Used Amcko Vibro Sieve for sale (422)

Condition: used, operating hours: 7,098 h, functionality: fully functional, power: 38 kW (51.67 HP), first registration: 07/2018, fuel type: diesel, color: white, fuel: diesel, driver cabin: day cab, gearing type: automatic, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, New version, 38 km/h, 2-speed gearbox City Ranger 3500, 38 kW 4-cylinder Perkins 404D-22 38 kW (51 hp) at 3,000 rpm (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65-liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for use on sidewalks! Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system Air-sprung Grammer comfort driver's seat 2 x work spotlights in the front Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-release plate Mechanical implement relief Quick-Shift quick-change system for attachments for summer and winter services Preparation for hydraulics and electrical system for optional equipment High-pressure valves (360 bar) – only on BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Integrated reversing camera incl. 7" color screen - Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with the reversing camera) Container with cleaning flaps & water level indicator Deflector plate Rear underrun protection Sweeper unit with 2 towed front brushes, 900 mm Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed control 0-150 rpm Dust reduction through spray nozzles for each disc brush Automatic start-up protection (For sweeping and collecting) With hydraulic adjustment of the right brush Sweeper material container with suction fan Color: container in stainless steel look, panel in white RAL 9003 High-dumping height 1600 mm 250-liter fresh water tank 300 liters recycled water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick-change (For sweeping and collecting) Dirt container deflector plate Jump starter cable / auxiliary start device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance PRICE SURCHARGE: Handheld suction hose 4m € 1,300 Ncsdjzd Anispfx Alhju plus VAT Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, operating hours: 3,029 h, power: 38 kW (51.67 HP), first registration: 03/2016, color: white, fuel: diesel, emission class: euro5, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, NILFISK CITY RANGER 3500 utility vehicle New version, 38 km/h, 2-speed transmission for improved driving performance City Ranger 3500, 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3,000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65 liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for sidewalks! Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system 2 x work lights at the front Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-change plate Mechanical lifting mechanism relief Quick-Shift quick-change system for attachments for summer and winter service Preparation for hydraulics and electrical system for optional equipment options High-pressure valves (360 bar) – only with BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle Ncedpfx Aljzd Alzsheu With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Integrated rear view camera including 7” color screen -Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with rear view camera) Container with cleaning flaps & water level indicator Deflector plate Rear underrun protection Sweeper unit with 2 towed front brushes, 900 mm Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed adjustment 0-150 rpm Dust reduction by spray nozzles per disc brush Automatic start-up protection (For sweeping and picking up) With hydraulic tilting adjustment of the right brush Sweeper container with suction blower Color: container in stainless steel look High-dumping height 1,600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick change (For sweeping and picking up) Dirt container deflector plate Jump start pole / external starting device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance Handheld vacuum hose € 1,300,- plus VAT Subject to change, printing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, Assonic Ultrasonic Compact Sieving Machine CSM-500 SPC – Inertizable - Ultrasonic sieving combined with low-frequency excitation - Control panel for manual operation or integration into process workflows - Inlets and outlets: ISO-KF40 - Prepared for inertization (sieving with < 2% residual oxygen possible) - Incl. dosing unit and bottle holder - Gas connection with quick connector Specifications (excerpt from Assonic website) - Approx. 400 kg/h 316L at 63 μm - Approx. 100 kg/h AlSi10Mg at 63 μm - ATEX certification possible - Small footprint - Standalone machine - Low CO² footprint Accessories: - Laminate sieve 43 µm (new) - Laminate sieve 20 µm (new) - Laminate sieve 63 µm (used, for aluminum materials) Condition: - Very good condition, normal signs of use Nodpfxsywhvno Alhecu - Ready for operation - Scope of delivery: as described - Price: plus shipping costs - Sale exclusively to businesses - Sale without any warranty - No guarantee, no returns - Sold as inspected or as described - Liability for consequential damages excluded - Errors and prior sale reserved - All information subject to change

Year of construction: 2024, operating hours: 500 h, condition: excellent (used), functionality: fully functional, Here, an entire system is being sold. 1. 3D metal printer Trueprint 1000 G06, manufactured in 2024, 500 laser hours Njdpfxozdq Rfj Alhecu 2. Ultrasonic sieving station from Assonic 1000, 1 year old 3. Ruwac wet separator NA7-11, 1 year old 4. F 90 material storage cabinet, 1 year old 5. Used Köttermann compressed gas cylinder cabinet, the installation within the cabinet is 1 year old 6. Exhaust system for the room and for the compressed gas cylinder cabinet. The supply air of the exhaust system is equipped with a heating element and can blow in pre-heated air (for winter). All systems are fully functional and can be verified by a test run. The removal and transportation of the systems are the responsibility of the buyer.

