Used Zeulenroda Pye 160 Ss for sale (11,374)

Condition: used, pressure 100 t throat 355 mm Guodpfstqm Dhox Al Asd stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height - with die cushion - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"

Condition: used, pressure 63 t throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min Gjdpfxotqm Dqs Al Ajud table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW weight of the machine ca. 5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec Gsdpoxuhzcjfx Al Asud - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Godpsyqw Sqefx Al Asud Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: used, Year of construction: 2022,

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Guodpfx Ajvvuzcjl Asd Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm Gsdpoyayumjfx Al Aeud

Condition: used, Year of construction: 1998, pressure 40 t stroke 250 mm total power requirement 6 kW weight of the machine ca. 3 t distance between columns 600/350mm mm table surface area 860x620 mm ram surface 860x620 mm table height 900 mm Guedpfx Alovnwfns Asd

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN503674, Year of construction: 2015, operating hours: 6,784 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,651 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,241 mm, power: 30 kW (40.79 HP), gearing type: converter, DGUV certified until: 01/2027, fork length: 1,150 mm, tire condition: 80 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 2,958 kg, empty load weight: 2,958 kg, total height: 2,241 mm, color: yellow, Equipment: CE marking, UVV, lighting, pallet forks, sideshift, Price: €13,000 net €15,470 gross SKU: 440 Basic Information: - Manufacturer: Jungheinrich - Model: TFG 316 - Year of manufacture: 2015 - Operating hours: 6,502 h Technical Specifications: - Drive: LPG (liquefied petroleum gas) - Transmission: Torque converter - Pedals: Single pedal control - Control: Solopilot - Battery: - Charger: Mast / Dimensions: - Overall height: 2,241 mm - Lifting height: 5,000 mm - Free lift: 1,651 mm - Mast type: Triplex mast - Fork length: 1,150 mm - Rated capacity: 1,600 kg - Load center: 500 mm Tyres: - Type: Superelastic tyres Hydraulic Equipment: - Sideshift: Integrated - Fork positioner: No - Rotator: No - Additional hydraulics: "No. 3 present and unassigned" Equipment: - Superstructure: - Lighting: - Safety equipment: - Heater: Extras: - UVV inspection available new on request - Immediately ready for operation - Inspection and test drive on site possible by appointment Transport: Low-cost shipping available on request. Gsdpsyftudefx Al Aeud Invoice with VAT: You will always receive an invoice with VAT shown separately. Battery: For battery-powered equipment, we are happy to offer you an option including a new battery. Contact: If you have any questions or are interested, please contact us by phone, email or the contact form.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, overall weight: 16,000 kg, controller model: Cybelec DNC 800, working width: 3,000 mm, bending force (max.): 160 t, distance between stands: 2,650 mm, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Gujdpfx Ajzk A Ivsl Aod Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Tool package Side safety doors

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,950 mm, total width: 1,630 mm, total length: 6,040 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dimensions Width: 1.63 m Height: min. 1.72 m to max. 3.52 m Height increment: 5 cm Length: min. 2.68 m to max. 15.17 m Length increment: 48 cm Additional length for the storage table: 0.30 m Noise Emission Average sound pressure level Lp,m: 48.3 dB(A) Loading and Unloading Loading time: approx. 3 s Unloading time: approx. 8–12 s Number of packages that can be unloaded simultaneously: max. 9 Rectangular Packages Package dimensions: min. 35 × 15 × 15 mm Package dimensions: max. 230 × 140 × 145 mm Package weight: min. 5 g to max. 1,000 g Round Packages Package diameter: min. 45 mm Package height: min. 15 mm Package diameter: max. 140 mm Package height: max. 145 mm Package weight: min. 5 g to max. 800 g MACHINE DETAILS Electrical Data Mains connection: 1~ 230 V Mains frequency: 50/60 Hz Current consumption: 8 A Gusdpfx Alezlghps Asd Power Consumption Power consumption during operation with one gripper: 650 W Power consumption during operation with two grippers: 780 W Power consumption in idle mode with one gripper: 348 W Power consumption in idle mode with two grippers: 379 W Conveying Technology Diameter of the spiral slide: 400 mm Supported barcodes: PZN, PZN8, EAN, and 2D barcodes Overall dimensions (L × W × H): 6,040 × 1,630 × 2,950 mm EQUIPMENT Uninterruptible power supply (UPS) Backup Drive Remote monitoring Mobile access to myRowa for support purposes Manual package output Conveyor belt Servo-controlled lift mechanism Spiral slide For further data, please refer to the manufacturer's data sheet in the attachment.

