Used Cartacci 7 V 0 for sale (1,05,649)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and Fgedpfxeuxfu Ne Af Sod significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library Fsdpfx Aoxcp Rbof Segd * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Fgedpfsxzqwtox Af Ssd

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Fjdpfxjv D Abte Af Sjgd

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Fjdpfx Aoxrf Nlef Sjgd

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Fedpfx Aexyk Tref Segd

Condition: good (used), mileage: 82,038 km, power: 169 kW (229.78 HP), first registration: 03/1992, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1992, Equipment: EBS, electric window regulation, fog lights, power mirror, = Further Options and Accessories = - Aluminum fuel tank - Leaf spring suspension - Brake booster - EPS (Electrohydraulic Power Steering) - Tipping hydraulics - Radio/CD player - Sunroof - Side door - Toolbox = Further Information = Suspension: Leaf spring suspension Front axle: Steered Unladen weight: 8,820 kg Payload: 9,180 kg Gross vehicle weight: 18,000 kg Technical condition: Good Fsdpfx Afjyut Euo Sjgd Visual condition: Good Warranty: No liability for printing or typographical errors, changes, prior sale, and errors reserved! Please contact Emad Al Shogran for more information. Vehicle number: 111 VOLVO FS7 / 4x2 / Full leaf suspension / Manual transmission / 82,000 km VIN: YB1E5A3A4NB483457 Transmission: Manual gearbox Suspension: Leaf/leaf 82,000 km original Good condition = Company Information = No liability for printing or typographical errors, changes, prior sale, and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Technical specifications belt dimensions 75 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Fgsdpjpag Tdefx Af Sed Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Weight approx. 104 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, Bernardo Horizontal Bandsaw HBS 275 - 400 V Fjded Du T Iepfx Af Sogd Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds, 400 V: 45 / 90 m/min Coolant pump, S1 100%: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 190 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for belt tension • Vise with quick-release mechanism • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 140014, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 8,000 rpm, spindle mount: MK 4, table length: 1,270 mm, table width: 305 mm, total height: 2,390 mm, total length: 2,170 mm, total width: 2,510 mm, overall weight: 2,500 kg, workpiece weight (max.): 200 kg, controller model: Siemens 828 D, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine, model V 760 L by MMD. The machine has been in single-shift operation since 2014 and shows normal signs of use. However, it is fully functional and continues to work precisely and reliably. Fodpfxjxnnb Ne Af Sjgd Technical specifications: Control: Siemens 828 D Automatic tool changer 3D probe included Automatic tool measurement The machine is powered on and can be inspected under operation at any time. Condition: Used, well-maintained, technically flawless. Regularly serviced, immediately ready for use. Year of manufacture: 2014 Operation: Single-shift operation Inspection and test run possible by appointment.

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Fgodew El Nhopfx Af Sod

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 /H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on the filter equipment Special voltage or special colour on request Your advantages: - Compact dimensions - ISI-TRONIC as standard - Electronically controlled EC fan as standard - Adjustable speed and air flow - Washable pre-filter - H13 particulate air filter provides separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of Fgsdeh Rynuspfx Af Ssd emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON- -series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Fgjdpjh Rynqsfx Af Sjd Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH * Depending on the filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for small to medium-sized machine workrooms. Your advantages: - Compact dimensions - High-efficiency EC fan as standard - Adjustable speed and air output (optional) - Washable pre-filter - H13 particulate air filter separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON-series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Condition: like new (used), Looks like new, with no signs of use. Comes from surplus stock of a closed factory, therefore we cannot guarantee that it is completely brand new. Fgodsydpxispfx Af Sod

Condition: new, Unit from surplus stock of closed factory Fgsdpfxjydp Ecs Af Sod

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20-NL-5012-2, Used Cabero GCHSD089MB/X7S-40 Y V dry cooler. Complete with 14 Ebm-papst W3G800-HG95-07 fans – 50/60 Hz – 0.9 kW – 770 rpm – 800 mm diameter, providing a total airflow of 214,700 m³/h. Also includes a control cabinet with Ziehl-Abegg UNIcon fan controller. Fedpfx Afjx A Tyae Segd Specifications: Brand: Cabero Model: GCHSD089MB/X7S-40 Y V Product type: Dry cooler Capacity: 428.9 kW Number of fans: 14 Fan speed: 770 rpm Coolant: Glycol Airflow: 214,700 m³/h Fan diameter: 800 mm Surface area: 3,428.3 m² Dimensions: 12,650x2,360x1,750 mm (LxWxH) Year of manufacture: 2020 Stock: 1 unit

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angular measurement system, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fgjdpfsi Ea Uyjx Af Ssd

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angle measuring system, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as per photos. Fedpfxei Ea Uvs Af Sjgd

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angular measuring system, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fgedpsi Ea U Dofx Af Sjd

Condition: good (used), V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -Diameter: 510 mm -Total width: 185 mm -Belts: 7 Fgedpfx Afjflhdfo Sed -V-belt width: 22 mm -Taper bushing mount: Desch 5050-80 Ø 80 mm (can be replaced) -Pulley: balanced Quantity: 1 piece available -Weight: 120 kg -other pulleys: in stock

Condition: used, V-belt pulley, belt pulley -V-belt pulley: Pulley 7 grooves -V-belt width: 17 mm -Intake: Ø69 mm -Dimension: Ø330 x 140 mm Fodpem At Ifefx Af Segd -Weight: 29 kg

Condition: good (used), V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush Fgodpfxewyvr Ae Af Sed -V-belt pulley: 7-groove pulley type SPA -V-belt width: 13 mm -Mounting: Taper bushing Ø42 x 125 mm (can be changed) -Dimensions: Ø143 x 125 mm -Weight: 9.5 kg

Condition: used, mileage: 91,660 km, power: 100 kW (135.96 HP), first registration: 12/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Total allowable weight: 3500kg Fgjdpfx Ajx Tvnksf Sed

Condition: used, Year of construction: 2010, x-travel 450 mm y-travel 400 mm z-travel 320 mm tool taper HSK 63 spindle turning speed range 0 - 10000 U/min rapid traverse 30 m/min control GE FANUC Series 16 i System for processing fittings, valve housings, etc. Fgjdpfxetqqqms Af Sed consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, travel paths module 3: X3 / Y3 / Z3 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø, (B-axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Fgsdpjqa Txqofx Af Sjd Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition