10 m/min

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm), towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Braking System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights Rcedpszfp Uxsfx Anysf 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated via reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration / License Plates Germany With DEKRA inspection and certification (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Hot-dip galvanized frame, including passivation “15-year warranty against rust-through” Drawbar: galvanized or black, at the manufacturer’s discretion Customized transport solution

Condition: excellent (used), functionality: fully functional, Robust Möhringer slat conveyor system. Length 11.20 m. Slat length 2.0 m. Overall height 1.0 m. Rcodpfjzg Drnox Anyof Equipped with integrated lifting and lowering transverse conveyors with 5 chain strands, hydraulically operated. Discharge to the left and right. 4 hydraulically lifting and lowering model support rollers. Split drive with 2 geared motors.