Used Beutler D8-200 for sale (16,516)

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Podpoy D Rxrefx Alwogt Technical Data: - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: new, functionality: fully functional, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,067 mm, loading space height: 400 mm, total length: 2,910 mm, total width: 1,500 mm, total height: 900 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz HIT 200 Tipper NEW VEHICLE Internal dimensions: 201 cm x 106 cm Gross weight: 750 kg Payload: 622 kg Side wall height: 40 cm Unbraked single-axle low-bed trailer Removable side walls made of galvanized steel sheet Rear and front panels foldable and removable Easily convertible to a flatbed transport platform Bolted and galvanized steel frame Pgedpfxsy Dq Dho Alwst Folding drawbar Phenolic plywood floor 13-pin electrical system Rear lights with reversing light, fog light, and triangular reflectors Plastic fenders Jockey wheel 13-inch M+S tires The trailer can be stored vertically on the rear panel when not in use Optional accessories: - 100 km/h upgrade - Rear support stands - Mesh sides - Side extension panels 40 cm - Aluminum lid with holder (e.g., for bicycle carriers) - Flat tarpaulin with or without bows - High tarpaulin 80 cm - Coarse or fine mesh net - Spare wheel with holder - Loading ramps Additional accessories available on request! Images are for illustration purposes and may show optional equipment subject to extra charge. Plus vehicle registration documents and shipping to Gera €100 net Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get expert advice by phone, visit our website, or stop by in person.

Condition: new, functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, color: other, overall weight: 12,400 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE DMK series are secondary impact crushers that leading to the crush of medium and high hardness materials, which are used after jaw crushers or primer impact crushers. DMK crushers are also designed to reduce wear costs while increasing capacity and cubic production. It reduces medium and high hardness materials such as limestone, dolomite, granite and basalt into the desired size of asphalt and concrete aggregate. The ease of maintenance and adjustment is one of the major advantages of this type of crusher. Hydraulic body opening system, adjustment of crushing plates from the outside, easy pallet and lining replacement ensure that these types of crushers can be used easily on site conditions. GENERAL SPECIFICATIONS AND FUTURES: -High capacity -High reduction ratio -Wear surfaces are protected by solid filler electrode welding -Hammers and crushing plates are manufactured from high manganese steel casting -Inner surfaces of the crusher is coated with wear resistant lining plates -Easy maintenance thanks to hydraulic adjustment system TECHNICAL SPECIFICATIONS Pgjdpfx Alezibf Rswet • Model: FABO DMK-01 • Type: Secondary Impact Crusher • Capacity: 130-200 tph • Size: 1120 x 1000 mm • Max Feeding: 450mm • Motor: Heavy duty GAMAK, 160 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 12400 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 1999, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 2,780 m³/h, AL-KO Mobil-Jet 200, 3 kW, 400 V, year of manufacture 1999, 2,780 m³/h, connection diameter 200 mm, functional/can be demonstrated. Collection and loading will be carried out by the buyer. Piping can be included upon request. Price: EUR 1,900.00 net, ex works. Pgedpfozx Swiex Alwet

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, We offer this used GRAULE ZS 200 - F miter saw, year of construction 2003. Manufacturer: GRAULE Model: ZS 200 - F Serial number: 2003/3-13 Year of manufacture: 2003 Pjdpfx Aezx N T Iolwjgt Saw blade diameter: 520 mm Bore diameter: 50 mm Rated voltage: 400/230 V Rated current: 6.4 A Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, new ! all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW Pjdpjzxrdvsfx Alwjgt overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: Test plate with support ribs Pgsdpfx Alezldm Nowot -Clamping surface: 300 x 200 mm -Sheet thickness: 10 mm -Plate: with supporting ribs -Transport dimensions: 446/200/H74 mm -Weight: 11 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder Pjdpfxezr Hcao Alwjgt -Punch tool: Notching tool -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 200/120/H150 mm -Weight: 13 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Pedpfxezr U Aue Alwogt Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2013, operating hours: 4,657 h, Equipment: all wheel drive, * Enclosed cab * Load sensing shut-off * Rear-view camera * Air conditioning * CD radio ----Vehicle number 12423 Pjdpfjzxaxbex Alwogt ----Errors and prior sale excepted