Condition: new, Year of construction: 2025, pressing force: 1,200 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, flow forming, shaping, and heavy-duty pressing operations. Thanks to its eight-slide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved via vibration, ensuring that loads generated during pressing are distributed evenly to maintain parallelism and squareness tolerances. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-relieved stress body structure Njdpfx Alsx N T Ruehocu - Bronze Zr14 slide bearings - WPQR and WPS welding applications certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-slide H-frame press design Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1200 tons Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibro-stress-relieved Welding Application: WPQR and WPS applications certified by TÜRK-AK in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cc – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6100 mm Approx. Press Width: 3550 mm Approx. Press Depth: 2400 mm Lower Table Height From Ground: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Ncjdsynzg Hjpfx Alhsu Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 957 h, type of input current: three-phase, overall weight: 600 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 30 W, feed length X-axis: 200 mm, feed length Y-axis: 250 mm, feed length Z-axis: 330 mm, travel speed (max.): 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. Peripheral Equipment & Accessories For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine Details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: complete, all original EOS components _____ Technical Specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm Ncedpfsy El Anox Alhju • Build speed: up to 20 mm/h (z-axis, depending on material) • Materials: PA12, PA11, TPU, and other SLS-compatible plastics • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / material management system • Machine weight: approx. 600 kg _____ Scope of delivery (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for cost-efficient operation) • Leering sandblasting cabin type DI-12 (for professional post-processing of components) • Ruwac industrial vacuum cleaner, type WS 200H, Zone 22 ATEX-certified (for safe handling of plastic powders) • 4x material containers • 2x build containers _____ Special Highlights: • Very low operating hours (only 957 h) → like new condition • Complete, immediately ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications • All accessories are original EOS parts → perfectly matched system _____ Application Areas: • Prototyping • Small batch production • Spare parts & customized components If you have any questions or require further information, please feel free to send us a message or give us a call. A viewing is also possible by appointment.

