Used Carpet And Rug Display Equipment for sale (49,879)

Condition: excellent (used), Hainbuch MS Dock Gusdpozhrflofx Al Ajd Type: SW.ST.1038.0001.00 Advantages: Manual operation – no tensioning cylinder required Precise manual clamping possible Mandrels can be used on baseplates Very good condition

Condition: good (used), Year of construction: 2007, shaft length: 1,064 mm, Internal article number: 26037 Laser welding machine Rofin Starweld 90 Year of manufacture: 2007 YAG laser Power: 4.5 kW Laser power: 90 W Pulse peak power: 5.5 kW Pulse duration: 0.3 - 20 ms Wavelength: 1064 mm Dimensions (L x W x H): 100 x 50 x 100 cm Measured without table and stand Weight: approx. 170 kg Unfortunately, I cannot put the system into operation because it needs to be connected to a water circuit with deionized water. Gjdpfx Aey D Nlqel Aeud Furthermore, an error message is displayed indicating that the fiber optic cables need to be checked.

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Gjdeq I Nxdspfx Al Aeud Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Working Principle: The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Guedpfx Alotxhybj Aed Discharge size: 3–50 mm Capacity: 45–1200 t/h Motor power: 90–630 kW Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), Year of construction: 2025, Impact Crusher: Structure, Operation, and Technical Specifications An impact crusher is a high-efficiency crushing machine widely used in mining, cement, construction, and recycling industries. It is designed to crush materials by utilizing the energy of impact rather than pressure, making it ideal for medium-hard and soft materials such as limestone, gypsum, coal, and concrete aggregates. Its ability to produce uniform, cubic-shaped particles makes it a preferred choice for aggregate production and fine crushing applications. Working Principle The impact crusher operates on a simple yet powerful principle: material is fed into the crushing chamber and struck by high-speed rotating blow bars mounted on a rotor. The kinetic energy from the rotor transfers to the material, causing it to break upon collision with the impact plates (also known as breaker plates). The crushed material rebounds within the chamber for secondary impacts until it reaches the desired size and exits through the discharge opening. The process involves: Primary Impact: Material is hit by blow bars and thrown against the impact plates. Secondary Impact: Rebounded fragments collide again with the rotor or other particles, achieving finer crushing and better shape. Structural Composition An impact crusher consists of several key components that ensure efficient operation and durability: Rotor Assembly: The core component, equipped with blow bars that deliver high-speed impact energy. Impact Plates (Aprons): Adjustable plates that control the crushing gap and final product size. Feed Inlet and Discharge Outlet: Designed for smooth material flow and uniform discharge. Frame and Housing: Heavy-duty welded structure providing stability and vibration resistance. Adjusting Device: Hydraulic or mechanical system for controlling the gap between rotor and impact plates. Safety Mechanism: Hydraulic opening system for easy maintenance and overload protection. Technical Highlights Feed size: ≤500 mm Discharge size: 0–60 mm (adjustable) Capacity: 30–800 t/h Motor power: 45–560 kW Rotor speed: 500–1500 rpm Performance Features: High Crushing Efficiency: The high-speed rotor and optimized chamber design ensure strong impact force and high reduction ratio. Excellent Particle Shape: Produces cubic, uniform aggregates suitable for concrete and asphalt production. Adjustable Output Size: Hydraulic or mechanical adjustment allows precise control of product size. Easy Maintenance: Replaceable blow bars and liners with quick access doors simplify servicing. Versatile Applications: Suitable for primary, secondary, and tertiary crushing in various industries. Types of Impact Crushers Horizontal Shaft Impact (HSI) Crusher: Gusdpfx Aov E Ddlsl Asd Uses a horizontal rotor to deliver impact energy. Ideal for soft to medium-hard materials and widely used in aggregate and recycling applications. Conclusion The impact crusher combines high-speed impact energy with a robust structural design to deliver efficient, reliable, and versatile crushing performance. Its ability to produce well-shaped aggregates, adjustable output sizes, and low maintenance requirements make it indispensable in modern crushing systems. Whether in mining, construction, or recycling, the impact crusher remains a key machine for achieving high productivity and superior material quality.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- Gusdpjq I Nvijfx Al Aod ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Guedpfx Aeq I Nw Iel Asd

