Used Amada Hfp Nt 400-4L for sale (26,956)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT44003001078, empty load weight: 8,900 kg, maximum load weight: 31,100 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space width: 3,000 mm, total length: 11,940 mm, total width: 3,000 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Year of construction: 2026, Equipment: center pivot plate, Note: archive photos! #Low-loader trailer chassis - Welded steel construction - Turntable with heavy-duty ball-bearing slewing ring - Folding rear supports - 2 wheel chocks with holders - Aluminium side underrun protection - Rear mud flaps across full width (not in combination with forklift mounting) - Half-shell mudguards on axles 1 + 2 with anti-spray mud flaps behind each axle - Anti-spray mud flaps in front of and behind axles 3 and 4 - Excavator arm recess from the rear axles to the rear end, approx. 1800 mm long, approx. 650 mm wide, approx. 150 mm deep - 2 pairs of lashing holes, 5 t each, in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the beavertail - 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable - Storage box recessed into the gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm - Extendable widening to 3000 mm (not in beavertail) - (Track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2550 mm) - Storage compartment for timber planks beneath the low-loading deck - 70 mm timber planks for widening to 3000 mm #Lashing points low-loader - 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, 10 t each - 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) - 9 pairs of lashing mushrooms recessed on top and side of the outer frame, 10 t each - 3 additional pairs of folding lashing rings, 10 t each: 1 on the gooseneck, 1 at the start of the well deck recessed on the inside of the longitudinal beams, 1 behind the last axle recessed in the floor #Towing equipment turntable trailer - Drawbar with certified 50 mm towing eye - Spring-assisted drawbar height adjustment #Axles + suspension - Drum brake axles, manufacturer's choice - Laser-aligned axles/running gear: reduced tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear #Wheels and tyres - 235/75 R 17.5" - Twin steel rims, factory silver - TPMS tyre pressure monitoring system per ECE R 141, display in towing vehicle via EBS #Braking system - 2-line compressed-air braking system - Spring-brake parking brake - 2 coupling heads at the front, protected against mix-up - 12-24 V EBS, electronic braking system with EBS connector at the front - Axle load detection via EBS CAN bus signal, for display in the driver's cab #Electrics - 12-24 V, LED multi-chamber lights, yellow LED side lighting, LED number plate lighting - Yellow LED side lighting coupled with the indicators (flashing side marker lights) - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2 x 7-pin plugs at the front, protected against mix-up Nodpfx Aio Aavxdjrown - 1 LED rotating beacon with holder - 2 pairs of LED-illuminated warning boards, extendable to 3000 mm #Floor - Gooseneck at the front with steel/chequer plate covering, then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area - Beavertail with 70 mm softwood floor #Loading ramps - Steel ramps 3000 mm long, 750 mm wide, laterally adjustable - Additional ramp lock, folding at the bottom - Timber-covered - Hydraulically operated via the towing vehicle's PTO with throttle valve - Hydraulic connection with SVK plug NW 10/3

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Nwjdpfjmqty Ujx Airon

Condition: as good as new (ex-display), Year of construction: 2018, TS 3115 - gravity roller curve Year 2018 new, unused without posts Width: 450 mm Angle: 90° Inner radius: 800 mm Blue plastic rolls 19, 10 x 8 rolls + 9 x 9 rolls,. Rolls axle distance: 50 mm Division inside: 65 mm Division outside: 110 mm option 2 supports: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Nsdpok Aa D Nsfx Airjwn Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 4360-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4360 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Nwodpfxok Abd Ns Airjn We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Nwsdpfx Aiok Abd Tsron Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1996, Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Nodpek Abgcsfx Airjwn For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left GKF 90°-600-400-IR1000 - NEW RA2307 Nwedsuicgzspfx Airon Technical data: Frame width (NB): 600 mm Frame width with Bearing cover and motor: 850 mm belt width (GuB): 400 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 1000 mm Conveying angle: 90° degrees Conveying speed (v m/s): 1,0m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, functionality: fully functional, • WEMAS TURN 400-52 Nwodsz Ip Nfepfx Airsn • Year of manufacture: 2007 • Control system: FANUC 0i-TC • Programming system: Manual Guide • Max. turning diameter: Ø 484 mm • Max. turning length: 750 mm • Spindle bore: Ø 70 mm • Rapid traverse: 24 m/min • Tool turret: VDI 30 • Hydraulic chuck • Hydraulic quick-change turret Chip conveyor

Condition: used, all stainless steel belt width 400 mm mobile adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm Nwsdpfxe Aa Rkuj Airen With adjustable take-over outfeed conveyor