Condition: used, Year of construction: 2004, Screen changer EREMA SW8/134 RTF Continuous partial area backwash filter with 4 carrier pistons (8 sieves) for heavily contaminated polymers Minimal pressure differences when backwashing or changing sieves The melt filter system meets the highest demands for fine filtration and is characterized by robustness, a high degree of automation and maximum availability, plus improved homogenization of the melt Main components: 1x continuous 4-piston backwash filter Njdpoualalefx Alhecu 1x control monitoring unit 1x operating unit for filter change 1x hydraulic unit System features: - Sieve diameter Ø 134mm - Active sieve area 1128cm² - fully automatic rinsing processes without interrupting production - Technical documents - Year of manufacture 2004 Subject to prior sale Please only send inquiries by email Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize the shipping. This is not part of the offer price.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 8,685 mm, total width: 2,550 mm, total height: 3,970 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center axle trailer Fine-grained steel welded construction Outer frame slightly angled with "Load-Lock profile" for attaching tie-down straps. Note: To attach the straps, the side panels must be opened! "Vario-Lash" lashing rings for use in the "Load-Lock profile", 2.5 tons each, loose Gear-supported front legs, with a straight lower part and single-sided operation on the right Telescopic rear support Retractable ladder at the rear Door latch on the side Chocks with holder Aluminum side impact protection Steel underrun protection Ncjdpfxozcqh Nj Alheu Quarter panel fenders in front of and behind each axle Rear impact protection Plastic toolbox with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Coupling device for center axle trailer, according to customer requirements Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle EBS, electronic braking system with EBS plug at the front, with connection cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle – driving stability system Wheels and tires 385/65 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length approx. 6,900 mm Front bulkhead / corner posts at the front 2,580 mm high, steel corner posts in a full-volume design, release mechanism for side tarpaulin on the front bulkhead Center posts Sliding posts, can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom Insertion slats Rows of aluminum V-insertion slats Rear bulkhead / corner posts at the rear Rear corner posts, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioner Rear portal doors, 2-wing, each with 2 internal rotating bar locks Tarpaulin Tarpaulin with welded horizontal and vertical straps Tensioners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Fixed roof with tarpaulin and bows, tarpaulin color: white Optimal rain gutter at the rear, at the top of the end bow, above the doors Registration country / signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Load securing certificate according to EN 12642 XL 24/7 service hotline prepared for license plate holder, single row Reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the corners (if visible side panels, then the strip at the bottom, on the side panels) Reflective strips: red, around the rear portal *also available as a drive-through version Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Type: TPS 118 Logistics Semi-Trailer Chassis: Central Axle Trailer Outer frame slightly inclined, new design with "Load-Lock profile" for securing tie-down straps 2-speed gear support leg at the front Plastic toolbox Platform height: 1080 mm Coupling: Central axle trailer Drawbar with tested 40 mm drawbar eye, logistics version Drawbar mechanically adjustable in height via threaded spindle, below floor level, max. adjustment range 200 mm Drawbar mechanically adjustable in length from approx. 1950 - 2300 mm, can be mechanically locked at approx. 50 mm intervals, drawbar length set to approx. 2100 mm Axles & Suspension SAF/BPW axles, selectable by the manufacturer "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking System 2-line pneumatic braking system Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle 24 Volt EBS, electronic braking system with EBS plug at the front, with connection cable with raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 4x 235/75 R17.5, brand selectable by the manufacturer Nodpfxszcp E Tj Alhocu 4x steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length: approx. 7,300 mm Superstructure Front wall / corner posts at the front Through-loading system with front portal doors, 2-leaf, each with 2 internal rotary bolt locks, corner posts made of steel, release mechanism for side tarpaulin Ramp, approx. 2,400 mm wide, 1 x divided, approx. 350 mm long for resting on the tailgate, load capacity approx. 1,800 kg, incl. support for the tailgate (drawbar length then approx. 2100 mm, for tailgate length of 1800 mm, the coupling offset from the truck must be at least 20 to max. 240 mm). Note! Usable internal length is reduced by the ramp! Side Walls Center Rails 2 pairs of sliding rails that can be moved along the entire length, with 4 pockets and a long pocket at the bottom Insert strips 5 rows of wooden insert strips (in combination with side walls, 4 rows) Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel, extending to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf, each with 2 internal rotary bolt locks Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning fasteners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Sliding tarpaulin, rear end lift that can be folded up, with the tarpaulin sliding from back to front, tarpaulin color: white Optimal rain gutter at the rear, above at the end beam, above the doors Country of Registration / License Plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Fliegl manufacturer certificate for the structural strength of the superstructure according to EN 12642 XL prepared for single-line license plate holder Reflective strips: white, continuous on the bottom of the side tarpaulin and at the top in the corners Reflective strip