Condition: used, Year of construction: 2011, Dimensions: Lifter 1 2.010 x 2.050 x 2.074 mm Dead weights: Lifter 1 1.225 kg weight max. in kg 2.000 kg Effective stroke 1.040 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Gjdpfx Aezhpatjl Ajud

Condition: used, Year of construction: 2013, Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  - Brewhouse capacity: 250 liters per batch - Production cycle: approx. 2 weeks per batch - Bottling cycle: 1 day per batch - Production months/year: 10 months - Shelf life of beer: 18 months - Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) - Fermentation tank capacity: 500 liters each (3 tanks) - Brewing system power: 15 kW - Cooling system power: 2.3 kW - Labeling power: 2 kW Scope of Delivery  - 1 x Brewing Unit | SlowBeer | MB 250 E | 2013 - 1 x Plate Heat Exchanger | Sondex Italia | S4A-IG16 | 2013 - 3 x Fermentation Tanks | — | — | — (500 L each, atmospheric) - 1 x Cooling Unit | Winus | C2-W3R 4T | 2012 - 1 x Isothermal Hot Water Tank | Industrias Céspedes | — | 2011 - 1 x Labelling Machine | CDA | R1000 | — - 1 x Filling Machine | Toscana | — | — - 1 x Manual Capping Machine | — | P0085 | — - 1 x Coder | — | MC150V | 2013 - 1 x Electric Mill | SOMMER | 11717 | — - 1 x Compressor | FINI | — | — - 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) - 1 x Steel Water Heating Tank | — | — | — (900 L) - 2 x Water Softeners | — | — | — - 2 x Hot Liquor Tanks | — | — | — (1 electric, 1 butane-based – unused) Gjdpfx Aewcyc Dol Aeud Optional Services: Dismantling, transport, and installation – available upon request.  

Year of construction: 2014, condition: excellent (used), 1- Gsdpfx Alsyxg Ire Asud 250 ml slim 330 ml sleek 500 ml base Ektam filler mega block 40/6 CFT seamer made in Italy 6 heads 2014 model Line is in or working condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,240 h, Terex-Pegson 1100×800 (Pegson 1180) Year: 2007 Godpozdq Nhsfx Al Asud Hours: 7,240 h Well-maintained Terex-Pegson 1100×800 jaw crusher, also known as Pegson 1180. The machine has been operated by a single owner since it was new and remains in very good working condition. Technical specifications: Feed opening: 1100 × 800 mm Hydraulic CSS adjustment: 90–150 mm CAT C13 engine Hopper capacity: 9.1 m³ Grizzly feeder Side conveyor Operating weight: 56,000 kg Additional equipment: Spare jaw plates included Main advantages: Single owner since new Very good technical condition Reliable CAT C13 engine Large feed opening for high productivity Suitable for quarrying, recycling, and aggregate production Fast access to spare parts Financing available. Export documentation can be arranged. Machine available immediately. Inspection possible in Poland. Worldwide delivery available.

Condition: good (used), Year of construction: 2021, functionality: fully functional, 21x Logopak 410 VM90 industrial label applicators (print & apply) – manufactured in 2021 A total of 21 identical Logopak 410 VM90 print & apply labeling systems are for sale. The units were manufactured in 2021 and put into operation in a modern logistics center starting in 2023. The labeling systems are being sold due to a process change and/or facility modernization. The systems are in working and well-maintained condition and can be inspected by appointment. Technical data: Manufacturer: Logopak Model: 410 VM90 – T01P06 Year of manufacture: 2021 Voltage: 100–240 V AC, 50–60 Hz Gjdpfxszltq Ro Al Aeud Current consumption: 8 A Condition: Used Functional CE marking present Scope of supply: Logopak 410 VM90 label applicator Control cabinet with operating panel Machine frame Signal lamp as shown in the pictures Notes: A total of 21 identical units are available. Sale individually or as a complete package is possible. Inspection possible by arrangement. We will gladly send further photos and technical information upon request.

