Used Amtec Hpfs Mini 25-L for sale (72,912)

Condition: used, Gearbox, spur gear, angle gear, worm gear Cgedpet Iyvfefx Aa Not -Manufacturer: Comer, gearbox type L-25-A -Translation: i = 1:1 -Shafts: Ø 25 x 60 mm / Ø 25 x 55 mm -Dimensions: 240/205/H95mm -Weight: 4.3 kg

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min Cedpfx Aoxaa Thoa Nsgt table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: ready for operation (used), MMK ZKV170/55-25-08 drawbar L = 1070 mm, flange diameter: 155 or 205 mm, tube diameter: 62 mm, tube length: 595 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Codpfx Aaji Eb Rfs Nogt

Condition: ready for operation (used), Brinkmann TC 25 / 810 + 001 submersible pump 10 L / min No. - 002, used, slight signs of wear, 100% functional, scope of delivery as per photos Cedpfx Aaji D Hmdj Nogt

Condition: used, empty load weight: 8,639 kg, maximum load weight: 27,361 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2015, loading space length: 13,315 mm, loading space width: 2,490 mm, loading space height: 2,500 mm, suspension: air, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, body: insulated 3-axle refrigerated semi-trailer with double-deck system, load securing, swing doors, & Carrier Vector 1550 R2 cooling unit (electric/diesel), 3x 9t SCB axles, disc brakes, 1st axle liftable. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Cgodpfxsw T Uzzo Aa Nst

Condition: used, empty load weight: 8,891 kg, maximum load weight: 27,109 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2013, loading space length: 13,320 mm, loading space width: 2,490 mm, loading space height: 2,690 mm, suspension: air, tire size: 385/65R22.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, 3-axle, SCB axles (disc braked), air suspension, 1st axle liftable, lifting+lowering, ABS (anti-lock braking system), portal doors, pallet box, fire extinguisher box, supports, EBS ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Cgsdet Aa I Rjpfx Aa Njt

Condition: used, empty load weight: 8,409 kg, maximum load weight: 27,591 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2015, suspension: air, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, Body: insulated 3-axle refrigerated semi-trailer approx. 92m³ with double-deck system, load securing, swing doors & Carrier Vector 1550 R2 cooling unit (electric/diesel). ARCHIVE PHOTOS! 3x 9t SCB axles, disc brakes, first axle liftable. Loading height approx. 1050mm! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Cgsdpow Tkzqsfx Aa Not

Condition: used, empty load weight: 9,180 kg, maximum load weight: 26,820 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2012, suspension: air, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, tail-lift, Vehicle location: Bovenden, Cjdpfx Aajw T Uzuj Nsgt Body: insulated 3-axle refrigerated semi-trailer with double-deck system, load securing, swing doors & Carrier Vector 1550 R2 refrigeration unit (electric/diesel) 3x 9t SCB axles, disc brakes, 1st axle liftable. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, intermediate sale, and errors excepted!

Condition: used, empty load weight: 8,426 kg, maximum load weight: 27,574 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2015, suspension: air, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, Cgsdpfx Aaeu Tfv Ho Not ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Cedouhv R Dopfx Aa Nogt Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Codpfsx N Ibhjx Aa Njgt Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: used, mileage: 2,31,950 km, power: 330 kW (448.67 HP), first registration: 05/2021, fuel type: diesel, maximum load weight: 16,307 kg, overall weight: 26,000 kg, tire size: 315/70 R 22.5, axle configuration: 6x2, color: white, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: air conditioning, cruise control, electronic stability program (ESP), navigation system, traction control, Standard towbar, D40, Ringfeder - Wheelbase 4600mm – Left tank, 650x700x1600mm alum. - AdBlue tank 60 l left side - Third axle 7.5 t liftable - 12-speed gearbox G 211-12/14.93-1.0 - Mercedes PowerShift 3 automated gearbox - Gearbox with integrated GPS for reduced consumption (PPC) - Engine version Euro VI, D - High-performance engine brake - Engine OM 471, R6, 12809 ccm, 330 kW, 2200 Nm - Engine OM471 - External sun visor, transparent - Electric auxiliary air conditioning - L-cab - Automatic climate control - Wind deflector, without base plate, adjustable - Cab width 2.50 m - Provision for upper bed, - Lower luxury bed - Hot water cab heater - Functional passenger seat - Pneumatic driver's seat, comfort - Use of residual heat - Rear-view mirror with camera - Stream Space Flat 2.5 m - Aerial roof - Electric pop-up roof - Active Brake Assist 5 - Driver's airbag - Secondary Aquatarder - Attention Assist - Trailer brake with 2 connected lines on the left - Anti-roll control - Electronic Stability Program (ESP) - Lane Keeping Assist - Cornering Assist - Cruise Control - Adaptive Cruise Control + Stop and Go - Traffic Sign Assist - Radio/navigation/electronics - Anti-roll control - Towbar - Refrigerator in the cabin - 80% tyres Cgjdpovuccxefx Aa Net

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,033 h, load capacity: 1,200 kg, lifting height: 4,350 mm, free lift: 1,462 mm, fuel type: electric, mast type: triplex, construction height: 1,940 mm, fork length: 1,150 mm, drive type: Elektro, High-lift truck Load center: 600 Mast type: Triplex Condition: Refurbished without warranty Cgodpfx Asycy N Aja Not Technical condition: Good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 200Ah Battery manufacturer: Batronics Battery type: PzS Battery year: 2025 Battery condition: 80 - 100% Description: Delivery with new FEM 4.004 inspection, overhauled and newly painted. For further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We will gladly provide attractive offers for leasing & financing as well as affordable delivery options. We also accept Linde equipment as trade-in – even if you do not purchase a machine from us. The stated operating hours were read at the date of entry. Subject to prior sale, changes, and errors. Full free lift,

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Cgjdpfx Aaov Eguye Njt Available: March / April 2025.

Condition: used, empty load weight: 8,910 kg, maximum load weight: 30,090 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2006, suspension: air, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cgodpoxfv R Tsfx Aa Njt - .

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring Codpog Ewwrefx Aa Nogt -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 1,80,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 1,80,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Codpfxowdmy Sj Aa Nsgt Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Year of construction: 2014, condition: excellent (used), Approx. 4.488 Tonnes - 250mm⌀ Billets of Certified Titanium Aluminide Alloy TIAL48-2-2 = TiAl Cr Nb VAR ingot (2014) Ingot diameter Approx. 250mm⌀ x Length 400-600 mm. Cedpfx Ajx H Tb Uea Nsgt

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,400 mm, total length: 1,000 mm, total height: 950 mm, overall weight: 195 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO 25" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Standart Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily Csdpfxshpuhte Aa Njgt - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) "R-PRO" Optional Features - Ribbing Attachments (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Dijital Encoder (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Circular Saw (Optional) (R-Pro 25 Plus) - Manual Guillotine Shear (Optional) (R-Pro MAX) - Sliding Shear (Optional) (R-Pro DUO) Please contact us for more information and prices...

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles Codey H Db Eopfx Aa Negt all stainless steel 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Condition: used, Year of construction: 2018, operating hours: 1,833 h, * Radio * Driver's suspension seat ----Superstructure: ROPS cab with cabin heating, Yanmar 4-cylinder engine type 4TNV88-PBTB, 2185 cc, 39 hp, travel speed 2.8-5.2 km/h, dozer blade 1840x430mm, track width 400 mm, max digging depth 3,625mm. 4 additional hydraulic outlets, bucket (1350mm), hydraulic quick coupler with swing motor (Powertilt). ----The following accessories are available at extra cost: grading bucket (width 1,350mm) €1,000 net; Korte grapple bucket (500mm) with rotation servo €1,750 net; Atlas Copco demolition hammer, mint condition, type SB 152 Vibro Silenced, €3,900 net. Drainage bucket with teeth (year 2017), width approx. 300mm, capacity: 0.066m³ €750 net. Codpfxjy Iudgj Aa Njgt Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION PROVIDED WITHOUT WARRANTY, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis of all purchase agreements, invoices, pro forma invoices, orders, and sales talks are our General Terms and Conditions (see legal notice/imprint).

Condition: used, Used DC motor Cgjdpfx Aowbhg Uoa Njt Anchor 460V // Current 325A field 340V // current 4,7 A Speed 1880rpm Power 138kW

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: GP3180, Technical data: 1x Demag KBK 2 pillar slewing crane, rated load 500KG Rated load at full outreach: 500KG Height: approx. 3.5 + 0.3m column extension Underside of jib: approx. 3.3m Outreach: 3m Hook height: approx. 2.9m Total weight: approx. 600KG Cgedpey D D Adsfx Aa Nst With Liftket 500KG chain hoist, year 2012 Incl. bolts, cable trolley, trolley drive, end cap, etc. Slewing range 300°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim More cranes available, capacities 80–5000Kg, please enquire See photos Shipping by forwarding agent or collection by appointment only

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA176/177/1177, Technical data: 1x Demag KBK 1 pillar jib crane SWL 125KG with Demag DC chain hoist Crane is available 3x!!! Load capacity at full outreach: 125KG Height: approx. 3.15 m (NR176/177) - (NR1177: 3 m height) Underside of jib: approx. 2.6 m Outreach: 4 m Hook height: approx. 2.3 m Total weight: approx. 300KG with 125KG Demag DC chain hoist (125Kg - YOM 2010) Including pins, cable trolley, carriage, end cap, etc. Cjdpfx Aasyzblwj Nogt Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80-5000Kg, please inquire See pictures Shipping by freight forwarding or pickup by appointment only

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: MIKA167/168, Technical Data: 1x Demag KBK 2 pillar-mounted slewing jib crane, SWL 125kg, with Demag DC chain hoist 125kg Crane is available 2x!!! Rated load at full outreach: 125kg Height: approx. 3.5 m Underside of jib: approx. 3.3 m Jib outreach: 3 m Hook height: approx. 2.9 m Total weight: approx. 450 kg Equipped with 125kg Demag DC chain hoist Incl. pins, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400V 16A Cgodpfx Aeyzblqsa Not Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, capacity 80–5000kg – please enquire See pictures Dispatch via freight forwarder or collection by appointment only.