Condition: not inspected (used), Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Year 2011 0 Range+Heine coating system for coating individual wooden window components and frames for sale on behalf of a client ----- Manufacturer’s technical description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Intended use of material from the relevant coating manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift (without forced drying) Process (1 cycle is run twice): - Flooding - Drying - Checking and applying joint sealant - Spraying - Drying ----- ----- Item 1 Conveyor technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially comprising: 3 drives with gear motors for the main chains with frequency-controlled speed (see layout). Various running rails, horizontal curves, chains Tensioning stations, pneumatically/electrically controlled stop stations 50 crossbeams, 5,000 mm long (max. weight 250 kg) Automatic tilting of the crossbeams in the drip-off area after the flooding system 1 conveyor system control (Siemens S7-300 PLC) Programmable buffer stocks Infinitely variable drives. 1 lifting/lowering station for loading and unloading workpieces (max. stroke 2,000 mm) 1 set of steel structure for mounting the conveyor system ----- Item 2: Flood Coating System 1 flowcomat II-P 1 system for colourless primer Maximum workpiece width approx.: 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flood lances, each fitted with a maximum of 3 nozzles. 1 set of accessories for cleaning the system 1 stainless steel sieve fitted externally 1 paint supply 1 control unit ----- Item 3 Additions to the dip coating system 1 Drip channel and drip tray in the evaporation area behind the dip coating system After dip coating, the crossbars run into a drip buffer. The dripping coating material is returned to the dip coating system via the non-stick PP drip tray (and drip channel). Rinse water is collected in the flood coating system and pumped out. The use of PP for the areas in contact with the coating ensures easy cleaning of dried-on coatings. 1 Humidification system 1 Control unit for the humidification unit Complete with controller for the humidification volume 1 Hygrostat for measuring room humidity and activating the humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation system 1 R+H waco 200 coagulation system – 200 l collection tank ----- Item 4: Topcoat spray booths 2 paint booths for topcoating 2 extraction walls with sandwich panel cladding to suit the Ncedpsy Ty E Hjfx Alheu work area. Fan: 16,000 m³/h Filter area: - 3 sets of Ecola pre-separators - 1 set of Paintstop filters - 1 set of bag filters Recirculating air distribution ceiling in a tensioned frame design Volume 12,000 m³/h approx. 75% recirculation – 25% exhaust air operation (the exhaust air volume is extracted from the hall) installed on site-provided foundations in accordance with the layout 2 Prolac overspray recovery columns ----- ----- Item 5 Addition to the topcoat spray booths 3 humidification nozzles fo...

Condition: used, machine/vehicle number: WFDFLT33902030001, empty load weight: 6,075 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, total length: 13,850 mm, total width: 2,550 mm, total height: 3,940 mm, suspension: air, tire size: 435/50 R19,5", Please note: The images shown are archive images. The vehicle may still be in use. "Preload" – slight preload in the neck area, drawbar coupling with a replaceable 2" kingpin, outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps, 24 tons, 2-speed landing gear, single-sided operation. Door lock on the side, support wedges with holder, aluminum side impact protection, galvanized steel under-ride protection, quarter-panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, pallet stops on both sides, approx. 15-20 mm high, in bolted design, loading height reduced by approx. 15-20 mm, plastic tool box with drawer and insert, b=650 / h=520 / d=670 mm. Axles + Suspension SAF disc brake axles, "axle/chassis laser-measured" – reduces tire wear and fuel consumption, air suspension, 1st axle is an automatic lift axle, including forced lowering and start-up assistance, axle lift below the recommended driving height. Braking system 2-line compressed air braking system, spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: with lift and lower valve, ride height in connection with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm. Wheels and Tires 435/50 R19.5", steel rims. Electrical System 24 Volt, multi-chamber lights, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connection cable. Floor Sieve-printed panels, approx. 30 mm thick, on longitudinal supports for high point loads, for forklift axle load up to a maximum of 7100 kg. Front Wall / Front Corner Posts 2580 mm high, corner posts made of steel in a box-section design, release mechanism for side tarpaulin on the front wall. Intermediate Posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom. 3 pairs of post positions Insertion strips 5 rows of aluminum insertion strips + Vario strips. Rear Wall / Rear Corner Posts Ncodpfx Alezcmmzohsu Rear corner posts made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Tarpaulin Tarpaulin with welded-in horizontal and vertical straps, tensioning closures made of stainless steel. Roof Fliegl-Blitz sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2490 mm, tarpaulin color: white (in connection with the sliding tarpaulin, without running carriage at the front). Country of Approval / Plates Germany, type approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for body strength according to EN 12642 XL, Fliegl manufacturer's certificate for body strength according to DL 9.5, pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm, Fliegl manufacturer's certificate for load securing according to VDI 2700 Sheet 12 ff., pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm, prepared for license plate holder, single row, warning sign according to ECE - 70, reflective strips: white, continuously on the lower part of the

Condition: used, Year of construction: 2021, Sinterit Multi PHS + Sandblaster – Accessories as Shown in the Photos, No Vacuum Cleaner, 2021 The Sinterit Multi PHS (Powder Handling Station) with Sandblaster is a professional post-processing solution designed for SLS 3D printing applications. It supports an efficient workflow for powder removal, material handling, and part cleaning, helping improve cleanliness and convenience during post-processing. This offer includes the Sinterit Multi PHS, Sandblaster, and accessories as shown in the photos. Njdpeywurvsfx Alhecu Please note that the vacuum cleaner is not included. Production year: 2021. Key features: Professional powder handling and post-processing station for SLS printing Supports powder cleaning, sieving, and part finishing processes Includes Sandblaster for surface cleaning and finishing Accessories included as shown in the photos Industrial-grade design suitable for professional use Included in the offer: Sinterit Multi PHS Sandblaster Accessories as shown in the photos Vacuum cleaner not included