Condition: used, Year of construction: 1999, functionality: unexamined, volume flow: 200 m³/h, input voltage: 400 V, input frequency: 50 Hz, type of cooling: air, PVR Vacuum Pump Type PVL 200 Capacity 200 m³/h Absolute pressure 0.5 mbar Year of manufacture 1999 Price €3,000 Pgsdpfx Alozwva Sswot

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Pgsdpfxjzww Tys Alwet Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Pgedpfxjy Hkd He Alwjt Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Pgsdpfxsy Hlaps Alwot Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Podpfx Alezii Akjwogt Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking Pedpezinlwofx Alwjgt TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 150-200 Tons/hour capacity of Screening & Washing Plant: - 30m3 Sand Feeding Hopper -1600x5000mm Vibrating Screen - STE 1224 Dewatering Screen & Hydrocyclone - Conveyor Belts Podpfjzd Eurex Alwogt - Control Cabin, Electrick Panel and Cables FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! Pedpfxozd Evis Alwsgt *Installation and Operator Training FREE FABO manufactures and installs stationary type stone screening & washing plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 200-350 Tons/hour capacity of Washing and Screening Plant: - Riverstone Feeding Bunker - 1300x4000x2 Decks Vibrating Screen - 2000x6000x4 Decks Vibrating Screen with washing system - 1500x4000mm Dewatering screen with Hydrocyclone - Conveyor Belt System - Control Panel and Automation System FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Pgjdpfx Aszrzxielwjt Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Powered tools: possible depending on equipment Tailstock: optional, often NC-controlled (SK30)

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Psdpfx Aezwgt Nolwogt Weight: approx 80 KG

Condition: used, mileage: 3,547 km, gearing type: other, fuel type: electric, color: red, first registration: 08/2016, emission class: none, suspension: other, Year of construction: 2016, operating hours: 3,547 h, driver cabin: other, fuel: electricity, For sale is a BT LPE 200/8 in red, first registered in August 2016. With only 1,728 km on the odometer, the vehicle is in very good, well-maintained condition and is ready for immediate use. The BT LPE 200/8 impresses with its reliable technology and easy operation – ideal for warehouses, industrial facilities, or logistics companies. Pjdpfxszvhyhj Alwogt Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 2,511 km, gearing type: other, fuel type: electric, color: red, first registration: 08/2016, emission class: none, suspension: other, Year of construction: 2016, operating hours: 2,511 h, driver cabin: other, fuel: electricity, For sale is a BT LPE 200/8 in red, first registered in August 2016. With 2,540 km on the odometer, the vehicle is in very good, well-maintained condition and is ready for immediate use. The BT LPE 200/8 impresses with its reliable technology and easy operation – ideal for warehouses, industrial facilities, or logistics companies. Sale only to commercial businesses (agriculture, freelancers, small Pgodpfx Aezvhynolwot and large businesses) or for export. Subject to errors and prior sale.

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector Pgsdpozw Atljfx Alwst • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, FTNON-JBT MOP-200 onion peeling machine + SRI-200 sorting table For sale: an FTNON-JBT MOP-200 industrial onion peeling machine, complete with the accompanying FTNON-JBT SRI-200 sorting table. The equipment is suitable for industrial onion processing and can be used for inspecting and sorting the product after the peeling process. The two machines can be operated as part of a technological line. Machine details: Manufacturer: FTNON-JBT Type: MOP-200 onion peeling machine Type: SRI-200 sorting table Type: with onion feeding hopper Application: industrial onion peeling and sorting Stainless steel, food-grade design Suitable for industrial use Sold together with the sorting table connected to the onion peeling machine. Pgsdpjzw A R Rjfx Alwet The machines are in used condition. Viewing is possible by prior arrangement. The equipment is primarily recommended for food processing plants that want to expand their onion processing capacity or supplement their existing technological line. Additional technical data, photos, and information are available upon request.

Condition: good (used), Round brush, grinding wheel, chip brush, wire brush -Round brush: Steel wire brush, 200 pieces Pgedpfezuap Ssx Alwst -Outer diameter: 126 mm -Width: 35 mm -Bore diameter: 13 mm -Submission/Price: complete -Weight: 0.5 kg/piece