Used Ucimu Center Lathe for sale (17,728)

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 37 mm, turning diameter: 360 mm, center width: 750 mm, spindle speed (max.): 3,000 rpm, Visue Newall 2 axes Ledpjyimzvofx Abyjhl Capacity: 750x360 mm Spindle bore: 37 mm Variable spindle speed up to a maximum of 3000 rpm

Condition: good (used), Year of construction: 1999, functionality: fully functional, A used L&Z lathe, model BULMAK Type: C 8 C, machine number: 8018, year of manufacture: 1999, complete with steady rests, three-jaw and four-jaw chucks, and a 2-axis digital display. Ljdpfjzx Enzex Abyjhl

Condition: good (used), functionality: fully functional, Type 4 Technical data : Center width approx. 400 mm Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Ljdpfezt Sytjx Abyohl Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm Lhedpjqwlmqefx Abyel above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Praktikant 160 AC lathe, manufactured in 1996, with a 3-axis Heidenhain digital display, three-jaw chuck, Multifix system, rear splash guard, electric chuck guard, collet chuck system with a set of collets, and change gears. The machine is in good, operational condition and can be demonstrated under power by arrangement. Lhsdpfx Aozpfw Dsbyol

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Lodpfjy Rpr Rex Abyshl Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 650 mm center height over bed 140 mm centre distance 650 mm bed width 155 mm spindle taper KK 4 CAMLOCK DIN 55029 spindle bore 40 mm turning speed range - stepless 4.000 U/min 4-jaw-chuck diameter 140 mm quick change toolholder MULTIFIX Typ A drive capacity - spindle motor 7,5 kW taper in tailstock-quill MK 2 dia. of quill 30 mm quill stroke 80 mm voltage 400 V total power requirement 7,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment Ljdpfxoz Abwyo Abyehl - Digital speed display - MULTIFIX quick-change tool holder

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm Lhodpjzu Rr Dofx Abyjl turning diameter over support: 300 mm turning length: 1500 mm center height measured in bed: 250 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 3,05 t dimension machine approx.LxWxH: 2,6 x 1,1 x 1,3 m

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 104 mm, turning diameter: 870 mm, turning diameter over bed slide: 1,150 mm, Geminis GE 870 S lathe, with a 4000mm center distance, featuring a complete cast iron bed, dimension display, 870mm swing over the bed, automatic feed on the carriage, rapid traverse on the slides, a quick-change tool turret, 580mm swing over the cross slide, 1100mm swing over the tailstock, 340mm tailstock length, and speeds ranging from 16-1250 rpm. The spindle bore diameter is 104mm. It is equipped with a 3-jaw chuck with a 400mm diameter and a quick-centering mechanism, as well as a 4-jaw independent chuck with an 800mm diameter. It also includes 2 fixed steady rests and an additional universal 3-jaw chuck with a 315mm diameter. The main motor has a power rating of 18.5 kW. Overall, the lathe is in very good condition. Ledpfozmp Hksx Abyjhl

Condition: excellent (used), functionality: fully functional, Distance between centers: 1500 mm Center height: 220 mm Spindle bore: 52 mm Tailstock quill: MK 4 Ljdpfjzyyabox Abyehl 18 speeds: 25 - 2000 rpm Pole-change motor: 2.9 / 5.9 kW with gap bed bridge

Condition: used, Year of construction: 1967, turning diameter over bed 0560 mm turning diameter over slide rest 300 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 12- 1150 U/min total power requirement 5 kW Lhsdpfsw H Di Aox Abyel weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With multifix holder, chuck and turning center.

Condition: used, Year of construction: 1981, machine/vehicle number: 283, Item No. 26208 Technical Data: - Maximum turning height 120 mm - Maximum turning diameter 450 mm - Maximum swing over bed 250 mm - Spindle bore 23 mm - Spindle mounting with threaded nose DIN 55027 - Taper of tailstock spindle MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - transverse 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Footprint approx. approx. W 1200 x H 1250 x D 650 mm - Weight approx. approx. 700 kg - Including: - 3-jaw chuck - Quick-change tool holder - Rotating center Lhodpfx Aozyl H Hobysl - Separate tool cabinet with various accessories

