Used Ajce Hammer for sale (508)

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING - Initial diameter : 15 - 75 mm Lsdjymacwepfx Ahtohk - Pointed diameter : 10 - 50 mm - Force : 25 tons - Cycles per minute : 800 - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Model of introduction duo: R25 Tools: Rotating hammers

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. Lodpfx Aheymac Rotohk The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS100 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 100 Mp Number of strokes: 560/min Diameter for round point: 20 - 170 mm Diameter for folded point: 35 - 200 mm Diameter of reduced section for both point types: Max. 110 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. Lsdpfxoymadhj Ahtshk We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS40 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 40 Mp Number of strokes: 710/min Diameter for round point: 12-90 mm Diameter for folded point: 20-120 mm Diameter of reduced section for both point types: Max. 60 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Liebherr Likufix SW33 Adapter Plate / NEW / In Stock & Immediately Available Price: €4,690.00 net / €5,581.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW33 adapter plate is pre-fitted for 4 lines - Also available from stock with a connector for a leakage oil line! Surcharge: €375.00 net - Excavator class: 8t – 20t - Weight: 160 kg Suitable for many attachments such as hydraulic hammers, sorting grabs, as well as for the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. Mr. Herden (Tel. ...) will be happy to advise you. On request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for OilQuick, Holp, Gierking GMT, Weber MT, Westtech, DMS, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! = Further Information = Lsdpfx Ahsykhucetjhk Intended use: Construction Please contact Marius Herden for more information.

Condition: used, Year of construction: 2013, operating hours: 8,577 h, JCB 8061 TRACKED EXCAVATOR Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2013 ? BETRIEBSSTD. 8577 Std EQUIPMENT: ? Radio ? AIRCONDITION ? Joysticklenkung ? Hydraulikleitung für Schnellwechsler Lhodpfx Aew I I Nhohtjk ? Hydraulikleitungen für Hammer/Greifer/Schere ? Rückfahrkamera TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Lodpfx Ahsqmi Irotshk Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine The machine has a wobble head and a 750mm diameter grinding disc. Loderpi E Aspfx Ahtjhk The machine can be used to polish the surfaces of hard stone and soft stone (marble). polished, satinized and bush-hammered with the appropriate tool.

Condition: good (used), Oiler, line oiler, line oiler, eco line oiler -Oiler: Line oiler for demolition hammers or other pneumatic tools -Number: 3x oilers available -Price per piece Ljdpjt Snvzofx Ahtshk -Dimensions: 450/110/H100 mm -Weight: 3.1 kg/piece

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4", 3/8", and 1/2", including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4", 3/8", and 1/2". Drawer 3 Open-end/ratchet wrench set (approx. 8–22 mm), double box-end wrench set, and torque wrench. Drawer 4 Precision, slotted, Phillips, and Torx screwdrivers in various sizes, including soft-grip versions. Drawer 5 T-handle hex/Allen key set with ball end and T-handle Torx set (T10–T40). Lhsdju Img Sspfx Ahtok Drawer 6 Pliers and hand tool set: circlip pliers (internal/external), combination and needle-nose pliers, side cutters, pipe wrench, claw hammer, and center punch set.

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Ljdpsrah S Hefx Ahtohk Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivered without wooden panels. Text, line break with the following data: Included components: - 1 double rail (zero stop) - 10 perforated rails - 10 toothed rack tensioners - 14 adjustable stop blocks - 14 interchangeable pressure plates, outer wall - Battery-powered impact wrench - Bit adapter - 50 dowels MMS 10x70/5 - Hammer drill 8x165 Dimensions: Clamping length from 0 to 3,550 mm Hole spacing 140 mm with panel width 1,250 mm = table length 12,350 mm max. clamping force approx. 250 kg Stroke length of tensioner 340 mm Height of stop blocks 100/160 mm The frame construction aid was developed to enable precise manufacturing of wooden frame construction elements. Particular attention was paid to the space required and the price. Thanks to the extremely flat design, it is now possible to use the area differently by removing the tensioners and stop blocks. This is not only an advantage for small businesses, but for all company sizes. After creating a level surface, the clamping rails are aligned and anchored to the floor. The spaces in between are filled with a 30 mm thick wooden panel, which is to be installed on site. At the edges, ramps can be attached with the same panel. The resulting level surface can also be used with heavy vehicles or as a storage area. This means that the space for wooden frame construction can only be activated when needed. The steel parts are galvanically zinc-coated. The entire assembly takes place on site. After adjusting the table, the stops must be pinned in place, as they could otherwise be adjusted by the force of the tensioners. Packed in wooden crates, ready for EU shipping. Delivery free to your door within Germany. Made in Germany. Ledpfxjb Nrbne Ahtehk See data sheet for details.