Condition: used, Year of construction: 2020, functionality: fully functional, AL-2400 mm SS PP Spun-Bond Machine Line ( Filament 1.5D-1.8D ） -Raw Material： Polypropylene granule，master batches，additive -Production Process: With high temperature filament drawn, certain proportion of polypropylene, master batches and additive are drawn into net by negative pressure, which are boned together being into fabric by calender. -Annual Output: 4800 Tons/Year（30gsm） -Fabric GSM: 9-60 g/m2 Guedpfx Alszlg Iie Asd -Installed power: Around 1500KW

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Godpfx Ajzc Nywel Asud Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, CATALOGUE NUMBER 7905 Technical data: - max cutting height 160mm - max element width 700mm - working width of the saw mandrel 600mm - mandrel diameter 70mm - max saw diameter 450mm - from above: - feed pawls - 2 toothed feed mandrels - pressure roller with metal sliding guide - from below: - sliding guide roller - feed pawls - toothed feed mandrel - saw mandrel - smooth feed mandrel - metal sliding guide roller - 6 feed speed settings - feed motor 0.9kW - main motor 45kW Gedpjzlp N Asfx Al Aoud - overall dimensions (L/W/H) 1500x1350x2000mm - weight approximately 2695kg ADVANTAGES – Polish production – Robust construction – Used machine, very good condition Net price: 55900 PLN Net price: 13310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Year of construction: 2026, condition: new, Wravor 20-160 – robust and reliable industrial circular - edger and multirip saw in one machine, designed for professional primary board processing. The machine is suitable for accurate and high-capacity edging and ripping of boards and cants in demanding industrial production. Technical data: - main motor: 30 / 37 / 45 / 55 / 75 kW - cutting thickness: 20 – 160 mm - max cutting width: 900 / 1000 / 1250 mm - number of movable blades: 1-4 (hydraulic or servo drive system for precise and flexible cutting adjustment) - computer setting of cutting width - heavy-duty and stable construction, Gjdpfxey Rku He Al Aoud - high cutting precision, - excellent productivity, - reliable operation for continuous industrial use, - different options for mechanisation (mechanic or automatic conveyors) The machine can operate independently or as part of a complete sawmill line with automatic transport systems.

Condition: used, Year of construction: 2022, total length: 6,680 mm, · Arbeitshöhe 16.02 m · Plattformhöhe 14.02 m · Maximale seitliche Reichweite 8.30 m · Ãœberhang / Knickpunkt Gelenk 7.50 m · Korbarm-Drehwinkel (oben / Boden) +65 ° / -59.50 ° · Tragfähigkeit des Arbeitskorbs 230 kg · Drehung des Oberwagens 350 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Zulässige Personenanzahl (innen / außen) 2 / 2 · Gewicht der Arbeitsbühne 6160 kg · Gegengewicht Versatz (Oberwagen bei 90°) 0.22 m · Gegengewicht Aufmaß / Reichweite 0.22 m · äußerer Wenderadius 3.75 m · Fahrgeschwindigkeit – Transportmodus 5 km/h · Fahrgeschwindigkeit – Arbeitsmodus 1 km/h · Steigfähigkeit 45 % Guodpszluvnofx Al Aed · Zulässige Neigung im Arbeitsmodus 5 ° · Bereifung Schaumgefüllt · Reifenmodelle 834 x 298 mm · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Gebremste Räder / Räder 0 / 2 · Hersteller / Motor Modell Kubota - D1105-E4B · Motornorm Vorläufige Stufe 4, Stage IIIA, Stage V · Nennleistung Verbrennungsmotor / Leistung 24.50 Hp / 18.50 kW · Bodendruck 11.60 dan/cm2 · Hydraulikdruck 340 bar · Fassungsvermögen des Hydrauliktanks 54 l · Fassungsvermögen des Kraftstofftanks 52 l · Schallpegel an Arbeitskorb 105 dB · Umgebungsgeräusch (LwA)< 105 dB · Täglicher Verbrauch 4.08 l

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,459 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,370 mm, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, trailer coupling, Diesel forklift TOYOTA 02-8FDF25 Year of manufacture: 2014 According to meter reading: 8,459 operating hours Godpozi Izfsfx Al Asud 2.5 tonne lifting capacity 2.37 meter overall height 5.50 meter lifting height 36 kW - Triplex free-lift mast - Side shifter - Fork adjustment - Full cabin with heater (1 door) - Lighting system - Original paint - Ready for immediate use Selling price: €12,900.00 net Affordable delivery also possible!

