Used Bolt Welding Device for sale (17,153)

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner with a load capacity of 2 tons, including infinitely adjustable clamping extensions and clamping jaws. Kedpfjzk Ra Tjx Aafsdp Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 Amperes. Dimensions: Length: 1940 mm Width: 1200 mm Disc diameter: 1200 mm Height (tilted): min. 700 mm, max. 1550 mm Height (horizontal): min. 900 mm, max. 1700 mm Weight: 1750 kg.

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Kedpfszbvn Eox Aafjdp Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2007, condition: used, dimensions 1.900 x 2.131 x 3.023 ,, weight of the machine ca. ca. 2.200 kg In our assessment, the heating element welding machine is in good used condition. Technical Specifications: Compressed Air: - Max. operating pressure: 6 bar - Compressed air consumption: 0.2 Nm³/cycle at 5 bar Heating Mirror: - 2x12 WALTOW heating cartridges, Ø12.5 x 400 mm, 1000 Watts, 230 Volts - 2x PT100 thermocouples - Heat-up time to 350°C: approx. 50 min Vacuum Pump: - BECKER vacuum pump, Model VT 4.16, 550 Watts Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, Kdodpfjzbvnxjx Aafsp as well as prior sale!

Year of construction: 2023, condition: used, control Siemens voltage 400V 50 Hz V current intensivity 63 A In our assessment, the robotic welding system is in like-new condition. Technical Specifications: - MIG welding of individual components onto cooling plates using a robot - Automatic torch cleaning and wire cutting - 2-station rotary table for loading during the welding process - Siemens control system Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Kdjdpfozbvnfox Aafsp Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Edge trimming machine Kodpfx Ajwiwnqoafedp Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: used, Year of construction: 2012, manufacture NIMAK electric cabinet Rexroth - Bosch Group dimension div. verfügbar We offer approximately 100 spot welding guns in various sizes. Kdodpfoxrg Ebjx Aafjp Application: Automotive bodywork Each welding gun is sold as a complete unit, including control unit and control cabinet. The photos show a selection of different models. Year of manufacture: approx. 2012/2013 The welding guns are offered at individual prices. In our assessment, the goods are in good to very good used condition and can be inspected at short notice by appointment. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, functionality: fully functional, Ferwood Code: RU0011460 - Manufacturer Code: 2-056-17-8772 - Condition: Used - Functionality: Fully functional - Compatible Machine: HOMAG CNC - WEEKE - If interested we offer a revision service, contact us. Kodsv I A H Depfx Aafodp

Condition: used, Electrofusion Welding Machine, Electrofitting Welder, Welding Unit, DYTRON SVEL-1a, Used Machine Manufacturer: DYTRON Model: SVEL-1a Overall Dimensions: Width: 300 mm Kedpfx Asyiarhjafsdp Depth: 270 mm Height: 90 mm

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Kdsdpfx Aajrdf Acofop Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: used, Work table with "swallowtail" fixed cuttings Kodpfjhyxa Asx Aafsdp Overall size:1100x1400x800 mm Weight: 1880 kg

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Kdedpeu Nvh Uefx Aafsp Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Weight : 840 kg Electrical data : 415 V ; 150 kVA ; 50 Hz - equipped with a photocell - tool water cooled

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. Kjdpfx Aasxnqt Uefedp The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Condition: good (used), Dimensions: 165 cm x 114 cm x 26 cm Weight: 1310 kg Table size: 1500 x 980 x 110 mm Ksdpfozi R Nxox Aafsdp

Condition: new, Year of construction: 2023, operating hours: 5 h, functionality: fully functional, overall weight: 3,000 kg, load capacity: 20 kg, arm reach: 3,100 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, teach pendant model: Smart.PAD, control cabinet width: 800 mm, warranty duration: 12 months, Equipment: documentation/manual, Welding Kit: Kedpjydd Sdsfx Aafsdp 1. Welding robot by KUKA model IONTEC prod. 2023 - Manipulator type KR 20 R-3100 with controler KRC4 - Maximum reach - 3100 mm - Payload max. - 20 kg - Positioning repeatability +/- 0.05 mm - Control KRC4 - KUKA System KSS 8.6 - PROFINET, Safe.Operation, ARC.Tech 2. Positioner 3-axis KUKA KP3-V2H max. 750kg / side L - 3000 mm - distance between plates D - 2000 mm - max. diametr of fixture 3. FRONIUS welding machine type TPS 400i LSC Advanced ( option: TPS 500i CMT or TPS 400i CMT ) Welding Packaging - Low Spater Control , LSC Advanced Welding Packaging - Standard Welding Packaging - Puls

Condition: like new (used), Year of construction: 2022, Equipment: documentation/manual, Welding Robot - Set with welder and 3-axis positioner: 1. Welding robot by KUKA model CYBERTECH - KR 8 R-2100-2 KRC4 prod. 2022 - Manipulator type KR8 R2100-2 - Maximum reach - 2100 mm - Payload max. - 20 kg - Positioning repeatability +/- 0.05 mm - Control KRC4 - System Software - KUKA System KSS 8.6 - System Sofware - PROFINET, Safe.Operation, - Welding Proces Software - KUKA.ARC.Tech Kodpjllyfijfx Aafsdp 2. Positioner 3-axis KUKA KP3-V2H max. 1000kg / side L - 2000 mm - distance between plates D - 1600 mm - max. diametr of fixture 3. FRONIUS welding machine type TPS 500i ( option: TPS 500i CMT ) Welding Packaging - PMC (Pulse Multi Control) Welding Packaging - Standard Welding Packaging - Puls

Condition: excellent (used), Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 1.25/2.75 -Item No.: 49189444 Kdsdpfxjzk Daae Aafjp -Individual components: see photos -Cardboard dimensions: 290/220/60 mm -Weight: 1.1 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,412 h, number of axes: 6, Welding robot manufactured in 2012. This CLOOS Welding Shop System features a complete modular welding shop with an enclosed welding booth, housed in a Dessauer welding safety enclosure. It includes 2 Cloos QRC 350 articulated welding robots, 2 torch cleaning stations, and multiple installed welding torches. The system is equipped with 2 Qineo Pulse 350 A power sources and 2 Ulmatec extraction units. If you are looking to get high-quality welding capabilities, consider the CLOOS Welding Shop System we have for sale. Contact us for further details. Technical Specifications • System Type: Complete modular robotic welding cell / enclosed welding booth system • Enclosure Dimensions: Approx. 16,500 × 10,000 × 3,500 mm (L × W × H) • Robot Systems: 2 × CLOOS QRC 350 articulated welding robots • Controller: ROTROL V6 • Torch Cleaning Stations: 2 × CMR 7C automatic torch cleaning stations (one per robot) • Installed Welding Torches: • 2 × PPAW (Plasma Powder Arc Welding) torches • 2 × MIG/MAG welding torches • Welding Power Sources: • 2 × CLOOS Qineo Pulse 350 A power sources • 2 x Qineo TIG Tronic 350 • 2 × PPAW 350 A plasma power sources • Extraction Systems: • 2 × ULMATEC IRF 40-2-2 / 3.0 MD extraction units • Motor power: 3.0 kW • Power supply: 400 V / 50 Hz • Airflow: 4,080 m³/h per unit • Maximum vacuum: 3,230 Pa • Filter area: 40 m² • 2 permanent filter cartridges (Category M) • Manual rotary filter cleaning • Dust collection drawer (approx. 25 L) • Internal ducting / piping system • Extraction Ducting: Kdsdpfxezk Idpe Aafep • Approx. 10 m spiral ducting (Ø224 mm) • Robot Equipment: • Point editor • Quinto II serial interface • MC3 / TIG / Quinto analogue interface • MDA 4 interface card • Plug-in I/O expansion (16 inputs / outputs) • Qirox V5 welding technology switching • Qirox Safety Controller • Cooling System: Water cooling unit • Gas Equipment: • Argon pressure regulator • Powder control system • Powder feeder CPF1-6 • Powder distributor (VSP) • Workholding: • Angle clamping fixtures • Rotary worktables with pneumatic clamps • Installation Type: Stationary Additional Information: • Robot Operating Hours: • Robot 1: 45,532 h • Robot 2: 41,412 h

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Kodpfx Ajdqzbreafsdp Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Kdjdpfey A Tpqjx Aafsp Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg Kdjdpfscdy I Rjx Aafjp

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Kodpocnw T Isfx Aafsdp Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Image on the right) 3 m extraction arm Application area Medium amounts of smoke/dust Regular use Benefits Low need for repositioning the extraction hood Contamination-free filter change Kedodqzcvopfx Aafjdp Safe operation thanks to rotary field detection High cost-effectiveness due to long filter service life Features Safe operation through filter monitoring Extraction hood can be rotated and swiveled 360 degrees Start/stop automatic (optional) Workplace lighting (optional) Technical data Process: 2-stage Filter type: Disposable filter Filter area: approx. 20 m² Separation rate: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filters: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 3 m Diameter of suction connection: Ø 150 mm Power connection: 3 x 400 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Kdodpfx Aaocnw U Djfjp Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: Kedpecqy I Ssfx Aafsdp IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: good (used), SCHUNK SVP-2 201760 TRIBOS S clamping device SRE reducing inserts Z7 (10 pieces) In very good condition Kdedpfjzizguex Aafjp SCHUNK Tribos chuck jaws and reducing sleeves are also available.