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible Lsdefhql Topfx Ahtohk + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: used, Demolition hammer, chisel hammer, Bosch hammer, mortise hammer, pointed chisel -Length: 410 mm Lhedpfxsfc R Dvo Ahtek -Width: 36 mm -Hexagon socket: 30 mm -Price: per piece -Number: 6 pieces -Dimensions: Ø 46 x 460 mm -Weight: 1.7 kg/piece

Condition: good (used), Approx. 452 Meta shelving units, 1m x 0.40m / 0.60m - used: Lsdski Txcjpfx Ahtohk Price per shelving unit: €8.00 (net)! Minimum order quantity: 50 pieces Manufacturer: Meta Type: Meta Clip Year of manufacture: unknown Depth: 60cm Width 1m = approx. 52 pieces Depth: 40cm Width 1m = approx. 400 pieces The shelving units show some wear and tear at the mounting points for the shelf supports, and some are slightly bent. However, a tap with a hammer should be sufficient to allow them to be reattached without any problems. Height: approx. 4cm Load capacity: unknown – should be able to support at least 100kg Condition: good Available: immediately Location: Frankenberg / Saxony

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,300 mm, Tool holder: ISO 50 automatic B-axis Lhodsy Rz Siepfx Ahtok manual C-axis

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring Ljdszb Rbtjpfx Ahtehk spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: excellent (used), Suteau Anver XPM CE - hydraulic press, cutter, die cutter for cutting various types of soft or medium-hard materials such as foam, sponge, rubber, felt, leather, cardboard, etc... Robust French manufacture Pressing force: 100 Ton Working area: 1600mm x 800mm Max stroke: 120mm Max clearance between hammer and table: 150mm Ljdpsviyifjfx Ahtjhk Weight: about 6400kg For the machine full manufacturer's documentation Machine in very good technical condition after full service The possibility of assistance in the organization of transport

Condition: new, working width: 1,05,000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at ...). Seppi M. H3 105 Mulcher / incl. rotation motor / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic boom - Mulches grass and brush up to 3 cm Ø - Suitable for excavators from 2 to 5 tons - Compatible with various mounting plate systems - Floating mount (parallelogram guide) - Indirect V-belt drive with 3 V-belts - Drive suitable for hydraulic motor depending on the carrier machine's hydraulic flow - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable Lhsdpfxoyix Hte Ahtjk - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pcs., part number 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and "DRAIN SAFE TM" motor safety valve protects the motor in the event of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!) - Including hoses and check valve OPT 372 Hydraulic 190° rotation device Optional: MS03 adapter plate incl. intermediate flange, bolts and installation = €700 net Two hydraulic lines are required: supply and return. No drain line needed! Additionally, a separate hydraulic circuit is required for the rotator. The machine is delivered without hoses or couplings. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide selection of various Seppi M. products available from stock! Feel free to contact us at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for more information.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 511001M, nominal power: 160 kW (217.54 HP), Complete and fully functional Lindemann ZB 120 x 100 - 160kW Schorch drive - Voith fluid coupling - Feed steel slat conveyor - Cyrus extraction vibrator - Axle puller - Hydraulic unit Lodpsyizcqefx Ahtohk - Spare grates - Hammers - Various wear parts