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Precision Lathe RML 1640V – Comprehensive Equipment Description: This machine is ideally suited for tool manufacturing, training workshops, maintenance departments, as well as precise single-piece and small-batch production. Features: - 3-axis digital readout - 3-jaw chuck with internal and external jaws - Coolant system - Removable gap bridge - Hardened and ground bedways - Fixed steady rest - Live center - Multifix quick-change toolpost - Slip clutch for feed overload protection - Foot brake - Machine work light - Bed stop with micrometer adjustment - Toolmaker’s accuracy according to DIN 8605 - Two-tone paint: Blue (RAL 5012) / Grey (RAL 7032) - CE conformity - German operating manual and spare parts list Technical Data: Swing over bed: 410 mm Swing over cross slide: 264 mm Swing in gap: 533 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle bore: 52.5 mm Spindle mount: D1-6 DIN 55029 Cross slide travel: 220 mm Spindle speeds: 20 – 2500 rpm Number of speed ranges: 2 Speed range 1: 20 – 400 rpm Speed range 2: 400 – 2500 rpm Motor power: 3.7 kW Tailstock quill diameter: 52 mm Tailstock quill travel: 152 mm Quill taper: MT 4 Machine weight: 1400 kg Thread cutting range: Metric: (39) 0.2 – 14 mm Whitworth: (45) 2 – 72 TPI Diametral Pitch: (21) 8 – 44 DP Module: (18) 0.3 – 3.5 MOD Lhedpfx Asyudwbsbysl Other: Inspection by appointment. The machine is ready for immediate use.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 5V0168, MACHINE SPECIFICATION Height of centres 280mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm Width in front of faceplate 216mm Bed length between centres 2000mm Spindle speeds: number 3 Spindle speeds: ranges 18-200,55-605, 160-1800rpm Spindle nose mounting Camlock D1-11 Spindle bore 104mm Taper in nose bush No. 5MT Width over bedways 400mm Travel of cross slide 300mm Travel of top slide 175mm Travel of tailstock barrel 178mm Tailstock in tailstock barrel No. 6MT Approx. Weight 3650Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 4-off toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard Lhedpfxjzna Two Abyjl

Condition: used, Year of construction: 1976, turning diameter over bed 455 mm turning diameter over slide rest 285 mm turning length 1.000 mm center height over bed 225 mm centre distance 1.000 mm digital readout 2-Achsen ANILAM bed width 330 mm spindle taper KK 6 DIN 55027 spindle bore 45 mm turning speed range 16 - 1.000 U/min power requirement 3,0 / 4,2 kW taper in tailstock-quill MK 4 dia. of quill 62 mm quill stroke 145 mm voltage 400 V total power requirement 4,5 kW weight of the machine ca. 1,95 t dimensions of the machine ca. 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION!!! Machine is sold without a chuck. Upon request and for an additional charge, Lhsdpfxjy Ezyvj Abysl the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Lhodszmm A Nepfx Abyel

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Lhedoy Hxp Dspfx Abysl Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws Lhjdsyyb T Sepfx Abyel >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop Ledpfeyylq Usx Abyjhl About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1974, Parallel lathe SKODA SIU 160 x 8000 mm Number of guides: 3 Swing over bed: 1,620 mm Swing over cross slide: 1,250 mm Distance between centers: 8,000 mm Maximum weight between centers: 40,000 kg Spindle speed: 0.45 – 224 rpm Accessories: steady rests Lhsdjzw Uifspfx Abyol Video showing the machine in operation is available.

Condition: good (used), Year of construction: 1965, LZ lathe, manufactured by HEID, type VK56, year of manufacture 1965. Maximum distance between centers: 550 mm Distance between centers: 1000 mm Spindle speeds: 7-710 rpm / Spindle motor approx. 15 kW / Spindle brake. Four-jaw chuck, diameter 800 mm, Röhm. Rapid traverse in longitudinal and cross directions. Lsdpfx Abozw E Ifjyshl Coolant system, various accessories. Shipping weight (total): approx. 7000 kg.

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Lsdpfjy Ar Niox Abyjhl Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: used, Technical details: turning diameter over bed: 230 mm turning diameter over support: 135 mm centre distance: 2000 mm Lodpfxozvnq To Abyshl spindle bore: 60 mm tailstock quill taper MT: MK 5 tailstock quill adjustment:: 300 mm total power requirement: 5,5 kW weight of the machine ca.: 2,5 t dimension machine approx.LxWxH: 3,7 x 1,20 x 1,30 m • 4 change gears installed • No taper turning attachment • 3-jaw chuck: Ø 350 mm • 4-jaw chuck: Ø 315 mm • Coolant system available *

Condition: used, Year of construction: 2022, turning diameter over bed 540 mm turning diameter over slide rest 340 mm turning diameter in the gap 800 mm length of gap 350 mm turning length 3000 mm turning speeds 40-1800 U/min bed width 340 mm 3-jaw chuck 255 mm spindle passage 52 mm No. 65 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Lhjdpfx Aeyq Sxxjbysl About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Weiler Primus Excellent condition! With accessories Lsdpfx Aoyy Ngtjbyshl