Condition: good (used), Manufacturer: unknown Diameter: 400 mm Mounting: KK 6 (116 mm) Fastening: 4 bolts, bolt circle 135 mm, spacing 95 mm Through-hole: 100 mm Height: 105 mm Accessories: Interchangeable jaws Nwsdpfo Acihqjx Airen Weight: 67 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Nodpfxsu E E Suo Airown Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: like new (used), Year of construction: 2022, operating hours: 8,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 570A2000-400/70 Nwsdpfx Aovftnaoirsn Baujahr: 2022 Schließkraft: 200 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht in PS: 141 g Schnecke DN 2: 25 mm Max. Hubvolumen: 44 cm³ Spritzteilgewicht in PS: 40 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: used, empty load weight: 8,373 kg, maximum load weight: 30,627 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 01/2020, loading space length: 13,310 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, loading space volume: 88 m³, total length: 13,310 mm, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: yellow, Year of construction: 2019, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, cooling unit, truck registration, d errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and easy financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting etc. * Professional loading / cargo securing * TÜV inspections, registration service Nodpfxj Aftz Te Airswn * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2019, machine/vehicle number: S4-3044, input voltage: 230 V, type of input current: AC, laser power: 120 W, type of cooling: air, total width: 1,428 mm, total height: 1,050 mm, total length: 952 mm, overall weight: 300 kg, laser wavelength: 10,600 nm, input frequency: 50 Hz, For sale is a used, professional Trotec Speedy 400 CO₂ laser engraving and cutting machine, manufactured in May 2019. The machine is in used condition, commensurate with its age and previous use. Technical data: Manufacturer: Trotec Laser GmbH, Austria Model: Speedy 400 Year of manufacture: May 2019 Serial number: S4-3044 Laser type: CO₂ laser Maximum laser power according to the nameplate: 120 W Working area, typical for the model: approx. 1,016 × 610 mm Power connection: 230 V / 50–60 Hz Rated power consumption: 1.9 kW Known operating condition: The machine could be switched on and operated via the integrated control panel. The following functions could be checked: The X and Y axes of the laser head can be moved via the control panel. The height-adjustable work table can be moved via the control panel. The axes and the table could be moved to various positions. The red pilot/positioning laser is visible. Nsdpfs Adrb Nox Airjwn The operating and control indicators are active. Important note regarding the laser: The actual condition of the CO₂ laser source is unknown. The operating hours and the remaining available laser power are unknown. A complete engraving or cutting test has not been performed. Scope of supply: The offer includes the Trotec Speedy 400 shown in the pictures, with the existing work table, laser head, and control panel. A separate extraction system, a control PC, and software licenses are not included in the offer.

Condition: used, Year of construction: 1999, Technical details: x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm control: Fanuc 18i M power capacity - milling spindle: 22 / 18,5 kW spindle turning speed - stepless: 12.000 1/min Nwjdpfo Adth Rox Airen numbers of tools in magazin: 60 BT 40 size of pallet: 2x 400 x 400 mm max. workpiece diameter on pallets: 580 mm workpiece height max.: 650 mm feeds x/y/z -stepless: 16.000 mm/min rapid travel x/y/z: 32.000 mm/min total power requirement: 54 kVA weight of the machine ca.: 8,7 t dimensions of the machine ca.: 2,9 x 3,9 x 2,6 m Accerories Chip conveyor Coolant through Spindle 50 bar Knoll VRF unit Horizontal twin - pallet machining center with full 4th axis, 60-tool magazine BT 40 and 50 bar coolant through spindle. *

Condition: used, Year of construction: 2022, Panel saw Manufacturer: SCM Type: NOVA 400 Year of manufacture: 2022 Technical data Length of sliding table: 3200 mm Nwedpo Adr Hlofx Airjn Maximum saw blade diameter: 400 mm Power supply: 400 V Machine weight: approx. 718 kg Equipment Sliding table made of aluminum Machine start buttons on the sliding table Parallel fence with digital position display Scoring device for clean cuts in composite panels Cross-cutting fence with stops for repeatable cuts Rip fence with position lock Upper saw blade guard on an independent support arm Extension table for large panels Adjustable saw blade height and tilt angle Control panel with emergency stop button Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Nwsdpfx Ajtz S H Nsirsn Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Technical parameters Engine power 3.0 kW / 4 HP Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak

Condition: excellent (used), Electric CNC plate shear, Schechtl, in top condition – ready for immediate use – retains its value. For sale: a fully automatic Schechtl plate shear with CNC depth gauge, in very good technical and visual condition. 4m x 2.5mm. The matching press brake is also available. Includes loading. Sale: • Machine price, net • You will receive a proper invoice with VAT shown. • Shipping or forwarding possible (upon request) • Inspection possible by appointment Please note: If interested, please contact us by phone. Njdpj Adzbxsfx Airjwn Phone: You can also find other sheet metal working machines in my other listings.