Condition: new, Year of construction: 2022, pressing force: 100 t, Estimated Equipment Weight 3500 Kg Ledpohmi T Uofx Ahtjhk Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: used, mileage: 32,169 km, power: 137 kW (186.27 HP), first registration: 09/2024, fuel type: diesel, number of seats: 34, gearing type: automatic, next inspection (TÜV): 09/2026, emission class: euro6, color: white, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ? REAR PARKING SENSOR ? SAFETY HAMMER, CABLE ? PREPARATION FOR REAR TRAILER HITCH FOR LD VEHICLES, 3.5 TONS ? TRAILER SOCKET, 13-PIN ? REVERSING CAMERA ? HEATED WINDSCREEN ? CRUISE CONTROL ? INFO + DVD + MP3. BLUETOOTH (DAB+) ? SWAN DRIVER'S SEAT INFOTAINMENT ? FRONT MICROPHONE INFOTAINMENT ? SCHOOL ZONE SIGN, LED, 25x25 + 40x40 ? HEATER. 1ST DOOR AREA, 8 kW ? 2 PIECES, ELECTRICALLY ADJUSTABLE SUN VISOR ? 3-POINT SAFETY BELT Lsdpeyw Eywofx Ahtjhk ? USB CHARGER (UNDER THE SEAT)

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, Available in Q3/2026; equipment can still be adapted to meet specific needs. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Equipped with the latest Horizon grinding software, tailored to the requirements of the tools and workpieces. For re-sharpening hammer jaws, involute gear cutters, helical bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, bevel gears, skiving tools, deep-hole drills, and other workpieces/components. Work area: X-axis 630 mm Y-axis 345 mm Z-axis 430 mm C-axis rotation angle 300° X3 auxiliary axis: Work area 400 mm Grinding spindle: Interface HSK80 (conversion to HSK50 possible) Power 100% 28.8 kW Speed Standard 12,000 rpm Measuring system and feed: Resolution linear axes 0.0001 mm Rapid traverse linear axes 30,000 mm/min Resolution rotary axes 0.001° Speed C-axis 150 rpm Rotary axis (A-axis SK50): Center height Standard 175 mm Speed as spindle 1,000 rpm Optional 2,600 rpm Control system: Siemens 840D SolutionLine Tool changer: Single-wheel, 6-8 positions Coolant system: Turbo Separator Lsdpeyzqwcefx Ahtehk Extraction system: LTA Fire extinguishing system: Kraft & Bauer Truing unit Tailstock optional Further accessories/workholding devices available from the extensive A.Haas workholding catalog. Individual, customer-specific training. Includes pre-acceptance at the manufacturer’s plant, IBN (Initial Batch Number), training, and final acceptance at the customer's site. Financing options available upon request.

Condition: used, Year of construction: 2020, operating hours: 3,600 h, – Monoblock boom, Lehnhoff quick coupler MS21 – Additional hydraulics for hammer/shear/grab – Includes 1 digging bucket Ljdezk Aimopfx Ahtehk – Good condition – Offered on behalf of a customer – Contact: Diego Negwer

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Support frame for mill and motor, complete with connection for aspirated discharge. Lhsdpoxrk Itefx Ahtsk

Condition: good (used), functionality: fully functional, machine/vehicle number: NR9VEGA26AR257231, empty load weight: 9,800 kg, maximum load weight: 28,200 kg, overall weight: 38,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/2025, next inspection (TÜV): 02/2027, loading space length: 13,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17.5, tire condition: 70 %, maximum speed: 90 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2024, Equipment: ABS, our vehicle number: #30806 VEGATRAILER 2D Jeep Carrier Car transporter for up to 6 vehicles A2 steering axle with friction joint Hammer Winch cable winch Lhodpfx Ajyw Ix Njhtek 2x drive-on ramps Air suspension ABS EBS BPW axles Drum brakes Twin tyres 245/70 R 17.5 3x storage/toolbox 2x central supports Water tank 2x LED reverse lights Leasing/financing available upon request!