Condition: like new (used), Year of construction: 2025, Maufung MF-Smart390A Auto Book Casing In & Joint Forming Line Model: MF-Smart390A Power Supply: 380V, 50HZ Mainframe Power: 9kW Block Thickness: 2–60mm Block Size (Max): 390×297mm Block Size (Min): 100×100mm Mechanical Speed: 600 pcs/hour Machine Dimensions (L×W×H): 4950×2650×2000mm Machine Weight: 2000kg Maufung Head and Tail Banding Machine Model: MF-HBM420 Model: MF-HBM420 Power Supply: 220V, 1 Phase, 50HZ Mainframe Power: 1.5kW Air Compressor: 6Bar Machine Speed: 11 pcs/minute Book Block Thickness: 10–60mm Gedpfxsy Sv Ine Al Aoud Book Block Size (Max): 350×420mm Book Block Size (Min): 100×100mm Machine Dimensions (L×W×H): 700×850×1550mm Machine Weight: 270kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, gearing type: other, fuel type: gasoline, first registration: 01/1990, emission class: none, suspension: other, Year of construction: 1990, operating hours: 2,078 h, driver cabin: other, * 2078 operating hours * New flails left and right * 2 pcs. new power belts * 4 pcs. new PTO shafts * 1 pc. new tensioner pulley ... Used vehicle, incl. VAT. Godpfxoy Hbw Ds Al Ajud

Condition: ready for operation (used), functionality: fully functional, Control panel for salt spreader: Gusdpouk Hmcjfx Al Aod - Küpper-Weisser / Pietsch - 12V connection - for 1-chamber salt spreader Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: good (used), machine/vehicle number: 3571, total length: 4,900 mm, total width: 4,000 mm, Year of construction: 2021, operation weight: 5,600 kg, load capacity: 80,000 kg, Seacom RT20-80T from Uniktruck Guodpozlun Rofx Al Ajd

Condition: used, For glass scale, rule, digital display, measuring stick, length measuring system, linear scale, fluorescent display, glass scale, rule, length measuring device, linear scale, position indicator, digital scales, digital scale -for: turning and milling machines -Manufacturer: Anilam -Type: MicroWizard A160210 -Number: 1x ads available -Price: per piece -Dimensions: 300/260/H150 mm -Weight: 3.2 kg Godpjcc Enhjfx Al Aoud

Condition: used, For glass scale, rule, digital display, measuring stick, length measuring system, linear scale, fluorescent display, glass scale, rule, length measuring device, linear scale, position indicator, digital scales, digital scale -for: turning and milling machines -Manufacturer: sutron electronic -Type: IZVA345T 80439000 -Dimensions: 280/250/H95 mm -Weight: 3.2 kg Gujdpfx Alocc Engj Aod

Condition: used, For glass scale, rule, digital display, measuring stick, length measuring system, linear scale, fluorescent display, glass scale, rule, length measuring device, linear scale, position indicator, digital scales, digital scale Gjdpfx Alocpnl Ss Aeud -for: turning and milling machines -Manufacturer: sutron electronic -Type: IZVA342T 8041206 -Dimensions: 290/270/H100 mm -Weight: 3.2 kg

Condition: used, For glass scale, rule, digital display, measuring stick, length measuring system, linear scale, fluorescent display, glass scale, rule, length measuring device, linear scale, position indicator, digital scales, digital scale Gusdpfx Asct Nvdel Ajd -for: turning and milling machines -Manufacturer: sutron electronic -Type: IZVA345T 80439000 -Dimensions: 290/270/H100 mm -Weight: 3.2 kg

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller display -Manufacturer: Kfm, temperature controller display -Type: 800 710 -Temperature range: 0...100°C Gedpfx Aepcmt Tsl Ajud -Voltage: 220V / 48-62 Hz -Quantity: 2x display available -Price per piece -Dimension: 125/100/H50 mm -Weight: 0.4 kg/pc.

Condition: good (used), Year of construction: 2020, Display, display module, display panel -Manufacturer: Rittal Carel, Display Panel -Rittal: Type LKH -Carel: Type RITRC000T0001 Guodpfxjx Sp Ubo Al Aed -Dimensions: 440/190/H60 mm -Weight: 0.6 kg

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer -Number: 7 available Gedjb A Ivzepfx Al Ajud -Price: per piece

Condition: good (used), Year of construction: 1996, Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping -Clamping table: 800 x 400 mm Gsdpexvraxefx Al Ajud -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Condition: good (used), Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm Gsdpfx Aed Tk Stjl Ajud -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg