Used Bernardo Goliath 660 X 3000 for sale (63,487)

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm Gkjdpfst Tw Uiex Ap Dsc - Cutting angle adjustable mot. 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch - Cutting line lighting - Sheet support - Rear guard with protective grille

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Gkedpfxowf Sfve Ap Dsc

Condition: used, functionality: fully functional, Sacma 3000x6 mechanical guillotine shear, motorized back gauge, throat depth 500 mm, dimensions: 390x195x200 (h) cm, weight: 9900 kg Gkodpfjwn Hfcox Ap Djc

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm ; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW Gsdpfxjyq Ngme Ap Dskc • Tailstock: CM5; 500 kgf thrust; rotating tip • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetting: Manual • Programming: Conversational IGF

Year of construction: 1971, condition: excellent (used), CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Centre height: 316mm Grinding Ø: 632mm Grinding length: 3000mm Grinding stone dimensions:800 x 305 x 105mm Grinding stone speeds: 1000Rpm Table inclasement: 9,1° Coolant system: Yes Filtration: Yes CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Length: 10100mm Width: 2600mm Height: 2300mm Gkjdpfx Ajm Twz Aop Doc Weight: 15000kg

Condition: good (used), In good technical condition and fully functional. Year of manufacture: 1981 Gkodpfx Asy Hr R Iep Doc Max. working length: 3000 mm Max. sheet thickness: 25 mm

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm Gjdpfox I Nbtox Ap Dokc X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MTF, belt conveyor on solid base frame, height adjustable -Type: GL-HM 140 Godstp Rfpspfx Ap Dskc -Speed: 9 m/min -Belt width: 275 mm -Conveyor length: 3000 mm -Drive: ATB 0.18 kW, see photo type plate -Transport dimensions: 3060/500/H930 mm -Weight: 89 kg

Condition: good (used), Technical specifications for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical setup information: Number of shelving rows: 01 pc. Shelf length: 1,660 mm Number of bays per shelving row: 01 pc. Scope of delivery includes: 02x shelving uprights, used Material finish: Sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31 x 60 x 0.88 mm Weight per piece: approx. 8.92 kg Incl. bracing and base plates (Rack uprights are pre-assembled) 2,490 mm high 600 mm deep 06x wire mesh shelves, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 590 mm Total height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight per piece: approx. 6.90 kg Note: Water-permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows good air circulation, suitable for example in deep-freeze warehouses. Light-transmitting – creates a bright working environment in the warehouse. 24x shelf supports, used Suitable for slotted uprights Material finish: Sendzimir galvanized 01x diagonal bracing, used Model designation: KV31313 Weight per piece: approx. 0.405 kg Material finish: Sendzimir galvanized 01x load sign Indicating bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Godpfx Aeyzyt Hsp Dokc Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any required delivery or shipping of this item will incur additional costs, which can be requested individually depending on the place of delivery and scope of supply.

Condition: good (used), Technical Data for Shelving System: Shelving system: SSI Schäfer Type: R 3000 Technical Data for the Setup: Number of shelving rows: 1 unit Length of shelves: 1,660 mm Number of bays per row: 1 unit Scope of delivery includes: 02x Shelf rack uprights, used Material colour: sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31 x 60 x 0.88 mm Weight / unit: approx. 8.92 kg Incl. cross brace and base plates Gksdoyzwz Ujpfx Ap Doc (Rack uprights are pre-assembled) Height: 2,490 mm Depth: 600 mm 06x Shelves, used Material colour: sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / unit: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 24x Shelf supports, used Suitable for slotted uprights Material colour: sendzimir galvanized 01x Cross brace, used Model designation: KV31313 Weight / unit: approx. 0.405 kg / unit Material colour: sendzimir galvanized 01x Load sign With information on bay and shelf loads, manufacturer, and order number Size: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Transport or shipping of this item can be arranged for an additional charge, depending on delivery location and scope, to be requested individually from us.

Year of construction: 2012, condition: excellent (used), WEINIG window production line consists of: Gkjdpfx Apsh H Iyxo Djc Unirex 3000 machining center Univar 15 Unitex 15

Condition: excellent (used), Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg Gkodpfxswv Nl Ie Ap Dec

