Used 3 Transport,2 Needle,Flat Bed Sewing for sale (1,08,263)

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 660-2,910 mm Width 1,960 mm Forks 1,200 mm ID OS1947 Itodeyzvmcspfx Aahei

Condition: used, Thread taps for pipe threads Pilot and finishing taps Itedpodk Rdvsfx Aahji R 2 3/4 inches

Condition: excellent (used), overall weight: 14,000 kg, total height: 455 mm, total length: 5,500 mm, total width: 2,420 mm, T slotted bed plate STOLLE - DT-4/2 T slotted cast iron floorplate 4000 x 2420 x 455 mm Floorplate Length: 5500mm Floorplate Width: 2420mm Height: 455mm No. Of T-slots: 6 Distance from T to T-slot / Jump:400mm T -slot size: 42mm Weight a plate approx.: 14000kg Number of matching pieces: 2 Length: 5500mm Width: 2420mm Height: 455mm Weight: 14000kg Itodpfx Aaozc Ibmohji Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Siemens 1FT5103-0AF01-2, 3-phase permanent magnet motor, serial number as shown in the photo, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Itsdoi D Taaspfx Aahji

Condition: ready for operation (used), Danaher Motion KT4030-10 high-frequency converter SN: K4030-24003-2 – IN 3 x 230-480V / 32 A / 50-60Hz, used, in good condition, 100% fully functional, delivery scope as shown in the photos. Itjdpfx Aex Eq Ezeahji

Condition: ready for operation (used), Siemens 1FT5066-0AF71-2-Z 3-phase permanent magnet motor with Heidenhain ROD 426.2010-2500, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 19 mm, used, normal signs of wear, 100% functional. Itsdpfei D Sgajx Aahji

Condition: ready for operation (used), Yokogawa DX220-3-2 DAQSTATION, Style S4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Ijdpfxsy T Dpco Aaheti

Condition: ready for operation (used), Yokogawa DX220-3-2 DAQSTATION, Style S4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Ijdpsy T Dpijfx Aahsti

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper AG 0303, unused in original packaging, 100% functional, scope of delivery as per photos Itsdpox Eudhjfx Aahei

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper HA 030135, unused in original packaging, 100% functional, scope of delivery as shown in photos. Ijdpox Eudnefx Aaheti

Condition: ready for operation (used), Electro Adda FV71FE-8/2, 3-phase motor with Bonifiglioli bevel gear unit MVF 49/P (i=7), serial number as shown in the photo, mounting hole spacing: 63 x 63 mm, drive shaft diameter: 30 mm, used, normal signs of wear, 100% functional. Iodei D Htcjpfx Aahsti

Condition: new, Siemens 1FT5076-0AF01-2-Z, 3-phase permanent magnet motor, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Isdpfxsi D S Dhs Aahoti

Condition: ready for operation (used), Siemens 1FT5066-0AF71-2-Z 3~ permanent magnet motor with Pfeffer + Partner RPL 20-1 H/VU gearbox, hole spacing of mounting holes: 85 x 85 mm, diameter of drive shaft: 32 mm, gear ratio i = 7, used, with significant signs of wear, 100% functional. Iedpfxji D Sf So Aahsti

Condition: new, Eaton XN-2AI-PT/NI-2/3 input module SN 42369-70 Part No. 140067, unused in opened original packaging, 100% functional, scope of delivery as per photos Ijdpfspnpl Rjx Aahsti

Condition: ready for operation (used), Yokogawa DX220-3-2 DAQSTATION, Style S4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Iedoy T Dn Sopfx Aahsti

Condition: new, functionality: fully functional, machine/vehicle number: NEW-25, empty load weight: 1,170 kg, maximum load weight: 2,330 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 406 204 3500 2 HD E Three-sided tipper NEW VEHICLE Internal dimensions: 406cm x 204cm Side board height: 35cm Loading platform height: 71cm Total weight: 3500kg Payload: 2330kg Braked tandem axle trailer Overrun brake and parking brake from AL-KO Largest possible axle and brake Extended axle support Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile side boards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Heavy-duty support wheel 500kg 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED outline lights at the front LED lighting at the rear Upper frame mounted on rubber Large tilting angle of 44 degrees backwards Lateral tilting by repositioning the safety pins Electric tilting control with plug for charging the 12V battery Electric limitation of the tilting angle to the side U-rail for attaching the original SARIS ramp Preparation for ramps OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Leaf springs -Spare wheel with holder -Without side boards (price reduction) -Black Edition (Powder-coated side boards and rims in black) -Integrated ramps 2800kg -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Folding crank rear supports Iodpfxezg A I Uj Aahjti -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in different heights, also closed -Extension side boards 30cm with tension lock -Flat cover with or without bow -High cover 180cm or 200cm More accessories available on request! Plus shipping to Gera and vehicle registration document €380 net Images are for illustrative purposes only and may show optional accessories that incur an extra charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock for you to take away. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come by!