Condition: excellent (used), Catalog number: 8089 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 170mm - Shaft width: 430mm - Number of knives on the shaft: 4 pcs - Feed rollers, toothed, top and bottom: 2 x 1.73kW - Screen: 25x25mm - Automatic reversing with adjustable settings - Vibrating conveyor: 1.5kW - Length of vibrating conveyor: 3250mm Nwodpfxsz Eaypo Airen - Width of vibrating conveyor: 380mm - Main motor: 45kW - Overall dimensions of vibrating conveyor: 3250x750x1100mm - Overall dimensions of shredder (length/width/height): 2400x1400x1400mm - Total weight: approximately 3000kg ADVANTAGES – Vibrating feeding table – Automatic reversing with adjustable settings – Shaft with 4 knives – Produced by the Polish brand OSKA – DTR + CE documentation – Unpainted – Used shredder, very good condition Net price: 96900 PLN Net price: 22535 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: new, functionality: fully functional, input voltage: 400 V, welding current (min.): 40 A, welding current (max.): 400 A, input frequency: 50 Hz, iMIG POWER 400 – Welding power source, new unit from stock, original packaging Suitable for: • MIG/MAG welding • Electrode welding (MMA) • TIG welding The power source is suitable for both professional manual operation and as a component of automated welding systems. Technical data: • Welding current: 40–400 A • Mains connection: 3 × 400 V ±10 %, 50/60 Hz • Full load current: 25 A • Max. power consumption: 17 kVA • Mains fuse: 32 A slow-blow • Working voltage: 16–34 V • Cooling type: F • Dimensions (L × W × H): 720 × 550 × 830 mm • Weight: approx. 48 kg including trolley * Manufacturer: ABICOR BINZEL, Germany * Several units available Nwsdj Afd Hgspfx Airjn Wire feed unit, cooling unit, and other options are also available upon request. Please feel free to inquire. Delivery/shipping possible at additional cost. Image shows a similar product image including optional accessories (here: wire feed unit).

Condition: excellent (used), Hilge MAXA 200-400-CN Centrifugal pump Nsdpfx Aj Ad Rifeirown Single stage end suction centrifugal pump, mounted on skid with Siemens 18.5Kw motor, flow rate 400M3/h

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, – Saw blade 400 mm – Double mitre Nwsdpfegg N Drsx Airon – 2 pneumatic clamps – Misting lubrication system – Blow gun – Protective cover – Documentation – 400V

Condition: used, Year of construction: 2014, machine/vehicle number: FA60, Used ZELGA Shrink wrapper RZE 400 - 2014Technical Specifications & Performance DataThis automatic Shrink Wrapper from ZEGLA is designed for reliable secondary packaging of beverage containers, specifically aluminum cans. The model RZE 400 provides consistent bundle formation with neutral film, ensuring robust presentation and pallet stability for distribution. Built with industrial-grade components and a proven control platform, it is suitable for integration in a used bottling line or as a second hand upgrade to existing beverage production.Manufacturer: ZEGLAModel: RZE 400Year: 2014Machine category: Shrink WrapperContainer compatibility: Aluminum cansOperating type: AutomaticPLC/Control: Allen BradleyFilm type: Neutral filmElectrical supply: 440 V, 60 HzWeight: 1700 kgAdvanced Automation & Control SystemsThe machine is equipped with an Allen Bradley control architecture for dependable automation and straightforward diagnostics. Operators benefit from stable process control, precise temperature management within the shrink tunnel, and consistent infeed/outfeed synchronization for smooth bundle handling. The automatic operating mode reduces manual intervention while supporting repeatable format settings and efficient changeovers.Allen Bradley PLC for reliable control and integrationAutomatic sequence management for infeed, wrapping, and shrink tunnelStable temperature regulation for consistent film shrinkageOperator-friendly controls for setup and routine adjustmentsProduction Line Integration CapabilitiesEngineered for seamless inclusion within industrial packaging and beverage production environments, the ZEGLA RZE 400 can be positioned downstream of can filling and labeling equipment and upstream of palletizing systems. It supports integration with standard conveyor systems and typical accumulation solutions used in modern bottling equipment and packaging machinery.Compatible with upstream can filling and labeling processesDownstream-ready for case handling or palletizingSuitable for standalone use or full production line integrationDesigned for shrink-wrapping bundles with neutral filmMachine Condition & Maintenance HistoryThe unit is currently in storage and has seen less than one year of active operation. Its limited runtime and storage status make it a compelling option for producers seeking a second hand shrink wrapper with low wear. The overall presentation indicates careful handling and readiness for recommissioning in a used bottling line or packaging machinery layout.Operational status: In storageUsage: Less than 1 year in productionOperational Performance & VersatilityPurpose-built for can multipacks, the RZE 400 focuses on stable pack formation and consistent shrink quality with neutral film. This configuration supports beverage producers aiming to improve secondary packaging presentation... Nwjds Adyvhopfx Airjn

Condition: used, Henkel   UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use.   The device integrates the following: a control unit with an integrated mains switch and operating hour counter a lamp housing with the burner reflector igniter. With UV protection box.   Features:   Contains a 400 W metal halide lamp Optimized for light output in the UVA range Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be disconnected from the lamp module and operated separately Adjustable lamp height for optimal irradiation With glass filter to prevent short-wave UVB/UVC emission   Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time for the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300 mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone. Nodozg Expjpfx Airewn

Condition: defective spare-parts repository (used), Universal Machining Center - Parts Donor Manufacturer: MIKRON Nedpfx Aioyzt A Uerjwn Model: HSM 400 U The machine is defective and is being sold as a source of spare parts. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.