UNTHA RS30 SB-460

UNTHA RS30 SB-460

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Cutter shaft torque approx. 17,000 Nm Filling hopper 1,200 mm x 2,400 mm Drive power 2 x 11 kW Hjdpfxotzbvys Adwjng Total drive power 22 kW Weight 2,600 kg

Condition: used, functionality: fully functional, load capacity: 18,000 kg, lifting height: 11,900 mm, fuel type: electric, mast type: telescopic, construction height: 1,990 mm, empty load weight: 21,650 kg, total length: 5,540 mm, drive type: Elektro, construction width: 2,000 mm, Pick & Carry Crane Hjdpjt Dd Uwefx Adwsng Mast type: Telescopic Technical condition: good Front tires type: Non Marking Rear tires Type: Non Marking Remote control

Year of construction: 2024, condition: new, functionality: fully functional, The copper wire granulator can recycle waste copper wire into separated copper and plastic, the process capacity is 100-180 kg/h, the dry physical crushing method does not produce pollution. The granulator is sold with a pre-shredder and a conveyor belt with magnet! Design and manufacture 99.99% excellent efficiency and reliability, advanced technology: ● Airflow gravity sorting system to discharge the copper particles from the insulation. ● Strong vibration separator to separate the weight of the copper granules from the insulation ● Self-cleaning dust collection system to reduce maintenance time and remove dust. ● The machine is compact and takes up little space ● 99.99 % copper purity recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical specifications Model GRS 180KG Current voltage 380V Power output 8,7 kW Frequency 50 Hz Hjdpfju Tq S Hex Adweng Processing capacity 100-180 kg/h Size of machine 80*137*204CM Net weight 518 kg

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last service by Homag in 11/2024) Features and technical data: - Workpiece thickness min.: 12 mm - Workpiece thickness max.: 60 mm - Workpiece min. (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) - Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) - Feed speed: steplessly adjustable 18–25 m/min (frequency-controlled) - Gluing system: EVA hot-melt adhesive - Glue application (tank / cartridge / nozzle): Melting unit with granulate hopper - Glue volume / cartridge size: Granulate hopper, melting capacity 18–35 kg/h, level-controlled - Heating time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure section: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: FK13 profile milling unit, automatic 8-position tool changer (R = 2 mm) - Bevel / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in FA11 finishing unit - Jointing unit: KAL310/A20/S2 jointing milling unit, 2 × 3 kW - Workpiece pre-heating: available - Release agent spray device: top / bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control system: power control PC22 (industrial PC, woodCommander running Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant per EU directive 98/37/EC Hnsdpfowx Aaqjx Adwsg Dimensions / required floor space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg Please note: The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Year of construction: 2025, condition: new, The LITech hammer mills HM 120/200/300/400 are ideal for the pre-shredding of medium-hard, hard-tough & brittle materials such as floors, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and much more many more!! Hnjdpfsg Ay Dhox Adweg

Condition: reconditioned (used), functionality: fully functional, Rotary shear, twin-shaft shredder, Drive power: 110 kW (2 x 55 kW), Rated current: 210 amps Blade width: 75 mm Cutting unit size: length 1600 mm x width 980 mm Quick-change blade system, SEW gearbox, Including hydraulic pusher, hydraulic rated power: 7.5 kW, Control cabinet, Cutting unit overhauled, Dimensions: Hodpfjwva Hiex Adwsng Length approx. 6150 mm x width approx. 3100 mm x height approx. 3150 mm, Total weight: approx. 17 t

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg Hnsdpfxjbq Stqj Adwog

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 22.198, input frequency: 50 Hz, Showroom model Fully CNC-controlled edge bander, very comprehensively equipped: Pre-milling unit Gluing unit Front and rear cut-off saw unit Fine milling unit (top and bottom) Corner rounding unit (front and rear) Radius scraper unit Additional options available: Infeed roller for 2 types of edge bands, including solid up to 5 mm. R-8 N glue scraper unit. PC 19” touch screen (new). CNC-controlled infeed guide. Pre-milling unit with 65 mm high diamond tools. Hnjdpew Ufuhsfx Adwjg Pneumatic on/off. Infrared lamp at infeed. Universal feed rule. Antistatic at infeed (type Riepe) Anti-adhesive unit after the milling unit (type Riepe) Cleaning unit at outfeed (type Riepe) LED in the cabin. WiFi Kit unit. LED motion system. Duo Melt EVA/PUR glue unit. Nesting for panels with hinge holes. Automatic chain lubrication.

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA Hjdpfjignt Uox Adwsng - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Hodpfx Adexzfqbowjng Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)