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, Itsdpfoi Riytex Aahei ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 32,225 h, machine/vehicle number: 756 71 004, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Prima power, controller model: Nc Express / Tebis, laser type: CO₂ laser, laser source model: Prima power, laser hours: 9,996 h, laser power: 4,000 W, laser wavelength: 600 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, input voltage: 400 V, input current: 62 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 10,000 mm, total width: 4,000 mm, total height: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, Prima Power Domino LSR 2-3, a highly flexible and precise 5-axis 3D laser cutting machine, ideal for complex trimming and cutting of formed sheet metal components.Machine in good working condition, the machine is production today and will be available from 25/10 -2026 Iodpfx Aajzg Hivjheti

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 06/2023, next inspection (TÜV): 01/2027, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, mileage: 86,347 km, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available for rent from 4 weeks onwards – immediate availability – contact O. Schinke. Rent – please contact Mr. Schinke. Ijdpezhknrofx Aahjti Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, access ramp 1,300 mm, Rear loading ramps 2950 x 1,700 x 900 mm, access angle approx. 11 degrees, hydraulic ramp lift, ramp hydraulically adjustable, Lubrication aid, Smart Board, loading platform extension, Spare wheel holder, including spare wheel, storage box, 1 front support: telescopic support, aluminum alloy, for coupling, 2 foldable rear support legs with spring holder, to operate the hydraulic components, a suitable truck hydraulic system with forward and return lines is required (not included in the scope of supply). Also available for long-term rental! Contact us – we will provide you with our individual offer. * ABS * Axle steering on the 2nd and 3rd axles * Lateral impact protection * Rubber-metal pads on the loading ramps * Plastic toolbox * Single lift axle * Platform side panels * Hydraulic ramp lift * Ramp hydraulically adjustable * Spare wheel holder * Rotating beacon * SAF axles * Smart Board * Supports * Warning package * Central lubrication system We explicitly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee; subject to changes, prior sale, or errors. We strongly recommend and offer an inspection and examination so that no false impressions arise about the condition and suitability with the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. We will take care of all formalities and hand over the vehicle with the desired transport license plates for an extra charge. The images have been partially edited and are only for initial viewing; if you are interested, please contact us and request current images.

Condition: good (used), mileage: 3,70,717 km, power: 375 kW (509.86 HP), first registration: 10/2019, fuel type: diesel, fuel: diesel, gearing type: automatic, number of gears: 16, emission class: euro6, Year of construction: 2019, Unladen weight: 12,240 kg Iodpfx Aaozhrd Uehjti Technical condition: good Optical condition: good Please contact Maarten Busser or Niels Busser for further information.

Condition: ready for operation (used), Year of construction: 2006, Offered is a Fehlmann CNC universal milling machine. Travel X/Y/Z/W: 700mm/315mm/178mm/495mm, feed rate X/Y: 9m/min, feed rate Z/W: 4m/min, rapid traverse X/Y: 9m/min, rapid traverse Z: 4m/min, table dimensions X/Y: 1130mm/350mm, max. table load: 250kg, spindle taper: SK30, tool positions: 32, max. speed: 9200rpm, spindle power: 5kW, drilling capacity in steel: 30mm, reach: 370mm, distance table-spindle: 620mm, control: Heidenhain. Weight: approx. 3400kg. Inspection possible by appointment. Itedpfx Aezgwyrsahoi

Condition: good (used), 3 kW Itedpfx Aasylcn Tshei 1.500 UpM 8,7 - 52 UpM 444-800 Nm

Condition: used, This listing is for a second-hand ‘ModulMounter ApS’ flatbed laminator Iedpfx Ajzap Uvjahjti Item for sale: 1 x ModulMounter ApS with the following features: Includes lighting Folds away for space-saving storage Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530 i, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, MIKRON VCE600PRO machining center with 3+2 axes (on table) X travel 600 Y 450 Z 540 mm, SK40 with 10,000 rpm and ATC 24 tools. Excellent condition. Ijdsqi Ufxepfx Aahjti

Condition: used, axle configuration: 3 axles, first registration: 10/1998, total length: 11,500 mm, total width: 2,550 mm, total height: 3,300 mm, suspension: parabolic leaf (spring), tire size: 315/65 R22,5, Year of construction: 1998, Equipment: ABS, Tire size: 315/65 R22.5 Iodpfxjzg Ik Ue Aahsti Suspension: Parabolic leaf spring suspension Unladen weight: 5,820 kg Payload: 28,180 kg Gross vehicle weight (GVW): 34,000 kg Dumper: Rear-mounted