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Gkedpfoiivfqox Ap Dec Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Gsdpfxeiivc Ds Ap Djkc Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm Gkjdsiivgrjpfx Ap Dec from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: used, mileage: 3,06,127 km, first registration: 10/2013, axle configuration: 4x4, total length: 10,600 mm, total width: 2,520 mm, total height: 300 mm, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, crane, cruise control, electronic stability program (ESP), power assisted steering, traction control, - Stability control = Additional options and accessories = - Differential lock = Notes = DB ACTROS 4146 AK MP3 8X8 Crane Truck with Fassi 660 Loader Crane / Winch and Slewing Servo !! SINGLE TIRES !! • ALL-WHEEL drive! • Full leaf spring suspension! • EURO 5 • Telligent 16-speed transmission with clutch pedal • Air conditioning • Enhanced engine brake • Cruise control • Auxiliary heater • Hill start assist • 2 x differential locks • ABS deactivatable • Signal horn • Light bar with LED work lights • Rotating beacons • Multifunction steering wheel • Radio-CD player • Telephone • Tires: 395/85 R20 Gjdpjwmn Tlefx Ap Dokc • Good tire tread! • Unladen weight: 22,544 kg • Perm. GVW: 32,000 kg (36,000 kg technically possible!) • Trailer hitch – jaw coupling • Perm. trailer load: 12,500 kg • 2-line trailer brake system • Overall vehicle length: 10,600 mm Superstructure: FASSI 660 XD Type F600A / 660 AXP 24 • Remote control • 4 hydraulic extensions • Hydraulic ROTATOR • Hydraulic WINCH • 4-point outriggers • 10-ton lifting beam • Flatbed body MÜLLER with side walls Special equipment: 2-line trailer brake, trailer coupling: G 150, 24V / 15-pin trailer socket, brushed steel dashboard, Audio system: CD radio (Bluetooth incl. permanently installed phone), 220 Ah battery, air horn(s) on cab roof, Cab: reinforced cab suspension strut, Cab: movable cab entry, Cab: comfort suspension (1.8 Hz), construction vehicle filter, 100 A alternator, 400 l fuel tank, reinforced clutch, reinforced cooling, PTO MB 10C, programmable special module, revolving beacon left/right, heat insulated side windows, circuit breaker, Cab seats: comfort driver's seat, air-sprung incl. horizontal suspension, sun visor, sun blind side windows, driver and passenger door, power inverter 24V / 12V 15 A, reinforced rear axle stabilizer, 12 V socket, front bumper in steel, crossbeam for trailer coupling, additional thermal insulation, auxiliary water heater, transmission oil cooler Further equipment: 2nd steered front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing coupling, vertical exhaust muffler behind cab, electric & heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: S (short), suspension: leaf/leaf, electric windows, 16-speed transmission, rear axle H 7, 13 t, crown gear 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, model revision from 06/2008, engine 12.0 l - 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent transmission, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio prep, phone/fax prep, immobilizer, heat insulating glazing, central locking Cab: single

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, filling weight (max.): 5,00,000 g, stroke rate (min.): 25 1/min, stroke rate (max.): 120 1/min, TECHNICAL DETAILS Molding process: Sliding plate technology Servo-driven molding system Suitable for meat, poultry, and non-meat products Typical throughput: 4,082 kg/h Line width: 660 mm Stroke rate: 25–100 strokes/min Stroke rate SX: max. 120 strokes/min Gkedpfx Apjzzp Sio Dsc Capacity of the filling hopper: 500 kg EQUIPMENT Servo drive Sliding plate molding system Large-volume filling hopper

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification Godoiivgyjpfx Ap Dekc central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package Gksdpfx Apjiink Sj Dsc CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Gsdpoc S N Nqofx Ap Dskc Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 Gedpfxof T Rzfj Ap Dekc max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism - Siemens PLC Control - CE certificate - control console on wheels

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type -Motor: Loher 3.5 kW 955 rpm Ex protected -Volume flow: m³/h -Connection: inlet Ø 500 mm Gksdstz Hubepfx Ap Dec -Connection: Output 400 x 500 mm -Dimensions: 1160/880/H950 mm -Weight: 153 kg

Condition: excellent (used), Gemac Jungheinrich Meta Pallet Rack Beam, Type S Godpfx Aew N Nbnjp Dekc The pallet rack beam, Type S, with a span of 2700 mm, provides space for three Euro pallets per beam pair. Used as a replacement for damaged rack beams, e.g., after a rack inspection, and for expanding existing racking systems. The beams can be individually hung at a 50 mm grid in height. Manufacturer: Gemac, Jungheinrich / Meta Model / Type: S Beam length: 2700 mm Load capacity per beam pair: max. 3000 kg Box profile: 140 x 50 mm H x D Overall length: 2780 mm Material: cold-rolled steel Profile design: Rectangular profile Mounting: Hook tabs on each side of the beam for hanging, secured with a locking pin. Surface: Powder-coated Color: Rotorange RAL 2001 Scope of delivery: 1 x pallet rack beam 2700 x 140 x 50 mm, orange You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t Gkodpfx Aou N D Sbjp Dsc dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: good (used), Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 1000 x 660 mm Gkodpfx Aox Tpdlop Djc -Number: 2x flat angles available -Price: per piece -Dimensions: 1000/660/H12 mm -Weight: 10 kg/pc.