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights Nedpjdzqn Djfx Alhscu - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Year of construction: 2017, condition: reconditioned (used), Hello, we are offering two refurbished IBS washing machines, type MAXI 78 and MAXI 91-2. In addition, the pumps have been resealed on these machines. Inspection and collection in Einbeck. The soiled items to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the machine is switched on, and the washing solution in the tank is heated. In the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the washing tank and pump it through 6 stainless steel nozzle pipes with overlapping flat spray nozzles. The items to be cleaned are blasted from all sides with the hot solution during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the machine switches off automatically. Advantages: 2 pumps arranged horizontally 6 three-dimensional nozzle pipes made of stainless steel robust stainless steel design additional small parts cleaning basket made of stainless steel (diameter 170 mm) rotating washing basket made of stainless steel, V-belt drive via separate motor fume extraction stainless steel sieve plate with filter basket above the washing tank Nsdpfx Aszcuxxjlhecu low water level protection adjustable feet

Condition: like new (used), Year of construction: 2009, functionality: fully functional, temperature: 60 °C, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Nsdpsx Izwmefx Alhjcu Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. Nodpezb Iu Defx Alhocu With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Ncjdpfx Aozb Ikfelhou Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: good (used), Year of construction: 2010, • Brand: Erdwich • Type: M700/1-900 • Year of construction: 2010 • Machinenumber: 2036 Ncsdpovmzkxjfx Alhsu • Engine power: 22,0 kW • Single axle • Hydraulic slide The shredder has been completely serviced at our workshop and fitted with a new sieve bedholder. We currently have 2 sizes of sieves in stock. These sieves are suitable for reducing paper to 20 or 25 mm.

Condition: used, Sieving bucket / bucket / OQ65 / 1,170 mm For inquiries regarding attachments, Mr. Herden is available to assist you (please call ). Sieving bucket / bucket / OQ65 / 1,170 mm / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross - Cutting width (mm): 1,170 - Weight (kg): 830 Equipment: - Incl. OQ65 mount In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. Nodpfxszckpyj Alhjcu We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! Internal ID: 1U330 = Further information = Intended use: Construction Unladen weight: 830 kg Please contact Marius Herden for further information.

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. Ncodpegmh H Tsfx Alheu This machine is ideal for shredding bulky, lightweight aluminum chips or turning chips. Not suitable for heavier aluminum parts. Included: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 40x40mm, multi-rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting mechanism opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen size selectable (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,990 net - Inclined conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Nodpfx Aloh S H T Ushocu Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood Nodpfxod N Dn Do Alhocu - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear Ncodpfx Alsdv Eu Hohju

Year of construction: 2024, condition: new, Overview - of the different variants *Not every item is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge system (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction screw - length approx. 4 m 4 sieves are mounted on the underside, which are used for suction. Individual price net from: €9,750 - Suction parts / hoses, lump sum €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator suction unit MMJET 160, with cleaning Connection 160, Fan 2.2 kW Air flow 1850 m³ / 400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with approx. 20 kg from €59,995 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Capacity: approx. 30 bales per hour Hopper capacity approx. 0.7 m³ Level sensors for min./max. level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Ncedpfxeff Sbie Alheu Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek bale presses / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The bale press compresses the material fed into the hopper without the addition of binders by means of hydraulic pressure and packages the material in plastic bags. The volume of the material can be significantly reduced with the bale press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry weight. The hopper of the mütek bale press can be filled automatically or manually and has a volume of approx. 0.7 m³. Hoppers with larger volumes or with an integrated suction and filter system as a complete disposal unit are also available. In addition to automatic filling via a dust extraction system, mütek also offers filling by means of screw conveyors. In both variants, automatic dust extraction is possible. mütek bale presses are equipped with a control cabinet. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - simple and safe storage - no loose dust - Minimization of the storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry weight) - maximum 35 mm long