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min Gsdoywadwspfx Al Ajud

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Cutting height 160 mm Chain bed approx. 420 mm Gujdoucnudspfx Al Aed With spikes in the chain bed Including slat bush and spacer rings Main engine 75kW

Condition: new, Year of construction: 2024, load capacity: 16,000 kg, lifting height: 5,555 mm, total length: 8,100 mm, · Spurweite (c-c), vorn – hinten (mm) 1855 – 1960 · Wenderadius, außen – innen (mm) 5175 – 600 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 8770 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5 – 10 · Seitenverschub ± bei Breite über Gabelblatt (mm) 415 – 1530 · Achslast vorn, ohne Last (kg) 10500 · Achslast vorn, mit Nennlast (kg) 35800 · Achslast hinten, ohne Last (kg) 11900 · Achslast hinten, mit Nennlast (kg) 2600 · Luftdruck (Mpa) Hydraulikservo – Lenkrad · Typ – gebremste Räder Ölgekühlte Lamellenbremsen (Wet disc brakes) – Antriebsräder · Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräde · Hydraulikdruck Max. (Mpa) 18 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen* (l) 15 · Motor Leistung ISO 3046 – bei Drehzahl (kW – rpm): 164/233 – 2200 · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm): 945 – 1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6 – 6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Kupplung, Typ: Drehmomentwandler · Getriebe, Typ: Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts: 3 - 3 · Lichtmaschine Typ – Leistung (W) AC-1960 · Anlasserbatterie: Spannung – Kapazität (V – Ah) 2×12 – 150 · Ergonomisches Lenkrad: Es ist verstellbar und kann auch zu einer Seite geklappt werden. Dies verringert die Belastung des Fahrers beim Fahren und Zurücksetzen. Gujdpfxszlk Sls Al Aod · Komfortable Pedale: Ein neues, flexibles und sicheres Pedalsystem mit verstellbarem Pedalwinkel. Verbessert die Ergonomie und minimiert die Belastung der Füße des Fahrers. · Hochleistungs-Scheibenwischer: Sorgen für eine 90%-ige Deckung der gekrümmten Frontscheibe. Dachscheibenwischer sind auch integriert. · Ergonomischer Mehrfunktionssitz: Drehbar und voll integriert. · Klimapaket: Vollkommenes und flexibles Klimatisierungssystem, das den hohen Ansprüchen der klimageprüften EGO-Kabine genügt. Größere Lufteinlässe. Problemloser Filtertausch an der Maschinenfront. Vollkommener Fahrkomfort dank hervorragend dimensionierter und konstruierter Baugruppen. · Bedienkonsole: Problemloses Einstellen, Anpassen, Nutzen und Begreifen. Alle erforderlichen Bedienelemente, Schalter, Hebel und Anzeigen sind für effizientes Arbeiten leicht zugänglich. · Bedienungspult: Die vollendete Einheit für Fahrer, die das Minilenkrad oder den Lenkhebel nutzen. Integrierte Schaltknöpfe. Für optimale Ergonomie uneingeschränkt verstellbar und individuell getestet. Das ergonomische Lenkrad wird ohne Sichtbehinderung nach vorn geklappt. · Optimierte Sicht: Vollständig neues offenes Design. Mit cleveren Profilen und gekrümmten Front- und Heckscheiben. Optimierte Sicht aus allen Winkeln – mit außergewöhnlich guter Sicht diagonal nach vorn und nach hinten. Starkes Freiluftgefühl · Cummins‘ neue Dieselmotoren für EU Stage IIIB / EPA Tier 4i: Die neue Cummins-Dieselplattform kombiniert eine gekühlte Abgasrückführung mit einer verbesserten Hochdruck Common-Rail-Kraftsto0anlage (HPDR) und einem Partikelfilter. Dies ermöglicht eine sauberere und effzientere Verbrennung, die einen um bis zu fünf Prozent geringeren Kraftstoßverbrauch ohne Einschränkung der Leistung bewirkt.

Condition: used, Year of construction: 2016, machine/vehicle number: 200-0052, overall weight: 26,000 kg, This ZEULENRODAER PRESSTECHNIK double-column press, type PYZ 250 F, is being auctioned online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology - Presses and Metalworking facility. Gedpfx Aszk H Uasl Ajud You can find this and many other items on our platform.

Condition: used, Year of construction: 2017, operating hours: 38,672 h, machine/vehicle number: 214631, overall weight: 1,200 kg, This ENGEL Insert 500V/160 rotary vertical injection molding machine is being auctioned off online as part of our industrial auction/machine auction due to the closure of the J&S GmbH Automotive Technology facility. Guedpfjzk Hg Nex Al Asd You can find this and many other items on our platform.

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Guedsy Nkuwspfx Al Ajd Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, For sale: a boiler, a UNICONFORT brand water heater. Gjdozluz Depfx Al Aeud

Condition: like new (used), Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake Manufacturer: Bystronic Model: XACT Smart 160/3100 Serial number: XACT 22040SE Year of manufacture: 02/2022 Technical specifications: Maximum pressing force: 1600 kN Maximum working length: 3100 mm Maximum stroke: 200 mm Rapid traverse speed: 140 mm/s Guedpjy U I Tbefx Al Ajd Working speed: 1–10 mm/s Return speed: 115 mm/s Machine weight: 10,500 kg